Hobbyist Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
Base's were accomplished with just auto glazing putty.Using a stiff throw-away brush just dabbed alittle here and there,The glazing putty is ment for a thin application-But if you glob it on as it cures you get these natural crackels.The moon was done the same way but as the glazing is starting to cure took a eraser and end of a small paint brush to make the craters.
Then a couple coats of paint with washes and stipple a coat of flat clear and Voila.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top