Hobbyist Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
1,098 Posts
Discussion Starter #1
I'm looking for a company that might be making a 1s voltage lipo pack that has 2 seperate cells for 1/12th onroad cars. The 2 cells have to be wired in parallel to keep it 1s voltage. Does anyone know if they are being worked on?

Dave Irrgang
 

·
Registered
Joined
·
3,927 Posts
yes,i read somewhere on rctech
 

·
Premium Member
Joined
·
275 Posts
Hmmm...Interesting concept..current 7v saddle packs are 2 one cells in series? So if they were cut apart and wired in parallel would have a single cell 3.x volts and nearly double the amps...balancing?

Split a 1 cell equal wire in series get the same 1 cell back? need a balancer?

Ideas / answers?
 

·
Registered
Joined
·
3,927 Posts
2 cells parallel,like 2 small 2500 mah packs on each side of t-plate
 

·
Registered
Joined
·
131 Posts
if you can solder you can probably just take a pack and split it. Ex: take a 4s 2000, take the cells apart and wire it so that there are 2 cells on either side and you would have a 4000 3.x pack. i can never remember what is what with series and parallel. i think you would have to wire it parallel.
 

·
Premium Member
Joined
·
275 Posts
Think that is the real problem...fit the "pack" in what was designed for 4 round cells ( i.e 2 cells on a side)

Any LiPo would be a bitch to secure in that space and have enough amperage to run a race motor.
 
1 - 9 of 9 Posts
Top