Hobbyist Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter #1
My 4300 motor has a "miss" in it (sorta like a car with a plug wire off..) I found a bad solder joint thought that fixed it and it didnt.. Anyone else had this problem.. I run a sphere and 4300 with sintered rotor..
 

·
Registered
Joined
·
452 Posts
flemingo
when the next time you guys are coming to cincy?
We need to fix that problem. Never ever had that problem
with that system. Its killing me now your still having the
problem....... I will bring my other ESC to pinpoint problems.
Kevin J.
 

·
Registered
Joined
·
122 Posts
Make sure the Rotor Doesnt have to much play in the can if so, try to shim it so there is not alot of play in the rotor
I had the same problem!

Cody Gallogly
Team OHP!
GO FAST RACE PARTS
 

·
Go Fast, Turn Left
Joined
·
4,799 Posts
I'd put my money on the LRP too. I had the same problem. Tested 3 different Spektrum RX's, with and without servo's plugged in, Futaba FM radio system. Nothing made it better.
The real PITA was I could not always reproduce the glitch. Like Krisfo said.
Put in a brand new GTB. No more problems.
 
1 - 6 of 6 Posts
Top