micyou03
10-20-2004, 11:49 PM
Here's my 1/43rd set up for now I finished my table expansion project early last week (5' X 12' table) and set up my track over the weekend. its all wired except for my jumpers which will be done probablt tonight. I used foam core board for the turn borders. They work pretty good. When I accumulate enough track for a more permanent layout I am considering covering my table with the stuff and then just cutting out where the track goes. I am also considering the Ninco borders. I will expand the layout over the next few months.
http://members.cox.net/micyou3/10-17-04 Tablea 01.jpg
http://members.cox.net/micyou3/10-17-04 Tablea 03.jpg
Here are my driver stations.
http://members.cox.net/micyou3/10-17-04 Tablea 02.jpg
The lap counters I was using as straights were giving me headaches and throughing my cars off the track when I hit the notch where
the counter was so I bought the "Fast Lane Super Slicks 1:43 Dual Loop Electric Raceway Set" at TRU and replaced them with straights.
http://members.cox.net/micyou3/10-17-04 Tablea 05.jpg
A couple of Artin cars.
http://members.cox.net/micyou3/10-17-04 Tablea 04.jpg
http://members.cox.net/micyou3/10-17-04 Tablea 01.jpg
http://members.cox.net/micyou3/10-17-04 Tablea 03.jpg
Here are my driver stations.
http://members.cox.net/micyou3/10-17-04 Tablea 02.jpg
The lap counters I was using as straights were giving me headaches and throughing my cars off the track when I hit the notch where
the counter was so I bought the "Fast Lane Super Slicks 1:43 Dual Loop Electric Raceway Set" at TRU and replaced them with straights.
http://members.cox.net/micyou3/10-17-04 Tablea 05.jpg
A couple of Artin cars.
http://members.cox.net/micyou3/10-17-04 Tablea 04.jpg