Doug, I told those BSR's were the SHIZNET! Have a great holiday, see ya in two weeks. Beach

Your going to be at race 3, right? AND THE BSR's Rock!

yah something like a 350ft driveline. have you tried RC4LESS tires yet????

This is the Monster Dave is refering towww.racewayathobbyworld.tk bring lotsa gear . It has about 3 -5 deg banking as well and is very smooth and easy on the foam.

Its not warm enough here to run outdoors yet, can't wait to get out on the asphalt. I tried them once, they didn't work for me but I know that some guys are running good on them. I'm very happy with the BSR's, alot of compound choices, really helps dailing in the car.

gonna run mine on concrete for its first run week after next

Doug, I wont be at race #3, I will be in Chicago for work. Sucks, but works comes first, besides, that is what helps with the racing budget! LOL Later Beach

gonna run mine on concrete for its first run week after next

Donnie if you run like you did in Daytona they're in for a whoopin bad.:thumbsup:

Hey all...Blank Set-up Sheets available to download on CustomWorksRC.com. Click "Product Catalog", then "Kits" at the top and choose Aggressor.

Nice job Arnie!
NICK

here is a direct link to it. http://customworksrc.com/AggressorSetupSheet.pdf

Arnie you rock!!

Thanks

SWEET! Thank You CW!!

Thanks alot Arnie ! Your hard work and effort shows.

Arnie, thats a very nice setup page ....... I know you posted a setup for flat asphalt a couple pages back on this thread, any chance you could fill in the blanks on that setup sheet for us and post that on the CW website ?

BTW, you were very cool at the birds answering questions about the car for my buddy Ronnie .... it was appreciated that you took the time.:thumbsup:

Anybody Got Any Banked Concrete Set Ups
375 Foot Run Line Tri Oval

Anybody Got Any Banked Concrete Set Ups
375 Foot Run Line Tri Oval

Email Custom Works, Arnie might be able to help you. There should be an email link on their site.

found somewhere to get an aggressor, thanks Dave P and Rob @ Customworks

Cdog you have PM

Thanks, Dave .... i received your message..... my car is on the way :)

hrtpumper, I just took my Aggressor out yesterday up at Trax70 which is a high banked tri-oval. I think I found a setup that you might like. Shoot me an email and I'll try and help you out. Lcoopey26@comcast.net

Charlie

Anyone have these in stock?

Check with Putnam or www.kippshobbies.com

I saw one on the shelf at Platinum hobbies in colombus as well.. It was nice to race for once and know if something went wrong there was at least a kit on the shelf to get me up and running..

Anyone have these in stock?

As mentioned a few places have them in stock. I spoke to Arnie a few days ago and more kits should be available in 2 or 3 weeks, they're selling as fast as they make them, and well worth the wait.
Doug P

Anyone have these in stock?

Time for a new ride for Mikey?

If anyone needs a car kit. We have 3 kits in stock at Trax 70.:thumbsup: www.trax70.com (http://www.trax70.com) or you can call us at 1-609-735-0707

Does anyone know of anyone that has an Aggressor Kit in stock that will do mail order?

Jason Jackson

Call Tony at:
Rush & Son R/C Raceway Home of the 2005 NORRCA Paved Oval Nats
Henderson, TN 38340
Home: 731-989-4340
Cell: 731-431-0229
Fax: 731-989-0430
He had some kits last week.

Call Tony at:
Rush & Son R/C Raceway Home of the 2005 NORRCA Paved Oval Nats
Henderson, TN 38340
Home: 731-989-4340
Cell: 731-431-0229
Fax: 731-989-0430
He had some kits last week.

Thanks I will give them a call

There is nobody running this car on the WEST COAST apparently, are there any plans to change that and do some targeting out here?

We seem to be Associated/X-Factor , KSG and Hyperdrive territory by the polling I've done within my SWTour series (Which is made up of most of the west coast oval racers or at least toward the South...)

SWTour, have your local hobby shop give Custom Works a call at #704-489-8147. I am sure CW can set them up with some kits.

I can assure you, if your the first to get one in your area, everyone will be wanting one after your kicking their butts with it!! This car is the real deal for sure. Everything you need in one kit. You wont be dissapointed.

Jim Beachley

Yea! what Jim said. The car is simply awesome, I haven't qualified worse than third with it since I got mine in November.
Doug P

I second that Mr. Fastman!!
NICK

Beach,

I know at least one of the tracks/hobby shops that our series runs at had one in stock, problem is a lot of the guys out here want to know they've got support and parts, etc.

Oval on the WEST Coast is small compared to back east, we've got the travelling series that I promote/direct mostly in Southern Calif. and a handfull of tracks in NORTHERN Calif ( Up in JPH/ Maverick territory)

I have no doubt the car is KILLER, but w/o some factory support it's hard for some of the cars to get a fair shake.

...our series runs 10 races in 10 months...

We currently are using 3 FLAT tracks (Asphalt w/ FOAM tires) and a VELODROME

The flat tracks are all different sizes and grip and prove to be quite challenging. The VELODROME is strictly about SPEED!

I'm keeping my eyes out for the First AGGRESSOR on the SWTour grid...

i just wanted to take a second to let the custom works guys know that dave pulifaco and rich boehmler did a great job at focar race # 1 at TQ hobbies saturday. dave took down the pro stock class and rich b took the win in pro 19 turn..you have to be on your game to win either of those classes! nice job fellas you did custom works proud!

Thanks Katf1sh! ..... I went to the first FOCAR race of the year with my Customworks freshly built during the week, hoping it would do well in its first race. The first time I put the car on the track it was GOOD ..... and with some minor tweak adjustments it got better as the day went on. I made the A-main and took home the win first time out with the new car ..... was happy with the car all day getting the win was just icing on the cake ...... was nice to have a great handling race car that launches off the corner.

Congrats to Dave Pulifaco for winning the pro stock A-main !with his customworks ride ... good job!..... including myself, Dave, + Troy Schafer and Ronnie Hames ....... 4 of the 10 cars in the 19T Pro Mod A-main were customworks cars.:thumbsup:

Rich Boehmler

p.s. when will the shock towers be available ? ...... we need some down here in florida.

Congrats Cdog I told you would love the car. I love mine.

Who has bumpers in stock? looking for 2 of them
NICK

Some on recently told me, if you are running up front, you don't need a bumper, it might have been katfish that said that.

Some on recently told me, if you are running up front, you don't need a bumper, it might have been katfish that said that.

good thing he isn't running up front. lol

Ever here of trafic? ;0)

Congrats Dave and Rich! It really makes our day to hear people happy with our products.

Off to Halo Hobbies for the nats, hope to see some of you all there.

Todd Putnam I sent you an Email for 2 bumpers, have not herd back, please let me know as I need them for this week end. thanks
simadmin@earthlink.net
NICK

Some on recently told me, if you are running up front, you don't need a bumper, it might have been katfish that said that.

How do you think they got out front????? Maybe running two big thick ones is the key......lol

Todd Putnam I sent you an Email for 2 bumpers, have not herd back, please let me know as I need them for this week end. thanks
simadmin@earthlink.net
NICK



i think he is at the nats

Todd was at the strand this weekend said he wasn't going to the nats

Todd wanted me to post a reply about emails sent recently. This comes from Todd himself and I am not responsible for reactions.

He said to call him on the phone 518-452-0422.

And yes, he was away over the weekend at a race that wasn't the nats. He returned my call from over the weekend today after I left a message on his machine.

So, give him a call. :thumbsup:

trying mine out for the first time on caps it should be good

If anyone is interested i have a brand new aggressor for sell inthe swap and sell section, thanks!!!