zinger77
12-14-2004, 11:10 AM
need a little help with basic setup. what springs? things like that any thing that will help. thanks everyone.
zinger :wave:
zinger :wave:
|
View Full Version : xray t1 ft zinger77 12-14-2004, 11:10 AM need a little help with basic setup. what springs? things like that any thing that will help. thanks everyone. zinger :wave: rayhuang 12-14-2004, 02:18 PM Carpet or asphalt, rubber tires, foam tires, high bite-lowbite? Cool? zinger77 12-14-2004, 03:15 PM carpet with foam tires.low bite thanks ray rayhuang 12-14-2004, 04:09 PM Well-I think that will be easy. Shocks Front 40 wt Hudy oil 4-holes open with Violet springs Rear 30wt Hudy oil 4-holes open with Blue Springs Put the lower hingepins both in the middle roll position and run 3-deg caster blocks up front. IN back-start with 2mm shims for toe in and the longest wheelbase. Try 1mm shims for toe-in-in back if you want more steering. Front camber link is short and bottom hole. Rear camber link is on bulkhead and short position on hub. Now-what size tire and I'll try and recommend droop numbers to try. But-you can start at 0-in front and 4 in back as a good start on most size foam tires. Ray zinger77 12-14-2004, 06:03 PM tires are 2.5inches purple on rear plaid on front thanks for all your help ray john rayhuang 12-14-2004, 07:06 PM John, Since its low bite-the 2.5" tires may be okay-but I would really recommend you true them 2.40" to start and regardless-you shold be able to start your droop at 1 and 5 with those tires. But-at 2.5" tires-your lookng at a better possibility of chunking them off the rim if you hit something. Ray XXX-SCapece 12-14-2004, 07:41 PM Can you give me a base setup for the Evo 2 on a flowing asphalt track running 19turn and Cs-22's. I've got the car coming in on Friday and a race Saturday. Thanks chad zinger77 12-14-2004, 08:27 PM ray thanks for all the help thanks again john vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.
|