Hobbyist Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6,116 Posts
set low speed and high speed (load) adjustments to 1 1/2 turn from seat to start, after engine is running you will have to fine tune these adjustments. The idle stop screw does not have a set amount of turns, this is a stop screw and needs to be set for proper idle rpm's.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top