Hobbyist Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
I have a Ryobi weed eater model RY30020B, it starts fine and idles fine but when the I increase the throttle it boggs down. I pulled the carb off it is soaking in carb cleaner right now and has been since last night also took the bottom of the carb off and seen the diaphram looked wore, could that be my issue if so does anyone know the part number. Your help be appriciated and Thank you in advance.:)
 

·
Registered
Joined
·
1,767 Posts
Look at the carb it will be probably a Zama or Walbro, on the casting will be the model number for the carb like WT-123 for a walbro and C1Q and another number somewhere on the casting like S41 for the Zama, the you can go to their sites under Service/Aftermarket and look up the proper kit. Have a good one. Geo
www.zamacarb.com and www.walbro.com
 

·
Registered
Joined
·
38 Posts
Discussion Starter · #3 ·
Thanks for your help geogrubb it is a walbro carb I went to the local small engine shop purchased a G/D kit, found a breakdown of the carb and it took right off and ran like a champ. So thanks for your help and quick response you keep me from spending more $ then I had to.
 
1 - 4 of 4 Posts
Top