Hobbyist Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
212 Posts
Discussion Starter #1
On the label of 3300's it says do not solder to battery directly. If that's the case how is everyone assembling them with battery bars?
 

·
Registered
Joined
·
1,951 Posts
Thats just a cover your @__ statement by the manufacture. You will find no manufacture recomends doing what RC racers do to batteries.
 

·
Registered
Joined
·
1,814 Posts
patcollins said:
Thats just a cover your @__ statement by the manufacture. You will find no manufacture recomends doing what RC racers do to batteries.
exactly what he said, So if you go and over heat the cell and it blows up they are not responsable. I am sure back in the day some one tryed to sue for a batterie blowing up in there face when they where soldering
 

·
Registered
Joined
·
212 Posts
Discussion Starter #5 (Edited)
Part of the problem is that the cell vent is right under the positive plate. If the cell vent is damaged from too much heat the cell can build up too much pressure.

THe warning is there just like the surgeon generals warning for cigarettes. Tobacco causes cancer but tobacco companies are not responsible.
Batteries are zapped and soldered but battery manufacturers are not responsible.
If you want to play I guess you have to take your chances.
 
1 - 5 of 5 Posts
Top