Can any one posts some info on how this car handles out on banked concrete?

Congrats to Arnie Fie on taking down the win at the ROAR Carpet Oval Nats in 1/10th Mod...and the tally in the win column continues to increase...:dude:

Arnie, Good job! Red or Black paint this time?

Congrats Arnie ,you the man ,,,,,hope to see all you guys in Delaware again ....
ROCKET

Good Job Arnie!!

See ya' in Florida

John Bath

Arnie, congrats on the big win ! ...... Tony should give all you guys a raise ..........:thumbsup:

Not as big of a win as Arnie's, Custom Works gets first ROAR Brushless win, THANKS for a great car.

Way to go Phil!! Congrats, you deserve it!!

__________________
Brent Pearcy
Bulit Motorsports (http://www.bulitmotorsports.com/), TQCells (http://www3.sympatico.ca/tqcells/), BSR Racing Tires (http://www.bsr-racing.com/), SROC Racing (http://www.geocities.com/s_roc_racing)

Hey all, thanks for the kind words. Halo was good to CW last weekend.

In Stock it was a CW front row with Steve Salvas TQ'ing and Terry Warner rolling out 2nd. The Stock "A" was tough, the start was amazing, all 10 cars on a heads up start were across the line in under 2.5 sec without a wreck. 19-Turn saw TJ Domark TQ with the first TrueSpeed 19turn motors we will be selling and along with his car was definately the man to beat. Dusty Kemp, Dave Zipp and Salvas also had their CW cars in the 19-Turn show. Corey Heft and Koback were also fast in 19-Turn, but TJ definately had it for the entire 4 minutes every run. In Brushless Phil Beardshear looked to be driving a Cadillac all weekend as he nailed down the win. As for mod, I did not find any speed until after qualifying was over, found a much better set-up and Jim found some motor and the combo helped us find the lap+ we were off. To be able to out run guys in the main like Pete D and Walter was rewarding.

Wish I had more time to talk at Halo, but it was nice matching Hobbytalk Handles with faces last weekend. We'll have my set-up posted on the CW site soon along with Steve Salvas' winning Stock set-up from the "Classic" race held at St. Roch in Quebec back in April. Steve handled the field of 87 Stock entries with his Aggressor for the win.

Time to start getting ready for the Seaford race....

From TJ Domark -- This is my Nats. motor Set Up - I used to TQ by 1/2 lap over 2nd and 3rd place and over a full lap on the rest of the field.

19T TrueSpeed
Timing: 30deg
Springs: Purple + / -
Brush: 4383
Gearing: Gear about 1 tooth lower then your *Cobalt / D5 base cans

* What I liked about this set up was how consistant it was. My fall off w/ a Cobalt or D5 base can was about 3 tenths over 4min

* The TrueSpeed 19T was only falling off about 1.5 tenths over 4min

*This motor @ about the 2min. pt in the race would walk away from the field.

** Def. a Big Thumbs up for TrueSpeed 19T, :)

* Sorry I couldnt post that Ingural Win --- that the motor def. deserved --

So...a little more info on the new mill would be nice....

Arnie: You know any shop or onliner that has this car in stock?

I have seen NEW kits on e-bay with the buy-it now price..

What I'd like to know is where are the TRUESPEED motors available from?

For being such a great car they sure are hard to get/find?????

For being such a great car they sure are hard to get/find?????

Have your local hobby called CustomWorks?

Steve.

Have your local hobby called CustomWorks?

Steve.
Yeah right!!! That would be a no. We are forced to buy most of our stuff online. Our hobby shop could sell you all kinds of T-Maxx hop ups though. They could care less..Superior in orlando I think stocks them but I'm not sure. It's just I always see someone asking "do you know where can find one"

........It's just I always see someone asking "do you know where can find one"Hey Chris, trust me, this is how it is with every great oval car. Oval chassis companies are pretty small compared to all the others & it is very hard for them to get enough graphite cut & aluminum milled to keep up with the demand. Trust me guys this car is worth the wait, I had two of them & thought I'd go back to a KSG so I sold one of them. Boy I wish I had my 2nd CW back now!

__________________
Brent Pearcy
Bulit Motorsports (http://www.bulitmotorsports.com/), TQCells (http://www3.sympatico.ca/tqcells/), BSR Racing Tires (http://www.bsr-racing.com/), SROC Racing (http://www.geocities.com/s_roc_racing)

Y-city hobbies in Zanesville OH has a couple of kits on hand.They also have extra bumpers tplates and other items for the car.There # 740-455-3025 they open @ 5:00 PM just ask for Kevin.

Chris Garland: Superior does stock our products in Florida. Good on-line guy is KippsHobbies.com if you want to go that route. Due to problems out of our control, we have been out of kits for a couple weeks, but always keep replacement parts on-hand. What good is a car that you can not get parts for? We may be hard to find now but give us time...BTW kits will be back in stock on Monday.

JBM38: TrueSpeed motors found in the same hobbyshops you find other CW products! LOL You coming to Seaford?

BrentP: This is not how we want it to be but thanks for understanding.

Thanks Arnie.. It is a good car.. Dave P. here has two getting around the track pretty good.

Chris, I bought my kit from kippshobbies as well (no one else had them)..... when i bought mine he had spare parts except the coveted shock towers that a bunch of us are anxiously waiting to get a hold of. I was able to get a spare front bumper and bottom pod plate ....... that was about a month ago. Send him an e-mail he's good about getting back to you and answerwing questions.

Rich Boehmler

Cool thanks Rich

Hey Chris there are a couple on sale in the swap section. Donnie, one the Ga racers is selling his or is wanting a trade...

Hey Chris there are a couple on sale in the swap section. Donnie, one the Ga racers is selling his or is wanting a trade...
No more used Oval cars. My last two have been new and I'd like to keep it that way. Thanks anyways Eugene

I must say I have bought my cars from Superior and the othe from Kipp. if I had to do it over again www.kippshobbies.com all the way. he is just such a nice guy. you don't get to meet people like him often.


As for the handling and adjustablity of the Agressor. this is the best oval car I have ever owned and driven. the graphite is high quality and superiorly cut. design is well thought out and revolutionary. and the car is just flat out fast. I ran 4 batteries with my 19T car and made the decision that I needed another one for stock.

Cneyedog: Oh yeah...shock towers. They should arrive and will go out tomorrow if everything goes as it was told to me. The towers have been beefed up and there is a brace available to eliminate flex when running really stiff side springs on high bite tracks. The brace fits the newer tower and is available separately, however the brace will be standard in the kit now.

Hey Arnie,

Is the part number for this new brace/shock tower listed yet? Also, are there any pics so I can see how it fits?

ARNIE, I'd love to go to Seaford but, I think I would get charged with going AWOL!!!:p

But, I'll see ya' when I get home from this big sand lot.

Later John B.

Goodwreck32001: Tower is still the same part #8012, the brace is #8019. No pics yet of the brace but basically it is a foot that runs from the tower to the chassis.

JBM38: You'd probably be the front-runner for the longest distance traveled award if you did come....LOL

Anyone run an Agressor with a novak 5800 brushless on a banked concrete oval? What is a good set up (cap tires) to start with? Side shock springs/oil, center shock spring/oil, front springs, tires? Thanks Ralf 13

You going to BMS Ralf????

__________________
Brent Pearcy
Bulit Motorsports (http://www.bulitmotorsports.com/), TQCells (http://www3.sympatico.ca/tqcells/), BSR Racing Tires (http://www.bsr-racing.com/), SROC Racing (http://www.geocities.com/s_roc_racing)

Been thinking about trying it out. I am also re-building a used CW sprinter for the dirt this summer. There is another track a little farther away that I am hoping to make a few weekend trips to. Thunder Alley R/C Speedway has a Concrete Oval that races brushless on Saturday evenings, and Dirt Oval (also brushless) on Sunday afternoons. I am hoping to do a couple of weekends this summer there for both tracks. Ralf 13

WOW what a car, first time on the asphalt track this year every time on the track it got better. :roll: How about everybody ?http://www.triclone.net

Just ran mine on asphalt for the first time saturday, TQ and a Win, What an awesome ride.
Doug P

If it runs as good as it looks, it would be awesome.

Just ran mine on asphalt for the first time saturday, TQ and a Win, What an awesome ride.
Doug P

Doug, did you run at Seaford, or Mushroom bowl, and how's 'bout some setup? Later, beach

Beach - I was at Seaford. Not sure what info your looking for, but i ran a dbl purple RF, purple RR and dbl pinks inside. MD Dodge w/ a med wing. email me and let me know if you need more info.
Oh yea did i mention this car is just as good on the asphalt!

Doug P

yeah but a silva car won again at marshalls last night hi doug!

Bring That Silva To Seaford That's the Real Test

Matt Tyson

I hope I can to marshalls before carpet is over.


Matt, do you have a new ride yet?

Doug P

anybody going to post ther detailed asphalt set-up???????

Bring That Silva To Seaford That's the Real Test

Matt Tyson




sorry i dont do asphalt hate scratches :wave:

hey doug whats up? Next sat is the last week for carpert racing at marshall try to make it out!!! Our are you going to the regionals?

Brandon Snyder

Wert: Seaford is like carpet though...anyone will tell you that. You going to come down on the 25th of June for the CW race?

Our are you going to the regionals?

Brandon Snyder

Brandon
are you gonna be at the regionals?
I will be there whooping on Ozzie, hehe

Steel City has done at to their track, its looks prime. Can't wait to get over there. Plus Ozzie is buying drinks at Hooters Saturday night for my birthday. hehe

Wert: Seaford is like carpet though...anyone will tell you that. You going to come down on the 25th of June for the CW race?



FIE- NOPE cant do sat racing i manage a car dealership sat is are big day besides im no match for the talent that will be there :wave: Have not raced outdoors for like 7 years or more! wow im getting old seams like i was just running at downingtown! :dude: :cry:

FIE- NOPE cant do sat racing i manage a car dealership sat is are big day besides im no match for the talent that will be there :wave: Have not raced outdoors for like 7 years or more! wow im getting old seams like i was just running at downingtown! :dude: :cry:


arent they allowing 3700 cells?

no eric i cant make no money or ride wish i could. HAPPY B day bud hope you have fun and kick some butt. plus i cant drink anyway i am only 17 can't even go to a strip club yet!!!

Brandon Snyder

Dave, no to 37's, just 33's. NO TALENT?? Who are you kidding!! Later, PS, pm your work # to me. I have a new phone and your number is in the last one. Beach

Eric you should try to make it to marshall some time next fall they are putting down new carpet ozite from clandra. Will be a good track to do some testing for the birds i think it is close to the same size to?

Brandon