r they arcor legal yet

ritchie mac

r they arcor legal yet

ritchie mac
THEY WERE ARCOR APPROVED 2/10/05

Ritchie
Martin in right, per JB:

"EPIC: 19T Modified motor, handwound armature: EPIC F-19 (Mount Fuji) Stk.# EP1154, new "Mount Fuji" endbell, with opposing circuit boards. Stand up brushes as per ARCOR specifications. Armature: Marked EPIC 19X1 on one stack. Epoxied balanced. Metalic silver can. Approved 02/10/05"

Another thing to note is they sent in 2 versions to JB to test, one was a normal round wire arm which was approved. The other version was a "flat wite" which was not approved by ARCOR. Flat wire is illegal period for ARCOR.

Thanks. erock

Where can we get one of these Fuji motors?

http://ea-motorsports.com/products/product_info.php?cPath=21_38&products_id=111&osCsid=1c55baec4b04eaaf766625617762b772

Anyone got pics?

Carpet Ass

check this thread, post #38
http://www.hobbytalk.com/bbs1/showthread.php?t=96683&page=2&pp=30

Thanks -E-.........

Spoke with JB of ARCOR tonight....She said that the motors look good and that they will be ARCOR legal as of tomorrow (me as an approved winder that is) as long as nothing bad happens!! She'll be along to post tomorrow Im sure.

Thanks
EA

Will They Be Leagal For The Open. There Is A 30 Day Rule If I'm Correct. Just Want To Make Sure.

Ritchie Mac

Will They Be Leagal For The Open. There Is A 30 Day Rule If I'm Correct. Just Want To Make Sure.

Ritchie Mac

Per email from JB 3/9/05 12:08PM:
"EA has submitted the motor as an approved winder.


The Mt Fugi and the Cobalt "9Teen" were approved for use by all ARCOR approved winders, on 02/05/05, when it was approved as sent by Trinity. The Mt. Fugi set ups are available to the winders. KC had theirs last January.


The only difference in the MT. Fuji and the "9Teen" are the endbells. The cans/arms- are/have already been approved.


The motor, therefore is legal to use at the ARCOR Open."


JB

Cool lets see if they can keep up with my big block. LOL!!!!!

Ritchie Mac

o.k.

frank p.

Hey Richie...You better have a HUGE big block if your gonna keep up with my secret weapons!! LOL

Maybe just maybe I'll see you guys next week...If not everyone have fun!!

EA

EA will you be attending the roar onroad nats.

Mike I wont be there...to much going on here.

Hope you and the family are well!!

EA

EA, you coming this weekend for the open?

Mario

eric i sent you an email.....just crickets in return? whats the beef big boy? lol

I can't seem to get to the EA sight
Can soneone repost the link
I even use the drop down in EA's name and still I get sent to Yahoo

teameamotorsports.com

Thanks Smut. Yes the new site is www.teameamotorsports.com My previous webmaster decided he wanted more money than he charged me originally and decided to cut my old site off. So its up on a new server now and should not have any more problems.

Thanks

EA

Eric I need to see about getting soem stuff from you
Please shoot me an e-mail when the best time is to call you
Thanks

Hey guys, I have been running EA's Mt Fuji based 19 turn motors. They have been running great. Check them out.

if EA puts his name on it its good !!!

Hy Donnie he has been wanting to go back down to Cliffs and race!!!!!!!!HEHE Hacksaw

Hy Donnie he has been wanting to go back down to Cliffs and race!!!!!!!!HEHE Hacksaw Well, you guys will get your chance as we are rescheduling the 500 for another weekend and will be crashing the NORRCA Part in Henderson! Blue -vs- Red -vs- what ever custom works' color is? Remember, if you can't stand the grass, stay out of the infield, lol Kellom! Oh yea, I will e-mail KSG and make sure they remind EA to bring his own car this time, lololololol

Wont have to worry about me remembering my car....It will be 4wd and it and me will be in California at the Reedy race....LOL

You all have fun running oval!! After this weekend...I know why Im ready to retire from oval for a while!! Time to beat the on road walls down!! LOL

EA

I believe the Custom Works color is Home Depot orange!?!

I ran EA's Fuji 19 turn motors and his batteries at the Carpet Oval nats this weekend, and finished 3rd. Those motors are awesome! There were also a couple of other guys in the A-main running these motors.

Thanks for the HP EA.

EA's motors will be under the hood on my car. they were fast Sat in Henderson.

How fast is your fast? :)

todd you might be a little faster if you put EA'S BIG HP IN THE TRUCK NOT UNDER THE HOOD all yall boys coming to the norrca nats better get those ea batteries and 19t motors so you can go fast EA have fun at onroad nats in cally

I too, like Brad ran the EA fuji 19turn this past weekend at the ROAR oval nats. It was ballistic. I am not sure how Brad had his set, but I ran mine with 36 degrees timming. Many people this past weekend were only running 24 degrees.

Thanks Eric A. for the monster rip.

Jamie,

I ended up with 24 degrees timing, XXX brushes, and lots of gear. I think I rolled out at 2.69 in the main.

I suggest you guys try these brushes, EA has them for sale through his web site www.teameamotorsports.com

These brushes are more expensive, but they last much longer than standard brushes, and they are very easy on the comm. I ran the same set all weekend, plus I had run them during a local race a couple of weeks ago.

todd smith i meant in the trunk those ea motors bout blew the side out of my body when i ran them what other EA motorsports people are coming to tame little talladega at norrca nats

Hey Brad and Jamie thanks for the support and representation this past weekend. Glad you guys liked the motors and the XXX brushes. Thanks to Eli Ezrow as well....I think he had a bad week but still made the show.

If you guys need anything just let me know. EA@EAMotorsports.com

how many runs are yall 19t oval guys getting out of xxx brushes #'S SHOW AWESOME AFTER SEVERAL RUNS

10-15 is what I read somewhere......

Personally I have not used the xxx brushes that I know of. I ran the Fuji motor the way it came from Eric A. It worked great. I know people say dyno #s do not mean anything but I am a guy who likes toys and to dyno race. I won this weekend. LoL 104.88 watts 1.210 torque, 2.8 spinup, 25k rpm. LoL.
It means nothing but the #s are impressive.

When I ran the main Sunday, that was probaly at least 15 runs on that set of brushes. And there are still several runs left in them. I have just been re-serrating each time the serrations are gone.

Jamie won the dyno race, and the poker game!!! Oh yeah, and he was pretty fast on the track too, just had some bad luck in the 19 turn main. I guess you used up all of your good luck on Saturday night. Good job all weekend Jamie.

sounds good my mt fuji showed about same maybe we can get up and race with yall guys sometime

ON ROAD you SISSY you know if a old man like me can get around that big track a young buck like you can do it!!!!!!If you show up I might get to MOON ye again!!!!!!!HEHE Hacksaw

Hacksaw.. If you had saw him drive Sat you would have thought he was driving onroad the way he was turning right! He must have been confused... :)
Just kidding EA.... Can't make my motorman mad!

Hey Eric.....will you ever gonna come out with an ARCOR (21-turn) Spec stock motors EA-tuned? TN State race will be at BMS as well as the Firecracker races on the 4th of July. There will be a peeps needing that extra EA hp on those 21-turners myself for sure.

Thanx

Henry E.

Hey Henry....No I wont have any type of spec motors at all except the Arcor 19 turns. For one Trinity dont OEM those motors and for two I think that sorta defeats the purpose of the class.

I wont be at BMS any..Ive hung up the oval radio for a while!!

EA

I need price on some of those XXX brushes.....you got quantity discount?

I need price on some of those XXX brushes.....you got quantity discount?

XXX Brushes are 12.95 per pair on my site. Email me for bulk pricing. Include how many you want in the email. EA@TeamEAMotorsports.com

EA

13 bucks for motor brushes, geez, I think smoking crack might be a cheaper hobby, lol Can't wait for brushless to take hold!

13 bucks for motor brushes, geez, I think smoking crack might be a cheaper hobby, lol Can't wait for brushless to take hold!

The difference here is that these brushes aren't one or two run brushes,right Eric?

Hey Cliff....At 13 bucks a pair they are bargains!! Ive got over 30 runs in one of my Arcor 19 turns with the same set....and am still running them!! Add 4383's up at every 2 runs that would be 30 bucks if you can get the brushes at 2.00 per pair. And the best of all is the XXX Brush runs better than the 4383's. Brad Hayes, Jamie Hanson and Eli Ezrow all made the A at the carpet nats using my Mt Fuji 19 turn with XXX brushes.

I think they are the best thing to come along in a long time as far as brushes!!

EA