Hobbyist Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
100 Posts
Discussion Starter · #1 ·
I need a front kick up plate for a RC10DS. Are they like they kick up for the RC10 and RC10T, only flatter. Could I just cut out a WHOLE chassis, including front kick up from one flat piece of material, ie Carbon Fiber, Aluminum, etc? I could probably make myself a RC10DS AND a RC10, if I can fab my own chassis for the DS.

Any help appreciated.
 

· Registered
Joined
·
100 Posts
Discussion Starter · #3 ·
Hold up.....

Will everything hook up the same, and all I have to do is straighten an ordinary T3 front kick-up. THAT would be MORE than awesome, cause I just-so-happen to have warped one. It would be NO prob to straighten it out. Im just picky about everything hooking up like stock.

Let me know.
Thanks
 

· Registered
Joined
·
100 Posts
Discussion Starter · #7 ·
Well

Thats most of the problem, I dont know what angle the front kick up would need. This is my first dealings with an On-Road vehicle. Length is another thing....would a DS Kick-up be the same length as the T Kick-up I have?

Thanks for helping
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top