Hobbyist Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
783 Posts
Discussion Starter #1
Please help. I am planning to run a Losi SCTE indoors on a clay track. I need help with ESC settings. This is 2 cell also. All I know is I want something between a 14-16 tooth pinion. Have no clue where to set timing, punch, boost, RPM range,etc. PLEASE HELP!

Thanks
 

·
Registered
Joined
·
5,420 Posts
Please help. I am planning to run a Losi SCTE indoors on a clay track. I need help with ESC settings. This is 2 cell also. All I know is I want something between a 14-16 tooth pinion. Have no clue where to set timing, punch, boost, RPM range,etc. PLEASE HELP!

Thanks
The four pole motors do not greatly benefit from advanced timing. It makes them run hotter without necessarily giving you more power. Leave timing at low, no boost (which is only for sensored motors anyway), therefore no RPM range specification, and most people do not use punch control.

There! All your answers!
 

·
Registered
Joined
·
3,325 Posts
Yea, there's no need for timing, boost ect with a 4pole motor. I ran that same setup and still have my 3800 4pole as a back up motor. I ran 15T pinion in my SCTE and was a good match for medium and large tracks.
 
1 - 4 of 4 Posts
Top