Hobbyist Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
311 Posts
If nothing else your post is an advertisement for the acrylic paint you used. The ammonia should have just stripped it clean.
There's always pinesol and/or Easy off
Be careful with the Pinesol - it can soften styrene.

Testors Acryl will come off with denatured alcohol; if there's paint stuck in a deep detail, hit it with an old toothbrush and some denatured alcohol and it should come off.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top