Hobbyist Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
409 Posts
If you use a small screwdriver u can pry the tabs up with a twisting motion, then pry up the axel close to the tabs and the axes will pop out. Then pop ur new axels in and use hammer and small punch to squash tabs back down(suport the base so the wheels are not sitting on the surfcace and u get a solid surface to hit) on the new axel. I can do these style swaps 2 to 1 compared to the grind and glue method, both work great but if you can get this down its much FASTER and EASIER.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top