Hobbyist Forums banner
1 - 2 of 2 Posts

54 Posts
Servo Reversing

1. Call the Set-Up mode screen by pressing the UP and DOWN keys simultaneously at the initial screen.​

2. Call the Servo Reverse function screen by pressing the UP or DOWN keys in function map order.​

3. Select the channel, dial, or knob you want to set by pressing the SELECT key. ST: Steering, TH: Throttle, 3CH: Channel 3​

4. Set the servo operating direction with the + or - key. NORM: Normal side, REVE: Reverse side​

5. At the end of adjustment, press the UP and DOWN keys simultaneously. Or​

press the DIRECT key twice. (The display returns to the initial​


Or go to the Futaba manual at
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.