Hobbyist Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,536 Posts
Discussion Starter #1
Hey All,I'm still using FM radio equipment with a 3-channel receiver.Never really had to use a rx battery.With my tekins' and 1-cell,and now needing to use the rx pack,does one use a splitter extension to connect the transponder and rx pack to the batt slot or ummmm..........I don't want to smoke a transponder or anything,just want to be sure.Thanks alot for any help.Now that most all use 2.4 ghz, FM still works really good ;)
 

·
Premium Member
Joined
·
2,338 Posts
You should have 4 plugs total. You can plug the transponder into the 3rd channel and the battery into Batt. I wire a switch inline on the positive wire of the battery between the batt and the receiver.
 

·
Registered
Joined
·
1,536 Posts
Discussion Starter #3
davz,Thanks alot,I'm using the SMC rx pack,and it has the switch already installed.
This wil be my 2nd season on carpet.Last year running 4-cell,didn't need an rx batt.I just wanted to make sure I didn't do something I shouldn't.Thanks again.Merry Christmas!!
 
1 - 3 of 3 Posts
Top