Im here Mark, what can I do for you?



Notice: There have been a few that have said that emails were sent to me. I apparently have not got them because all emails are responded to. I must have an aol or computer problem that I havent found yet. If for some reason you dont here back from your emails, please call or fax your orders. Phone/fax712-428-4679

Thank you, Rob @ Murdock R/C & PerformanceAOL seems to be blocking a LOT of mail - and deeming it as SPAM... you are not the ONLY one with that problem, Rob.
I Just thought i'd Chime in with that little tid-bit of Computer/Internet going ons

-Tone

P.S. Rob, if you want, PM Me with your name and email address and i'll get you a GMAIL AAccount invitation... its free and its easy to use!

Rob,

Left you my cell on your VM.

Thanks,

Mark

I think I can help with your AOL mail problem. On top go to mail. On the drop down click on block unwanted mail. On the window that comes up click on allow mail from all senders and than save. If you get a lot of spam this might be a problem but less of a problem than not getting customer e-mails. AOL's defaults are set up for the average dummy. With a little digging you can get around them all. I've been on AOL since before widespread internet connectivity so I've done a lot of digging. After 12 years I'm to lazy to change. And yes I do have broadband and another account but the built in simplicity of AOL makes it more attractive than IE and Outlook.

Or maybe I'm just getting old:cry:

I noticed your comment about not receiving e-mails. FWIW, you have not responded to my e-mail of a few days ago. Perhaps if you contact me at Thunder_Road_RC@hotmail.com, we can establish communication. Waiting to hear from you; Thnks; Ernie P.

Earnest Padgette
Owner
Bruce; thanks for keeping me up to date as to what is occuring with RC4LESS. Will you be offering ARCOR Spec Tires?

Just to keep you up to date, I have purchased Thunder Road RC Speedway. Not really where I had wanted to go, but it was either buy the track, or watch it go out of business. Thunder Road (TR) will be closed, starting today, for roughly a month; to carry out some much needed cleanup and rehab. When we get going again, I'd like to set up an account with you; and carry your line of products.

I can best be reached by e-mail at "Thunder_Road_RC@hotmail.com". I'm looking forward to turning TR into a track racers will want to visit; and to working with you, to ensure I have the products they want to buy. Thanks; Ernie P. :cool:

Earnest W. Padgette
Owner,
Thunder Road RC Speedway, LLC
18079-C James Madison Hwy,
Gordonsville, VA 22947.
(540) 439-6085

Any pics yet of the pinion holders?

Pictures will be up very soon. Due to the amount of phone calls and orders the last few weeks we have just flat ran out of time to do everything. We are making getting orders out the priority.

Speaking of volume. If you have an order or question please fax or email if you can. I have hired extra staff to keep up with orders but havent had the time to be on the phone as much. If your on file then we are good to go. If your not on file or make billing changes please notify us of those changes. Include your pay pal address if you choose pay pal as your payment option. If you use a credit card, you must include the address on the card and the last 3 digits of the v code on the back in order for it to be processed

Thank you for your business, Rob @ Murdock R/C & Performance

Pictures of the KC Racing pinion racks are now up on the MURDOCK R/C & Performance web site. The pictures are located on the new page titled "R/C News Wire"

Rob I sent you an email.Craig

I got it Craig. Your pp request will be to you later today.


Rob

Thanks Rob!

Fresh load of bandit bodies just came in which included the new High Downforce Ford. $16.50 each. Headlight/grill decal sheets $1.50 each


MURDOCKRC@AOL.COM

Murdock R/C Tires put on quite a show at the Fall Oval Championship Races at the Hobby Town HobbyPLEX carpet oval in Omaha Nebraska Oct 29-31-- Murdock R/C Tires set the track record, the TQ, the win and third place in 1/10th 4 cell open mod---Murdock R/C Tires took third place ( just 1.14 seconds behind the winner) in 1/10th 19 turn 0 degree---- Murdock R/C Tires took the win in 1/10th STOCK-- Murdock R/C tires set the TQ, track record and took Second place in 1/12th 19 degree oval. Great tires, great product support and if you want a consistant shot at the win these are the tires to have on your car. Great job Rob.

did you happen to get your durometers in yet, when you do i want one!

Nothing yet on Durometers. I never know when they will show up. whatch this thread and my webpage for announcements that they are here.


I have added a new section on the website called RC NEWS WIRE. This section contains links to tracks or upcoming events as well as specials or new products that are available at Murdock R/C & Performance. When time allows I will also be puting some tips to keep you oval cars fast, tire tips and other information that may be usfull to your race program. This section will also keep you up to date on team driver performance, and how our line of tires do at those races.

ATTENTION: Due to the volume of orders, if possible please email or fax your orders. Or leave a message if we miss your call. REMEMBER: we cant call you back if you dont leave a message. So please leave a message and MURDOCK R/C & PERFORMANCE will continue to take care of your oval needs like no other

Rob @ Murdock R/C & Performance

To the top

Congradulations to team drivers Kenny Collins and Jamie Raymor on their regional victiories this past weekend with Murdock R/C Racing tires. Kenny Collins took the modified win in the region 12 and Jaymie holding the fort down in Region 3 19 turn. Keep up the great work guys and CONGRADULATIONS:)


Rob @ Murdock R/C & Performance

Murdock R/C Racing tires pull off another one. Stock oval record fell today to me on my tires (ofcourse), KC racing horses, and hyperdrive rides. We have a killer stock tire combination right now guys. Contact me for further information and details on some advantages we are seeing in the stock and 19 turn classes with this tire combo. IT IS WORKING :)


Rob @ Murdock R/C & Performance

Hey Rob just wanted to thank you for a great tire. I've been running them now for about a month and I will not run anything else. Best tire out there. If If I would have just put that dang blue on the RF on Sat I would have got the poll. Well I made the show at the Norcca Nats in 19t and Mod I guess thats all that counts. Well thanks again.

Ritchie Mac
KSG
SRC
KC Racing
PRS
Bandit
DanKim Graphics

Thanks Ritchie. I appreciate the compliments. We have tried hard to bring everyone the best possible tire we can and it seems to be working out right now. Im very happy with the performance of the rim. It seems to have everything we need in racing right now. durability, flex, and size. Congrats to you and everyone else that ran them this past weekend. I was very, very happy to see that many cars in the A mains with our tire and KC racing Power. GREAT JOB EVERYONE;)


PRODUCT HEADS UP: D&J cross braces for the ksg cars have not been available for months. Im not sure when I will see them again. I have had a ton of request for them and should have posted something long ago but was hoping they would come in. If they arrive, it will be posted here that they are back in stock.

Also: I am going to start a weekly special deal after turkey day. Ill try to spread it around to several different products at random and have something different every week. Keep an eye on this thread and the web page for those specials to be listed

ROB @ MURDOCK R/C & PERFORMANCE

Track records keep falling to Murdock R/C Tires. Brittany Murdock shatters the track record at the Omaha Nebraska HobbyPLEX oval track in 19 turn but that records falls in the next round to another car with Murdock R/C tires driven by Randy Ryder from Lincoln Nebraska. Randy takes the win in the A with Brittany 2nd.

Rob Murdock breaks his own track record with his Murdock R/C tires in the stock oval class at HobbyPLEX and goes on to take the win in the A. The second place car in the A was also running on Murdock R/C Tires. ABSOLUTELY AWESOME TIRES !!!!!

Finishline "F" Brushes are in stock and going fast. I have them for $1.75 a pair for standup or laydown for a limited time. Get your orders in now because they are burning down the door. MURDOCKRC@AOL.COM

Rob just thought you would like to know that Murdock tires finish 2nd in VA Championship Sat in 19t. I had the pole got bumped in the 3rd round by less than a sec. Thanks again man for an awsome tire.

Ritchie Mac
KSG
KCR
SRC
PRS
Bandit
DanKim Graphics

Have the max mod durometers shown up yet?

Rob, The cross braces are shipping to you this week. New machine = lots of bugs.

Cars running on Murdock R/C Tires now have the points lead in STOCK OVAL at the Hobbytown HOBBYPLEX in Omaha, Nebraska and in 19t in Stanton, Nebraska as well as the STOCK Oval, 19T and mod records in Omaha and 19T record in Stanton.

durometers should be here this week guys.

Couldnt be happier with results around the country with our tires. They are working everywhere with up front results. Great job to all drivers.

ATTENTION: Snowbird bound drivers. GET YOUR ORDER IN EARLY to ensure that you will get what you need, when you need it. Race Murdock R/C Tires or wish you had.

Rob. I have asked about and can't get an answer.How good of a Job Does the integy tire truer do Like on BSR radials. I know what from what i've read on foams,But no answer on rubber.Thanks Paul

Slider ..I do mine on my Hudy Automatic ...So I would think the Integy would work just as well from what I have seen ....

Hey Humpty. I apreciate the info.been trying to find this out for a while.I figured most don't true up there Bsr's.But I could save some money if I could do this.

Shouldnt be a problem Slider. Like I mentioned in other threads. The integy doesnt have quite the snort but even with caps were not cutting them to the bone to the point that I feel the integy will have any problems.


Rob @ Murdock R/C

Rob.Is That The Integy lathe # C-22306 and what would be best bit for cutting rubber and foams.Thanks Paul

The best bit for either foam or cap tires is the carbide cutters that I sell here. they are bullit proof and will last for a long long time. they are $29.95 and is the best thing you can buy for your tire machine.


NOTE: Integy tire machines are going to be out of stock for 8 to 12 weeks. If something changes I will let you know

Thanks Mr Rob.

can i just order a durometer and give you all the info and when they come in you could ship it?

Just got confirmation today that durometers are finally on the way. It only took forever but they are coming. Get you order in Now because they wont last long.


Rob

How much are they going for $$ I have alot of old tires that arent marked and its hard to tell what they are

Thanks racerx1

rayracer@locl.net

i want one of the durometers but have not been able to get a hold of anyone at your phone number

Rob was racing in Omaha Saturday and may have gone to another track Sunday.

Durometers are $68.99 plus shipping.

We are not in the office on Weekends if you call. But if you call during the week. It is a must that you leave a message if you want a return phone call. We are always available but have hundreds of customers a day to take care of so, if you call leave a message so your needs can be addressed.

Thank you, Rob @ Murdock R/C & Performance

Rob,Thanks for going the extra mile to help me out.Thanks again Craig

Anytime Craig. My door is always open for my friends and valued customers. After all, that is what I should do. My goal is to always be there as much as possible for everyone. ;) Thanks buddy

Rob

I have bought his carbide fine cuter for my maxmod and it does a great job.

Happy new year everyone. Murdock R/C & Performance would like to thank everyone for this past years business. We look forward to doing business with everyone for a long time to come. Thank you :thumbsup:


Dont forget to get your snow bird orders in early. Murdock R/C Tires are the fastest thing going right now and we want to make sure that everyone has what they need, when they need it. They can be purchased in singles, pairs, or performance packs. You wont get that anywhere else.


ROB @ MURDOCK R/C & PERFORMANCE

Congrats to Murdock R/C's newest driver, Ritchie Mcdonald for TQ and Win at sandhills this past weekend. Ritchie, it is a pleasure having you aboard.

Also, great job by Ben Sackett from Schaller Ia on Saturday. Myself, Bill Murdock (4th starting spot), Brittany Murdock (3rd starting spot) and Ben Sackett(2nd starting position) held the top 4 starting positions at Hobbyplex in Omaha nebraska Saturday on Murdock R/C Tires and KC Horsepower. Ben gave me a heck of a run at the start of the main. Wasnt sure if I was going to be able to keep him behind me or not. Great Job everyone

Rob @ Murdock R/C

Thanks Rob, It's my pleasure. I had a good weekend. My 19t car was good all weekend. My mod car was a hand full untill the 3rd and 4th rounds. Thanks Humpty for the arm it was HOT!!!!! Thanks again!

Ritchie Mac
KSG
KCR
Murdock R/C
Bandit
Dankim Graphics
PRS

Pinion Rack sale. these are the very nice pinion racks from KC Racing. they come in blue or red and will hold the smallest to the largest pinions. Normally $16 for the single or $39.99 for the 3 pack. Buy either and get them shipped for FREE

MURDOCKRC@AOL.COM

If you are going to be at the hobbyplex this weekend I will buy one from you.

Im at hp every week. Please contact me by phone or email and let me know what you need for sure and who I should be bringing it to as well


Thanks, Rob

Hey Rob are you at the shop this week ? I tried callin twice yesterday(mon) and had no luck so i just e mailed you an order,let me know thanks Dave Lareau

I got your email and your order is going out today. I didnt see a message come in though. We are always here but sometimes in the tire shop or on the other line. Always leave a messgae and your call will be returned

Rob