2009 Hyperdrive ......................

[ToddFalkowski]

Originally Posted by ncracer1st

so no one can or will help me with a pro3 carpet setup. is there no one on here from hyperdrive? hyperdrive dont have anyone on there forum either.

With your post being the last one on the last page, and posts adding quickly, it happens where they get, well, overlooked. PM trussell on here, his is pretty good.

[MikeNum8]

Originally Posted by ncracer1st

so no one can or will help me with a pro3 carpet setup. is there no one on here from hyperdrive? hyperdrive dont have anyone on there forum either.

What kinda track are you running? Send me a email at DRP74@Rochester.rr.com i'll send you a set up sheet. Sorry missed your original post. But like said by another post things add up quick and sometimes they get over looked. Feel free to Email or PM any of the team drivers as i'm sure we are willing to help.

["Frank Ulbrik"]

Carpet Setup

CHASSIS STUFF
Cut/Un-cut ... cut and or PRO-Built conversion
Solid/Slider... slider
6-cell/4-cell... 4-cell
Tray Position... back

RF
King Pin... rc4less
Spring rc4less... Green prog
Spring Cups... rc4less
Preload Shims... No preload
Axle...rc4less
Shims behind axle... none
Caster Block... HD
Caster Block Hole... 3 down
Caster setting... 3deg
Locator... 3
Arm Spacing... .060
Long/Short Wheelbase... Short
Camber... 1.5
Tire... grey/silver
Tire OD... 2.15

LF
King Pin...rc4less
Spring...rc4les green prog
Spring Cups...rc4less
Preload Shims... no preload
Axle...rc4less
Shims behind axle... none
Caster Block...HD
Caster Block Hole... 3 down
Caster setting...2deg
Locator... #3
Arm Spacing... .060
Long/Short Wheelbase... Short
Camber... 2deg
Tire... white
OD... 2.16

CENTER SHOCK
Shock... hpi or tam
Spring... 7lb
Oil... 50
Piston... #2
Length... N/A
Shock Mount Hole... 3 down
Chassis Mount Hole... 2nd & 3rd back

RR
Shock... asc
Spring... 10lb
Oil...40
Side shock ear mounting hole...2nd down
Ball Cups... stock in kit
Ball Cup Shims... 0
Tire... white
Tire OD... 2.16

LR
Shock...asc
Spring...12lb
Oil...40
Side shock ear mounting hole...2nd down
Ball Cups... stock in kit
Ball Cup Shims... 0
Tire... White or Pearl
Tire OD... 2.16

REAR AXLE/POD
Spur... 112
RR Hub... L
LR Hub... S
Axle Carriers... kim #2's
RR Shims... .060
LR Shims... .060
T-plate... .060 hd straight
2 or 3 screws... 2
t-plate shims... 0
t-plate position... offset
pod position... offset
Rear Steer slugs... 0
Long or Short wheelbase.. short
Wedge... N/A

[ncracer1st]

thanks frank, thats what i was looking for.

[BudD]

Big thanks to Barry and Joe for a great car! Stomped the 13.5 1s track record today at East Ridge! Also beat the current 10.5 1s record in practice.

[HitmanIII]

Originally Posted by BudD

Big thanks to Barry and Joe for a great car! Stomped the 13.5 1s track record today at East Ridge! Also beat the current 10.5 1s record in practice.

Well good job, BudD

[philb1]

Running my Pro 4 in 21.5 at HobbyPlex in Omaha, car has gotten better every week. TQ last week but failed to get both screws tight setting my mesh(Yes I have a screw loose!)

TQ and win this week with very easy to drive car, THANKS Barry & Joe!

Wore my "Pro-Built" shirt too...that is probably worth a tenth Frank