Hobbyist Forums banner

1 - 20 of 1005 Posts

·
Registered
Joined
·
1,289 Posts
Discussion Starter #1 (Edited)
2009-2010 Oval season starts Tuesday October 13th

Tuesday Evenings Oct 13th -April 27th

Heats Starting at 7pm, 3 Rounds of qualifying

Classes: 13.5 LiPo Single cell, COT Spec Class, Legends and S/K

Upcoming events Equalizer April 2010. SUNDAY APRIL 11TH​

Racer List as of 4-2-10
17.5 COT
1. Chris T.-HD
2. Brandon H.-Mcpappy
3. Dale H.-HD
4. Greg A.-R5
5. Nick H.-KSG
6. Wade B.-HD
7. Eban G.-RIP
8. Robbie G.-CW
9. Lenny T.-R5
10. Dennis A.-HD
11. Bill P.-LE
12. Bill B.-RIP
13. Mike G.-KSG
14. Arhtur B.-HD
15. Richard F.-trinity

13.5 COT
1. Andrew P.-?
2. Luke H.-RIP
3. Gerald F.-R5
4. Jody B.-KSG
5. Ryan P.-T2C
6. Shawn W.-HD
7. Jim M.-HD
8. Wade B.-HD
9. Eban G.-RIP
10. Scotty F.-R5
11. Brad H.-LE
12. Dennis A.-HD
13. Puf19-not 100%
14. Anthony P.-Hybrid
15. Bill P.LE
16. Nick D.-HD
17. Bill B.-CW

S/K
1. Ryan P.
2. Richard F.

10.5
1. Nick D.-HD


More to come!
Please visit cumberlandrc.com for more information or post your questions here on the thread..Hope to see some new faces this year.

Located at:
65 Gray Road
Falmouth, ME 04105

Thanks
Ryan Pablo
Race Director

P.S. Track Photo below taken 8-15-09...125ft run line..Don't mind the mess in the background


I'd like to get a list going of who is intending to race the April Equalizer. Please send me an email with your full name and the class or classes that you intend on running. This does not obligate you to come but will help us be prepared for the correct amount of racers. I will post the list and update here on the forum


EQUALIZER Classes and Rules:

LEGENDS:
Motor: Trinity Street Spec Part #SS2226
Gearing: 22 tooth 48 pitch pinion and lower with 81 Tooth Spur
Battery: Trinity Spec 4 Cell Part #2270
Traction Compound: Any Odorless Compound (Jack the Gripper, Niftech, ect..)

S/K:
Motor: 17.5 Novak SS only
Speed Control:Novak GTB's, LRP Sphere SPX-SXX, NO Tekins, Advanced Electonic Black Diamonds, Novak Kinetics or Castle Creation Mamba's
Battery: SMC 25C 4000 mAh 1s only
Tires: Spec yellow banded (any foam compound)
Weight: Minimum 34OZ (2lbs 2oz)
Traction Compound: Odorless only Example: Jack the Gripper, Niftech, Ect...
Gearing: **No gearing limitations**

*Also Allowing Spec Trinity brushed motors w/Trinity 4Cell Spec Battery
Motor: Trinity Spec 21turn
Brushes: Finish line "F" brushes only, these have a F stamped in them
Battery: Trinity Spec 4cell
Weight: Minimum 36OZ (2lbs 4oz)
Traction Compound: Odorless only Example: Jack the Gripper, niftech, Ect...
Gearing: **No gearing limitations**
This class will follow all other SK KAR rules

COT-17.5
BODY: Any Roar Approved COT Body, front air splitter must remain, no holes other than for antenna, all windows must remain
BATTERY: SMC Lipo Single cell part #SUM4025S or Trinity Spec 4 Cell Part #2270, plugs of any manufacture, no direct battery soldering,
MOTOR: Novak 17.5 SS Brushless motor Part#3417 only or Trinity Street Spec Part #SS2226, stock springs, "f" brushes only, armature spec s labeled only, no drill balancing, no bearings, no alterations of the timing tab/ring, brush drilling/shaving allowed
Speed Control:Novak GTB's, LRP Sphere SPX-SXX, NO Tekins, Advanced Electonic Black Diamonds, Novak Kinetics or Castle Creation Mamba's
TIRES: Spec foam tires with yellow identification band
GEARING: 81 tooth 48 pitch spur gear, 23 tooth 48 pitch pinion or smaller w/Brushed Motor, Open Gearing for 17.5 Blrushless motors
WEIGHT: Brushed w/Spec 4 cell 2.5lbs=2lbs 8ounces (minimum) w/transponder, 36 ounces w/Lipo & 17.5 Novak Brushless
BODY HEIGHT: 4-3/8" (minimum)
SPOILER/WING: Manufactured included wing only, mounted as intended by manufacturer
Traction Compound: Any Odorless Compound (Jack the Gripper, Niftech, ect..)

COT-13.5
BODY: Any Roar Approved COT Body, front air splitter must remain, no holes other than for antenna, all windows must remain
Weight: Minimum of 36 ounces
MOTOR: Novak Brushless 13.5SS or Novak Ballistic motor ONLY (No Cooling of motors, sprays or coolers)
BATTERY: Any ROAR Approved 1 cell Lipo up 50C and 5000 MAH
SPEED CONTROL: Tekins must have firmware 200 or lower versions, Novak GTB, LRP Sphere, SPX or SXX…NO Castle Creation Mamba’s, Advanced Electronic Black Diamonds or Novak Kinetics..
VOLTAGE: Maximum pre-race voltage of 4.22V (No Heating or cooling of Batterys!)
BODY HEIGHT: 4-3/8" (minimum)
SPOILER/WING: Manufactured included wing only, mounted minimum 1/4" above rear deck lid, aftermarket wing mounts allowed
Traction Compound: Any Odorless Compound (Jack the Gripper, Niftech, ect..)

MOD-10.5
BODY: Any Roar Approved Nationwide Style Body
MOTOR: Any ROAR approved 10.5 Brushless motor
Weight: Minimum of 36 ounces
BATTERY: Any ROAR Approved 1 cell Lipo up 50C and 5000 MAH
SPEED CONTROL: ANY
VOLTAGE: Maximum pre-race voltage of 4.22V (No Heating or cooling of Batterys!)
BODY HEIGHT: 4.25" (minimum)
SPOILER/WING: Any ROAR Approved wing and or Spoiler
Traction Compound: Any Odorless Compound (Jack the Gripper, Niftech, ect..)
 

·
Registered
Joined
·
901 Posts
You can expect a great time and very good racing, in 13.5 A main drivers are only .05 apart! I am looking forward to it! I will take care of waxing the ice!! Lol
 

·
Registered
Joined
·
1,289 Posts
Discussion Starter #10
what are your rules for cot spec class thanks donald
We are currently running COT as follows....it's a bit complex but basicly running 17.5 1s 25C w/spec 4cell and spec brushed motors. I project the 4cell/brushed folks will be completely converted to 17.5/lipo 1s setup by the 1st of the year.

COT Car of Today (This Class is running the Same as Tour "17.5 Sportsman truck" w/COT bodies and Spec Yellow Banded tires)

This Class is intended for Hobbyist to intermediate level racer

As of 10-13-09 (rules may be changed/updated anytime)

Any Pan Car Chassis
BODY: Any Roar Approved COT Body, front air splitter must remain, rear bumper may be cut out, no holes other than for antenna, all windows must remain
BATTERY: SMC Lipo Single cell part #SUM4025S or Trinity Spec 4 Cell Part #2270, plugs of any manufacture, no direct battery soldering,
MOTOR: Novak 17.5 Brushless motor Part#3417 or #3617 only or Trinity Street Spec Part #SS2226, stock springs, "f" brushes only, armature spec s labeled only, no drill balancing, no bearings, no alterations of the timing tab/ring, brush drilling/shaving allowed
TIRES: Spec foam tires with yellow identification band
GEARING: 81 tooth 48 pitch spur gear, 23 tooth 48 pitch pinion or smaller w/Brushed Motor, Open Gearing for 17.5 Blrushless motors
WEIGHT: Brushed w/Spec 4 cell 2.5lbs=2lbs 8ounces (minimum) w/transponder, 36 ounces w/Lipo & 17.5 Novak Brushless
BODY HEIGHT: 4.5" (minimum)
SPOILER/WING: Manufactured included wing only, mounted minimum 1/4" above rear deck lid, aftermarket wing mounts allowed
Traction Compund: Any Odorless Compound (Jack the Gripper, Niftech, ect..)
 

·
Registered
Joined
·
1,876 Posts
this sounds like the rules we have in place at are track in plattsburg ny cot 17.5 novak only motor and esc and spec bsr tires with yellow ring and 4000 25c smc lipo only with mcallister cot body only cut at factory line and no cut out the rear not sure on the weight sure its close to the same we are having tour between two tracks this year north vs south tour and its going to be great what is the date of your turkey shootout race maybe if it isnt on are tour race or are trophy race i can get a couple of us cot guys to come race thanks donald
 
1 - 20 of 1005 Posts
Top