hello I race on a carpet oval track and I am looking ot change the rear toe in on my truck I looked into the t5015 rear piovt it was same as original part just blue and lighter is there a rear carrier I can use instead or is ther another rear piviot that is the way i would like the rear piviot ..I cant find any thing please help..


tintman

I haven't tried it, but I'd assume you will have to address this at the other end of the A-arms... I'm working from memory here, but I believe Trinity makes rear HUBS that have a built in angle between the hinge pin and the hub -- installed on way, they ADD rear toe-in (for Nitro offroad), but if you installed them "backwards", they would REMOVE some (all?) rear toe-in...

Maybe someone can contribute some more real world info...

I was told to use two degree hubs and put them on backwards. Right on left-left on right. This put me at O degree toe.

Same here, you do put left on right and right on left.

i'll try to find some hubs I was hoping to find some plastic not get into the aluminum ones to see if works I have seen aluminum ones on the trinity site for sale...thanks guys

Part # LOSA9808 I believe is the XXXNT 2 degree rear hub carriers. Mounted on the opposite side will result in "less" but not zero toe in since the truck comes with 3 degrees per side. I have a couple sets on order right now for a couple guys. The only way to get true zero that I know of right now is have someone make you a rear pivot block with zero toe in.

oval man:
thanks and your right about the pivot .. I got for x-mas(got it my self :lol: ) trinity rear hubs 2 degree truned them backwards and have 1degree now not 3 you gotta do the math *L* it almost looks straight and it will probably be better than 0degree for handeling....thanks for all the help BTW where is your place

Glad you got things figured out. My track is located in Smethport, Pa. We are about 2 hours south of Erie or if you've ever heard of it, a half hour south of Bradford.