[lukin]

Hey guys...hoping someone can help me out with a question before I purchase. I'm needing some hubs and an axle for an old RC10L car, so I'm thinking about purchasing the IRS Offset D-Ring Axle and Hubs Kit - BLUE
[IRS2134BL]. Will this kit work? I'm thinking so since it's offset, but wanted to be certain befor I pull the trigger. Thanks!

 

[John Maher]

The hubs are the same length as the ones that come in the 10L4 kit. IRS originally supplied the hubs and axle for the 10l4 kit.

 

[Bill Johnson]

If its "An Old RC10L", and if its a "Wide" car, it wont work.....

 

[lukin]

It's a narrow composite craft 10l that I'm building to run, not a wide car. It has the older offset t-plate instead of the newer symetrical t-plates.

Sounds like it should work.

 

[John Maher]

you will need IRS2120BL, it has the 1.120" hub, the 1.40" hub in the other kit will be to wide. I have a Composite Craft 10L angle X chassis with the t-plate that you are using and it uses the narrower hub. If you were using the newer style pod and symmetrical t-plate then you would use the wider hub. Which chassis are you using?

 

[lukin]

Cool....same chasis. Thanks for the help! I almost made another mistake...haha