Hobbyist Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
6,122 Posts
1. Check that armature is not loose in starter housing.

2. Check that gear is the correct one for the type of starter ring on the flywheel.

3. Check the starter gear when installing bevel on gear should face up to the starter ring on the flywheel.

Thats all I can think of....

Best of Luck.....
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top