tone you going to get that temp gun for me at cruzin i need to know
Yeah, jerk..... why dont you just AIM me with this shizzzz???
OH YAH... YOU ARE ON BLOCKDOWN!!!!

-Tone

what are we racing tomorrow at Zeppelin?? Nascar or womps?? and what scale are womps??? 1/32???

i'll prolly come to watch, uless someone has a womp for me.....

-Tone

yo,
Nitrous injection for RC's....

http://www.jagrc.com/jaggas/

-Tone

Tone, where did you get your X-ray M18 pinions, I just can't seem to find them anywhere. I am using the orion ones, but the set screw is really small.

I went off my port o ramp and smacked a tree 10 feet in the air, and then the car split in half and fell to the ground, it was those 2 aluminum brace pieces. I should of got that little graphite brace piece. I ordered them both from china and hope they come before the race. Racing is its second job.

And its done for oval, but although its real fast, it still takes some skill.

what are we racing tomorrow at Zeppelin?? Nascar or womps?? and what scale are womps??? 1/32???

i'll prolly come to watch, uless someone has a womp for me.....

-Tone
Womps are the First Friday of the month on the green, hasse-8 Track. They are 1/32 scale.

Nick

I received some unassembled battery packs from Surge Batteries on Thursday to give away at the Challenge.:) Tone driving a womp,...the walls may not be safe.;) Don't worry we'll find something for ya Tone. Official entry count for the Challenge is now at 110 so don't wait till the last minute. I'll be at Zeppelins after 6:30 to take more entries.I have to see how the trophies are coming after work.Everybody bring needle nose pliers for Tone's chassis. GW

I received some unassembled battery packs from Surge Batteries on Thursday to give away at the Challenge.:) Tone driving a womp,...the walls may not be safe.;) Don't worry we'll find something for ya Tone. Official entry count for the Challenge is now at 110 so don't wait till the last minute. I'll be at Zeppelins after 6:30 to take more entries.I have to see how the trophies are coming after work.Everybody bring needle nose pliers for Tone's chassis. GWGeorge,

I probably won't make it tonight, so just run the "straight" womp and I'll get the chassis sometime before the next race.

Nick

George,

I probably won't make it tonight, so just run the "straight" womp and I'll get the chassis sometime before the next race.

Nick
Damn.... that sucks.... work is really turnin the heat on, huh? ok and as for them invites... look above in BLUE above the email.... mine moved to there!!

-Tone

Damn.... that sucks.... work is really turnin the heat on, huh? ok and as for them invites... look above in BLUE above the email.... mine moved to there!!

-Tone
Will do, thanks Tone!

Nick

Tone, where did you get your X-ray M18 pinions, I just can't seem to find them anywhere. I am using the orion ones, but the set screw is really small.

I went off my port o ramp and smacked a tree 10 feet in the air, and then the car split in half and fell to the ground, it was those 2 aluminum brace pieces. I should of got that little graphite brace piece. I ordered them both from china and hope they come before the race. Racing is its second job.

And its done for oval, but although its real fast, it still takes some skill.
i got mine from Tech Toys in Parsippany, they are a special order part... but i KNOW cruzin with R/C's has them......

yah, i was gonna get extra aluminum pieces.... i still think i might.... just gotta get some cashola for those!!!

you arent gonna race it oval anymore??/ offroad for you now???

-Tone

Gary, are you racing womps tonight? GW

Gary, are you racing womps tonight? GWGW
Missed your speech last night...

Dunno - my womp started whimpering at the thought of being on the track the same time as The Tone :p ....

I didn't do anything on my fleet this week, and I'm going to Marshalls on Sunday, so I really should stay home and wrench. Kevin's stuff is still sitting on the bench broken since we went to Barnstormers back in July. Too many toys, not enough time...

Might swing by though cause I do need some parts. I'll see.

you arent gonna race it oval anymore??/ offroad for you now???
I raced offroad the first time, and didn't do so well, so the next time I figured I'd race oval. It already won that, so I'd try my luck on the offroad. I just need some good rear tires. What I could go for is some hard spikes.

Is anyone going to the track on Saturday? I'll be there about 9:00 to breack in a new engine.

I raced offroad the first time, and didn't do so well, so the next time I figured I'd race oval. It already won that, so I'd try my luck on the offroad. I just need some good rear tires. What I could go for is some hard spikes.
damn son!! i think i might have to try offroad next year again..... i just dont wanna re-set up my car for that, now that i got oval working finally!
i'm tellin ya... get the STEP PINS from Losi!!! They work WONDERS!!!!
-Tone

Check it out, its pretty cool!

http://www.radiocontrolzone.com/forums/showthread.php?t=177728

Nick

wow its 4wd thats pritty cool

mark

Check it out, its pretty cool!

http://www.radiocontrolzone.com/forums/showthread.php?t=177728

Nick

that is cool i wonder when it will come out.

tone do have ur stock chassis from ur maxx, i think my chassis might be tweaked a little thats why i am stripping gears

tone do have ur stock chassis from ur maxx, i think my chassis might be tweaked a little thats why i am stripping gears
Check the screws that hold the tranny in. The mounts on the tranny may be stripped.

Nick

tone do have ur stock chassis from ur maxx, i think my chassis might be tweaked a little thats why i am stripping gears
nope... mine is bent too......

-Tone

Check it out, its pretty cool!

http://www.radiocontrolzone.com/forums/showthread.php?t=177728

Nick
can anyone say Tone is getting one of them bad boys!@!!!!!!

-TOne

hey does anyone know who makes a good lightweight aftermarket t-maxx chassis

Rob, i am still not sure if tony is going to take me, he said he will let me know for sure later, but if we are going to meet, we can just simply meet at the new orliens steak house at w/e time you are leaving, my email is USPatriot3k@yahoo.com, i will post later

Rob, i am still not sure if tony is going to take me, he said he will let me know for sure later, but if we are going to meet, we can just simply meet at the new orliens steak house at w/e time you are leaving, my email is USPatriot3k@yahoo.com, i will post later
Mike i cant take you!!

-Tone

Rob email me your number, and what time are you leaving(question mark)

Rob got your email, i will meet you there around 7:10

Rob i see you are on, i am leaving in a few, so i will be there for 7:10, hope you got my email, see you there

Hello Board Members,
This is Dennis and I was just wondering if anyone knows how much space the traveling war memorial takes up ? I just read in the paper they are set to do site prep work for the foundation this week including electric and water, or were exactley it is being put? It might be something to look into for the chalenge.

On a different subject anyone going to the track on Monday ? :thumbsup:

Hello Board Members,
This is Dennis and I was just wondering if anyone knows how much space the traveling war memorial takes up ? I just read in the paper they are set to do site prep work for the foundation this week including electric and water, or were exactley it is being put? It might be something to look into for the chalenge.


I heard that once they put it up we can no longer race at the track until its gone because people do not want to hear the noise

Here is the info on the wall the location for set up has been changed i checkd with JIm deyoung we're o.k. and all clear. read below
george w.


The (Vietnam) Moving Wall
September 23, 2004

The site for The Moving Vietnam Wall display in Jefferson Township scheduled for Thursday, September 23rd through Tuesday, September 28, 2004 has been changed.


After a two-year letter writing campaign and the intervention and support of local government officials, The Moving Wall, a half-size replica of the Vietnam Veterans Memorial in Washington, D.C., will be in Jefferson Township, New Jersey on display 24 hours a day beginning on Thursday, September 23rd through Tuesday, September 28, 2004 at the LAKESIDE FIELD-PARK, ROUTE 15 SOUTH, LAKE HOPATCONG, NJ (entrance driveway located between Weichert Realtors, 762 Route 15 South and Fleet Bank, 758 Route 15 South).

tone, did ya pre-register me for 2wd buggy mod when you went to zeppelins?

tone, did ya pre-register me for 2wd buggy mod when you went to zeppelins?Oh Damn!!! ask Charlie if i did!! BTW, U owe me 15 BUX (i am charging 2 bux interest) and 3 filler bottles of BLUE THUNDER! i will come collect this week... fagboy!

On other note... i BEAT CHEESE in the A-MAin....... HAHAHHAHAHAHHAHAHA

-Tone

hwo did you beat cheese?

Rob email me your number, and what time are you leaving(question mark)
Hump nuts... get a new KEYBOARD... they are 15 bux at WALMART!!! oh yah... and STOP blowing up your MOTORS!!!

-Tone

Did everybody play nice at Marshalls today?

damn cheese thats like 250 bux on electric motors this year

Did everybody play nice at Marshalls today?
Yah Charles! it was suuuuuch a blast... my t4 was PSYCHO on the offroad.... it was soooooo much fun...... and... I BEAT CHEESE! plus Chris got some GREAT pics of me flying the triple! its gonna be great!!

-Tone

tone how much do u wanat for ryans sprint car

tone how much do u wanat for ryans sprint car
IM me plese!!!

-Tone

i was just flipping by on the WWW and noticed this
http://www.teamtrinity.com/htm%20pages/sirio.21worldreplicaengine.htm

make sure to note their "Resonable Price" at the bottom.......

-Tone

Tone,

I took the ez start apart and it looked fine. I put it all together and it was working again. I think it will be fine for the challenge. I also noticed the rear tire was more wobbly than before (about to break off like chris's did) and the other rear tire was torn off the rim.

I just made some new bow tie tires and put in the close ratio two speed for the challenge. :thumbsup:

Well I am off to try and speed build my buggy :freak: .

Later

Robert

Tone,

I took the ez start apart and it looked fine. I put it all together and it was working again. I think it will be fine for the challenge. I also noticed the rear tire was more wobbly than before (about to break off like chris's did) and the other rear tire was torn off the rim.

I just made some new bow tie tires and put in the close ratio two speed for the challenge. :thumbsup:

Well I am off to try and speed build my buggy :freak: .

Later

RobertAhhhhhh cool.... well... if you need anything for an e-z start, i will bring my parts to the challenge JUST in case! Thanks for taking Cheese yesterday, *I* personally appreciate it because i wouldnt have wanted to make my bro drive him (being that he just got his license!) and like stuff...
if ya need help with anything, just give me a shout.... eviltone (at) optonline (dot) net is my email address......

good luck on that buggy.... and dont forget the loctite, cholo.....

-Tone

Official entry count on the Challenge is 122, just 28 more entries left. GW

Official entry count on the Challenge is 122, just 28 more entries left. GW
Charlie,
You think i shoulld run Sprint Car too????

-Tone

Tone, Sure why not, by the way the official entry count is now 125. gw

Tone, Sure why not, by the way the official entry count is now 125. gwok, then sprint car it is..... add that to my entries, and use the same frequency and transponder # w/ that.... i'll see you friday?

-Tone

Tone,

I took the ez start apart and it looked fine. I put it all together and it was working again. I think it will be fine for the challenge. I also noticed the rear tire was more wobbly than before (about to break off like chris's did) and the other rear tire was torn off the rim.

I just made some new bow tie tires and put in the close ratio two speed for the challenge. :thumbsup:

Well I am off to try and speed build my buggy :freak: .

Later

Robert


Rob you better make sure that starter works, dont want to doe out there and then it is tost

Rob i am working 2:30 to to something saturday so i will show up to the track early, maybe ten, so if you want i can help you with the rc10gt


-mike

Rob you better make sure that starter works, dont want to doe out there and then it is tost

Rob i am working 2:30 to to something saturday so i will show up to the track early, maybe ten, so if you want i can help you with the rc10gt


-mike


Thanks for the offer Mike, I will try to be there on sat morning as well. I will let you know how my schedule is as it gets closer.

Thanks

Robert