i have a honda engine that is a vertical shaft on a billy goat brush cutter. having issues with an oil leak and compression. i did a compression test and got a reading of 60 psi after 8 pulls and would not go higher. i removed the valve cover to check valve clearance and roughly 3 to 4 ounces of oil came out of the valve assembly. i do not see any visual crack or any thing in head gasket nor in the valve cover gasket. i did look in depth and found some oil coming out of the lower right hand port that goes to the valve assemble. did not know if you had any ideas on what to look for in this issue. any help would be nice.
can send pictures if needed.
can send pictures if needed.