Hobbyist Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,916 Posts
Discussion Starter · #1 · (Edited)
Soon to be available is the HPI/Tamiya 37mm shock shaft. Not yet priced or part numbered but should be available sooner than later.

Why 37mm? Versitile. I worked with several different lengths over the years and with this one as I tested. I have decided on the 37mm length because it will work in every position on our cars. Including being able to move your center shock mount full forward even with pods in a stretched position & without stacking a super long ball end on it in most cases.

I will keep everyone up to speed as it is ready to ship, part number and pricing
 

Attachments

·
Registered
Joined
·
1,657 Posts
This a sincere question and not a dig...why are your front 1/8 axles sooooooexpensive???? With that grade of finish the machining cannot be that expensive. Over 20.00 for 2 axles and steering blocks??? Thought it was a mistake when i saw the price....Thanks
 

·
Registered
Joined
·
2,916 Posts
Discussion Starter · #3 ·
Who is charging you over $20 for the axles? That is not the price of them. I have cut and pasted what you should be charged for them in any hobby shop and what they cost from us. Discounts are in place that make this price very easy to use for any shop or track. Some of the kits have bearings as you can see. Plus, you get all the hardware with the axle kits as well. These prices are the same as wolfe were in the past and far better material to boot.

1/8th inch INLINE Axles and Axle Kits.
$13.00 #WT3216 One pair of 1/8th inch Axles ( includes (10) .020 shims & (2) aluminum lock nuts.
$16.00 #WT3213 One pair of 1/8th inch axles, (2) steering blocks, (10) .020 shims, (2) aluminum lock nuts.
$19.50 #WT3217 One pair of 1/8th inch axles. (2) steering blocks, (10) .020 shims, (2) aluminum nuts, 4 1/8x5/16 flanged steel bearings.
$28.00 #WT3217C Same as WT3217 but change (4) steel bearings to (4) ceramic
$16.00 WT3218 ( 2 ) 1/8th in axles with ( 4 ) 1/8x5/16 flanged steel bearings, ( 10 ) .020 shims, ( 2 ) aluminum lock nuts.
$25.00 #WT3218C Same as #WT3218 but change steel bearings to ceramic
 
1 - 3 of 3 Posts
Top