The wait is almost over...and trust me, it'll be worth the wait. :thumbsup: We are now accepting back-orders for our first shipment of the Custom Works Agressor Pan Car Kits. We will be receiving a limited supply of Custom Works first initial production run, so get these pre-ordered today.
For more details, contact us...

Regards,
Todd Putnam
Putnam Propulsion
www.putnampropulsion.com
(518) 452-0422

TWO, TOO, TO, 2, :p but I guess you already know that,:thumbsup: .


Later, Bret

What is the price?

Please put me on the list. I have paypal. My e-mail addy is infinitalf@aol.com
I tried to pre-order at the website but couldn't find the form to do so. Thanx

Please put me on the list for 2 of the cars. Thanks Todd!!

Todd, what color is aluminum.?????????????

Todd,what color is aluminum.?????????????

Hopefully orange???????????

how much is the car?

YES - pictures, price and color info please :thumbsup:

The orange would go good with the new rims from RC4Less................

The orange would go good with the new rims from RC4Less................


What do they look like???

I believe the aluminum is blue.

I know the question has been asked...curious..how much they are going for....

Orange rims, Blue aluminum now those are my colors...I may have to get this car.

They are starting at $325, with a $100 deposit through Putnam Propulsion

As for the color, they are going to have the polished chrome-like IRS hubs and the aluminum pod pieces are silver, (unanodized). If anyone would like to have their cars custom anodized, I know of a place that can do it and it's not real expensive... :thumbsup:

Thanks for everyone's patience why we returned all the emails and requests. Remember to email us directly for a quicker response, as we don't get the opportunity come on the bulletin boards very often... :thumbsup:

Regards,
Todd Putnam
Putnam Propulsion
www.putnampropulsion.com
(518) 452-0422

EDIT - didn't see a second page to this topic........

Tom

What does that mean they are starting at 325. Are there going to be different versions?

Cory

The "intro" price is $325 :rolleyes:

I got it. Thanks for clearing it up.

Cory

Any pictures yet ?

look on www.customworksrc.com :thumbsup:

look on www.customworksrc.com :thumbsup:


Maybe I'm blind but I don't see anything for the Aggressor Pan Car

...They are so fast, it's tough to get a picture of them! j/k
They have been featured in ads and articles in both RC Driver and Xtreme, if I remeber correctly. I know that RC Driver did an entire article on the Aggressor that Frank Polimeda TQ'd and Won the Factory Modified Class at the last Snowbirds... :thumbsup:
I can take a picture of a prototype for anyone who hasn't seen one. Email me for a quicker response...

Regards,
Todd Putnam
Putnam Propulsion
www.putnampropulsion.com
(518) 452-0422

Log onto the website, scroll down. You'll see the car, click on it. There's only a couple pictures, but they're there. :rolleyes:

http://www.customworksrc.com/pancar.html

I saw the car at the birds & it looks killer. I would like to get ahold of one but I'll have to wait a while before I can buy one.

__________________
Brent Pearcy
Bulit Motorsports (http://www.bulitmotorsports.com/), TQCells (http://www3.sympatico.ca/tqcells/)

TODD:::: Pls take some pictures of AGGRESSOR out-of-the-box. If possible, close-up of the front-end/wheelbase adjustor/locator. As well as the rear-pod shock mounts. My e-mail address>>>www.jeepnyy@aol.com

BRENT:::: Those pictures at CW website were all proto-type on or after Snowbirds. The trailingarm/rear steer adjustment are no longer incorporated to the production cars according to Arnie. Rob Cutman should be updating those pictures with the public release of the car.

Thanx

Henry E.

The "intro" price is $325 :rolleyes:
Is that "Suggested Retail Price" ? If it is, then street price/lhs price will be a lot less. But then again, it will be priced competetively with Hyperdrive SSE Pro2 & KSG. That could be the out-of-pocket cost.....ouch !!!!!!! Another 3 hundred buccaroos. This hobby sure is not cheap. Credit card to the rescue.....LOL

The "intro" price is $325 :rolleyes:

Is that "Suggested Retail Price" ? If it is, then street price/lhs price will be a lot less. But then again, it will be priced competetively with Hyperdrive SSE Pro2 & KSG. That could be the out-of-pocket cost.....ouch !!!!!!! Another 3 hundred buccaroos. This hobby sure is not cheap. Credit card to the rescue.....LOL

What are the plans for the price after it is introduced?? Will this price rise evenmore??

Good question, all I know is that's what I'm paying. Now I'm curious to see after they hit the LHS shelves,,,,if they even make before everyone tkes them............

BRENT:::: Those pictures at CW website were all proto-type on or after Snowbirds. The trailingarm/rear steer adjustment are no longer incorporated to the production cars according to Arnie. Rob Cutman should be updating those pictures with the public release of the car.
Yeah, I knew that, but it is close to the production car & OBROCTO was looking for some pics of the car.

__________________
Brent Pearcy
Bulit Motorsports (http://www.bulitmotorsports.com/), TQCells (http://www3.sympatico.ca/tqcells/)

Yeah, I knew that, but it is close to the production car & OBROCTO was looking for some pics of the car.

I was hoping that Todd P will have a picture of the actual car out-of-the-box for us to see & drool at ....LMAO

Henry E.

I was hoping that Todd P will have a picture of the actual car out-of-the-box for us to see & drool at ....LMAO

Henry E.


Yes X2 :thumbsup:

Todd's at the offroad regionals this weekend, he wont be back till Monday, at least.Later, Bret

Henry:
I won't be able to take a picture of a production kit until we receive them. The pictures I was offering are of the same prototype-version on the CW website.
The car is very competitively priced at $325. Street price for the KSG is $315, and you get both Offset and Standard Diff Hubs with the Aggressor. :thumbsup:

Todd do you know what type of T-plate the car is going to have?

EHR: Kit includes everything you need to go racing, just bolt on tires and your radio gear and go. The kit comes with 2 .063 Fiberglass t-plates....the normal symetrical t-plate that is widely used and an offset one for running the car with the t-plate offset in the car as well. Also there will be spring steel t-plates available for both configurations.

Will try and post some pics of the new car next week when we are shooting it for the instruction book. Basically it looks close to what you have seen on the web-site or like the car I have been racing...only without the 101 Dremel hole prototype parts.

Also there is also a conversion kit available for this car, basically comes with just the parts and hardware you need to build it.

Arnie
CustomWorks

Thanks for the update Arnie, sounds good, can't wait till its released. Todd I bet you have quite a long list now of people on the first release deal you have going on.

Arnie,

I have one on order from Todd. Any basic setup ideas for a 70X24 flat track, 4 cell stock? and, more specifically, i was wondering how the offset T-plate affects the car vs. the conventional mounting position...

Thanks!
Scott Johnson

What shocks do these cars come with? Plastic center, Ass. side shocks?

What shocks do these cars come with? Plastic center, Ass. side shocks?
For the price...I would hope to see the least amount of plastics....only on neccessary parts such as the front end. Shocks should be either a HPI type or the metal-body associated type for center & sides. Iam sure, CW always comes up with quality parts for their cars.

Henry E.

Kit comes with Asc. Threaded TC center shock and VCS side shocks. The center shock mount is a graphite mount w/ various mounting locations, like the Hyperdrive aftrmarket mount. Trust me, this kit is top quality all the way... :thumbsup:

Todd, I sent you an e-mail a week ago but still haven't heard back from you. Do you still have any kits left for pre-order?

Cory

Cory,
Resend it...make sure you put CW Aggressor n the subject line... :thumbsup: Regards,
Todd Putnam
Putnam Propulsion
www.putnampropulsion.com
(518) 452-0422

Todd, send 2 kits, one built with bodies and I'll drive it. You still have my address. Dont forget tires and motors. Mayhem

I know these are just wait and see questions, since the car is not even out yet, but does anyone know if the Finishline steel spring t-plates, will fit the CW Aggressor car, if so which configuration will be needed to run the car in the offset position, also does anyone know if the servo mount holes are going to be pre-drilled and will the kit come with the wing mounts? Arnie, Todd if you guys get a chance could you please give an update, or anyone else with the inside scoop, thanks.

Arnie posted that there will be steel spring plates available, I do not know if it's an aftermarket plate or if CW has there own design.

Has anyone gotten an email from Todd in the last couple of days. We have sent him one or two to place an order and no response.

Chris
taz94@igcomputers.net

I have sent him 3 e-mails over the past 12 days and have yet to get a reply. Who knows whats going on. He replied to one I sent 3 weeks ago but that was the last time I heard anything.

Cory