Hobbyist Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I have an HPI Pro 3 and the Spur Gear got shreaded last time i ran it. It's a Spur Gear 116T. I need to know if there is a Metal Replacement part i can get or what i did wrong when putting my car together that may have caused this. Thanks ahead of time.
 

·
Registered
Joined
·
897 Posts
Kusig said:
I have an HPI Pro 3 and the Spur Gear got shreaded last time i ran it. It's a Spur Gear 116T. I need to know if there is a Metal Replacement part i can get or what i did wrong when putting my car together that may have caused this. Thanks ahead of time.
I will look into the metal gear, but you probebly had the pinion a little too far away from the spur, making it strip.
 

·
Registered
Joined
·
1,454 Posts
if i was you i would look into its yourself and talk to your hobbyshop, if you do look into it try and get a part # out of your mannuel and look on towerhobbies or stormerhobbies.com
 

·
Registered
Joined
·
1,005 Posts
Dustin said:
I will look into the metal gear, but you probebly had the pinion a little too far away from the spur, making it strip.
try crushing a piece of paper between the gears for a spacer when you tighten the motor.
 
1 - 5 of 5 Posts
Top