Grabbed the Camaro auto lift set at TRU. My ? Is does anyone know If the Nubs that the top cars screws run through are removable? I want the lift for a Diorama I'm putting together but I don't want to open the set if the Nubs don't come off....
M2 auto lift ??????????
1 - 10 of 10 Posts
Nubs are casted into the Lift that screws the top Car down..... Grind the nubs off like I did in the pic below
I ground down the top nubs but after the picture was taken i ground down the bottom nubs so the Lift sits level
Ground the top nubs down further in this picture below
Nubs are casted into the Lift that screws the top Car down..... Grind the nubs off like I did in the pic below
I ground down the top nubs but after the picture was taken i ground down the bottom nubs so the Lift sits level
![]()
Ground the top nubs down further in this picture below
![]()
What did you grind with a Dremel ?
Dremel with a sanding drum 1/2" or 1/4"... Then I painted the tops with red model paint
Did the same on the bottoms of the legs
Thank for the tips Liv N Low.
Your quite welcome .... :thumbsup:
Joined
·
9,675 Posts
Hot knife would work as well
The ones you want to get are from the Homie Rollerz Series from Jada as they are 1 1/8" tall ... You will get a Car and 2 Homies in one pack..... The ones that are pictured are 1 1/4" to 1 1/2" tall..
I bought 100 of them (the ones in the pictures above) years ago on eBay for $10.00 I believe shipped. They go up and down in price on eBay so it never hurts to see if you can score a great deal when looking on eBay.
1 - 10 of 10 Posts
