jeepnyy-Come 40 west towards nashville. Should be about 6-6.5 hours from BMS

I have been looking at the website & noticed that the in-field is dirt/grass. How do you guys handle the issue of cars ending up in that part of the track. Iam sure with concrete surface you are using cap tires with traction compound and when those tires reaches racing temp they become sticky & will attract dirt into the tires. I guess the obviuos answere is to stay in the track away from the grass !!!! lol. But sometimes, somebody bump you or there are other cars in your path. oh well. Just like they say....when in doubt...hit the quarter panel....lol Can anyone provide the exact direction...what exit ? from the exit...where to go ? to get to the track ? Thanx..

Henry E.

jeepnyy what kind of car you run?
Hyperdrive SSE Pro2 Team
KSG Solid Chassis
ADX Slider
L4

Stock/Super Spec(arcor) & or 19t limited

Hey Henry, do what I do.. http://maps.yahoo.com/dd or www.mapquest.com (http://www.mapquest.com/) You can get the tracks exact address off the first page of this thread. I could probably get ya there, but you might wind up in tinbucktoo...lol...

yeah, thats why I do both and compare the results....lol... if you can get it to get you to McAdams Rd, its exactly one mile down that road on the right.. :)

Dr Will. What you know good.Did have a great time we raced last.Ain't it time again. Yea that grass ate me a couple times.Gotta learn to stay away from that stuff.

Dr Will Look at in on the bright side yours will heal.Then you'll be heck on wheel's.Me I just get there.not fast but i will get there. How long you still gotta wear that thing?

Dr Will yea i got trapped at the wall and couldn't get off,Put me in a heck of a spot.

Dr Will I believe I woulda had a good main if it wern't for that.cause after that i was just trying way to hard to make it up.and you know the rest of the story.

Not to be prying What you do to it?

Dr Will I was meaning what you do to your ankle.

Looks like a nice track to run on. Whats the direction coming from BMS Bristol,TN ?
Thanx

Henry E.I-40 to Jackson,TN Take Hwy 45 South thru Jackson to Henderson,TN "approx 10 miles after you pass the new Lowes and Super WalMart in South Jackson, turn left onto Hwy100 4way stop go approx 5 miles to Guy McAdams Rd on the left, approx. 1 mile down to 1000 Guy McAdams Rd on the right, go down his driveway and around his shop and out to the track.

Rush & Son RC Raceway
1000 Guy McAdams Road
Henderson, TN 38340
Home: (731)989-4340
Cell: (731)431-0229

Hope this helps!!!!!!!!!!!!!!!!

Dr Will. Did you break anything or tear ligaments?

Thanx WOWRACER1. Thats seems to be what I was looking for. Now, how about some basic set-up. Front springs,center shocks spring & oil weights. Offset pods ? T-plate, fiberglass or steel(med), ride height, tweak-how much weight for the left rear? How much banking on the corners does the track have? How about gear ratio, where do you guys start on? 104/54 maybe? I will be racing stock 4 cells. Thanx

Henry E.

Jeepnyy-Start with red front springs. Medium to short front wheelbase with the right front trailing just a bit. Silver or blue side springs with 30wt. 50-60wt in center with a 5-15# spring depending on preference. Offset pod with about 2oz more on the left rear to start. 112/46+/- for stock depending on motor. Most have been running fiberglass t-plates both bias and straight cut. For your KSG run the blue washers under the front arms and number 3 rider hight adjusters in rear. Wing on pod. Green lefts and blue rights for tires.
This should get you pretty close.

hey qweer just reading all the backed up post since yall post 20 pages since i was last on

when you going to come up again?

i need to talk to brandon i need the secrets of eternal life i know he has them

can you even work with your leg like that?

sux for you

just got home from work read 80 post here gone to lake call you next weak kent will put some ice on the beer and ankle call me in the morning todd you got that man in left field on setup guess he will figure it out though hes only got every make of pancar cya when i lap you brad get the red car ready and how is freddie doing with his leg

Maybe some of you super speedway guys will help a slow fellow out so you won't have so much traffic.
He is just having to lay around with it mostly but he has got out some . Not quite ready to climb the drivers stand though.

Lap me?! :lol: :D

Where's Gilly??? He won't answer his phone.....

brad we can do some measuring and get your red car faster what tplate are you running it makes a lot of difference on the hd cars at henderson good to here freddie is still kicking roll call for this weekend who's coming

guess yall are racing the 14 my mistake just wanting to go racing bad

yeah we goin to race the 14th

kent call me tonight me and todd are going to msa seeing if you want to go call me at home 256-751-4562

brad we can do some measuring and get your red car faster what tplate are you running it makes a lot of difference on the hd cars at henderson good to here freddie is still kicking roll call for this weekend who's comingSteel

And I should be there.

brad put a 45 degree .063 or sraight cut .063 i tried steel and they just act weird at henderson hard to explain its like the t plate is trying to do all the work instead of center shock guess me and todd are going to msa in crossville since regular race week is august 14th maybe we can put the whoop on hacksaw up at msa

brad try using ksg width adjusters in front end on both sides and are you running offset pod

Straight up pod

All three screw in the back or just the outsides(t-plate)

i tried straight up on new ksg slider and went to offset and speed up 2 tenths per lap the car drives in easier and comes off 2 better offset try that t plate and offset rear pod and somewhere between 60 to 100 thoushanths stagger in tires i run all green tires but the red car may like blues on the outside overall lenght on center shock on hd should be 288 with spring compressed to around 1 inch hope this helps also side shocks 25 to 35 weight oil silver springs center #2 piston and 50 wt 20lb spring red front springs

all three screws

besides what i posted on here it is just in finding those magic tires if you can find a fast set it makes all the difference but that t plate will make car drive so much easier

can't remember which hole shock mount was in but just a little pod droop

Thanks I'll see how it does this weekend

Brad- I don't think Tony's racing this weekend. It's the 14th....

OK I forgot that it is the 14th before they run again.

brandon why didnt u send it yet???????????

btw u got aol im or yahoo im?

brad did you get email hope this helps kent said he is going to msa this weekend with me and todd so this will be interesting he finally gets to play in somebody elses back yard i wonder home many times i will hear its broke fix it this weekend got to learn somehow though i just got tired of its broke fix it an started using shoe goo

did you get it kent

kent my im is aol bptb96

Yep Brandon I got the email thanks alot.
Kent ya'll gonna be around Thurs afternoon late and into the evening

Brad I have found it.

Mitch are you going to milan on the 28 of this month

What is up on the 28 that I'm gonna miss while in Boca Raton,FL

I doubt I will Freddie, are they having a big show that weekend?