KC Hobbies & Raceway 2009/2010 Season
41 - 60 of 263 Posts
Joined
·
6,222 Posts
Also wanted to post up that Super Stock truck can also run the traxxas brushless system
I'm heading home now
Later
I'm heading home now
Later
legends are going to be 17.5 1 cell right??
That is my plan!!!:thumbsup:legends are going to be 17.5 1 cell right??
mine to, im the one who told ya....lol, just dint know about all the others
all I have right now is stock slash
hope a few others show up
hope a few others show up
im sure there will be a few!!
Joined
·
6,222 Posts
Legends is 17.5 1 cell or Spec motor and 4 cell spec pack
With the 17.5 the largest pinion allowed is a 35 tooth
Spurs on ALL Legends is 81 all in 48 pitch
Alan I am pretty sure there will be a few Stock Slashes there I have a coupel floating around some where and Adam might bring 1 or 2 Hint hint
With the 17.5 the largest pinion allowed is a 35 tooth
Spurs on ALL Legends is 81 all in 48 pitch
Alan I am pretty sure there will be a few Stock Slashes there I have a coupel floating around some where and Adam might bring 1 or 2 Hint hint
Joined
·
6,222 Posts
off to lay the carpet and pipes down
See everybody tomorrow
I will have my laptop on today at teh school but will be working on the track but any ? just post up
See everybody tomorrow
I will have my laptop on today at teh school but will be working on the track but any ? just post up
How many legends do you have because I just sold the one I have so now I cannot run it so if you have an extra I could bring a 1 cell but I will be busy enough with what I already have going and helping with the races
I was also wondering if you wanted me to bring my sound system????
I was also wondering if you wanted me to bring my sound system????
Joined
·
6,222 Posts
The sound system isn't really needed but if you want go for it it can never hurt
I have a few legends so bring up any 1c you have
Do you have a spare stock slash or 2 you can bring up
I haven't had anytime to replace the parts on my rentals yet as I have been working and with Ang being sick not much time at the shop either
I'll give ya a call tonight if I remember
As for Directions
Directions From South I-75:
Take I-75 and cross the Mackinac Bridge. Once you have crossed the Mackinac Bridge merge onto US-2 west, exit 344B (second exit) toward Manistique/ Escanaba. Once on US-2 West go 0.7 miles and take a right onto 2nd Street. On 2nd Street, go 0.6 miles to First Street and take a right leading to Portage Street. Take a left on Portage Street and go 0.3 miles and you will see a sign and the St. Ignace Area Schools facilities on the left side of the road.
Directions West US -2:
As you are approaching from West US -2 go past Burger King, McDonalds, and once you see a Shell Gas Station on the left take a left turn on 2nd Street. This street is located just after the Shell Station. Once on 2nd Street go 0.6 miles to First Street and take a right leading to Portage Street. Take a left on Portage Street and go 0.3 miles and you will see a sign and the St. Ignace Area Schools facilities on the left side of the road.
Directions From North I-75:
As you are approaching St. Ignace from north I-75, merge onto the Portage Street exit 345. Take a right onto Portage Street and go 0.3 miles and you will see a sign and the St. Ignace Area Schools facilities on the left side of the road.
I have a few legends so bring up any 1c you have
Do you have a spare stock slash or 2 you can bring up
I haven't had anytime to replace the parts on my rentals yet as I have been working and with Ang being sick not much time at the shop either
I'll give ya a call tonight if I remember
As for Directions
Directions From South I-75:
Take I-75 and cross the Mackinac Bridge. Once you have crossed the Mackinac Bridge merge onto US-2 west, exit 344B (second exit) toward Manistique/ Escanaba. Once on US-2 West go 0.7 miles and take a right onto 2nd Street. On 2nd Street, go 0.6 miles to First Street and take a right leading to Portage Street. Take a left on Portage Street and go 0.3 miles and you will see a sign and the St. Ignace Area Schools facilities on the left side of the road.
Directions West US -2:
As you are approaching from West US -2 go past Burger King, McDonalds, and once you see a Shell Gas Station on the left take a left turn on 2nd Street. This street is located just after the Shell Station. Once on 2nd Street go 0.6 miles to First Street and take a right leading to Portage Street. Take a left on Portage Street and go 0.3 miles and you will see a sign and the St. Ignace Area Schools facilities on the left side of the road.
Directions From North I-75:
As you are approaching St. Ignace from north I-75, merge onto the Portage Street exit 345. Take a right onto Portage Street and go 0.3 miles and you will see a sign and the St. Ignace Area Schools facilities on the left side of the road.
Joined
·
6,222 Posts
Hey Adam forget to tell ya make sure the transponders are charging and also bring up my extra MRT's for me too
Thanks
Thanks
They are charging and will do on the transponders!!!Hey Adam forget to tell ya make sure the transponders are charging and also bring up my extra MRT's for me too
Thanks
I do have a couple of slash trucks I can bring up if needed!!!
I will bring a few recoils as well just in case someone else wants to try to run them!!!
Also so everyone knows the track is complete I got the Velcro today and put the track down it flows real nice!!! It is not a super challenge but we figured for our first one we should keep it simple We will have our first race next Saturday with on-road which every type of vehicle is welcome and Sunday is off-road with the track layout being the same without the jumps so come on down!!! We will have practice everyday from 12 noon to 8pm but this Monday and Tuesday we will be closed to go down state
Thanks
adam, you get them tires ground down????
casey, call me at home, have a question for ya.
All set ready to roll!!! I cut them to 2.220 so you can get them scrubed in to 2.2 at caseys place in a few runs and they should be good!!! I will see ya in the AM hopefully I will be up just bang on the dor if it is locked!!! LOLOLOLLadam, you get them tires ground down????
Joined
·
6,222 Posts
Remember if Alan gets there without Mike he needs to go get him
Looks Like a Great turn out
And with the help from Adam we should have a nice fleet of Recoils and Stock Slashes
See all of you folks Sunday
BTW I am still at the track too
I hope to leave by 3 tonight
Looks Like a Great turn out
And with the help from Adam we should have a nice fleet of Recoils and Stock Slashes
See all of you folks Sunday
BTW I am still at the track too
I hope to leave by 3 tonight
Why would you still be at the track???Remember if Alan gets there without Mike he needs to go get him
Looks Like a Great turn out
And with the help from Adam we should have a nice fleet of Recoils and Stock Slashes
See all of you folks Sunday
BTW I am still at the track too
I hope to leave by 3 tonight
LOLOLOL Oh yeah I am stil at mine as well!!!
Joined
·
6,222 Posts
I love the smell of traction compound and the feel of CRC carpet sooooo much
Really it is just taking me longer since it is all me doing it and I just want it as best can be for everybody coming up and down and over here
Really it is just taking me longer since it is all me doing it and I just want it as best can be for everybody coming up and down and over here
Well I am sure it will be great!!! I am bringing the boy and his Stampede so I hope there will be a novice class if not I will let him run a stock slash
41 - 60 of 263 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Hobbyist Forums
A forum community dedicated to all Hobbyists. Come join the discussion about die cast, models, slot cars, radio control vehicles, classifieds, swaps, and more!
Full Forum Listing
Recommended Communities
Join now to ask and comment!
