Hobbyist Forums banner

1 - 19 of 19 Posts

·
Registered
Joined
·
2,825 Posts
Discussion Starter #6
Thanks!

One small issue. On another forum someone pointed out that the bottom button should be silver.



Sure enough, it is and smaller. I painted some domes gloss aluminum, and will replace it tomorrow.

Edit: For some reason the forum thinks that photo is sensitive.
 

·
Registered
Joined
·
5,762 Posts
Excellent as always! I have a feeling those large discs on the original prop might have been plastic tiddly-winks..errr..chips.
Now as a companion piece you need Spock's remote control. Then you're 2/3rds of the way to the Communicator from 'The Cage'. :)
 

·
Registered
Joined
·
5,553 Posts
Thanks.

The 2 main parts are 3D printed.



The red and yellow buttons are cut down light lenses from a nightlight.



The rectangle is a section on plastruct filled with Aves, then sanded down to 1/2 width.

The 2 gold domes are 12mm googly eyes.
Googly eyes! That is funny, I am going to use painted googly eyes on one of my projects!

Scott
 
1 - 19 of 19 Posts
Top