Originally Posted by rcgen
I had a good day learning how to set the Impact at yesterday's practice for the Speedway race here in Daytona Beach. I decided to run 13.5 Stock blinky. My issues from a couple of races ago apparently was do to not turning off the lipo cutoff. The car would run for a few laps and then loss of power to the motor, like it thermalled. Yesterday, with the help of Ron98, I was looking for the wrong lights to have the lipo cutoff off. It worked great after that.
I would make sure to ground it as well. I have 2 years on an impact with good luck. I did have an issue with static, where it would cut out for half a lap, then back on. A ground wire fixed that issue.