i am not going to get eh mf2, that spec is absolutly perfect, no complaints there




cheese all u would talk about was the mf2 now u arent getting one

the new trans is so smooth and i love running my truck all i need is my shocks cheese build them

cheese all u would talk about was the mf2 now u arent getting one

the new trans is so smooth and i love running my truck all i need is my shocks cheese build themyah, but he really seems to love his truck now..... BTW, when is cheese's birthday???
-Tone

yah, but he really seems to love his truck now..... BTW, when is cheese's birthday???
-Tone

november 29....and mine is june 8th if anyone cares

november 29....and mine is june 8th if anyone cares
June 8th Venus is going to cross the solar disk. aka partial eclipse of the sun. If you get up around sun rise you might be able to see venus infront of the sun.

June 8th Venus is going to cross the solar disk. aka partial eclipse of the sun. If you get up around sun rise you might be able to see venus infront of the sun.
Are you serious? That is so cool!

Are you serious? That is so cool!

http://www.transitofvenus.org

Are you serious? That is so cool!When were you there at the race? i didnt see you??

-Tone

When were you there at the race? i didnt see you??

-Tone
I was there at 6:30. I said Hi to you. I guess you didnt see me. Thats ok Im quiet.

Tone,

You figure out the problem with your Mini (puts pinky to mouth) -T

http://www.transitofvenus.org
Thanks Mike. Thats awesome!

Tone, did you get that post about motors for the mini. Right now it is run what ya brung. Maybe some day we will split the class but for now it is what it is. Are you going to run yours on oval this week?

Nick, good job on updating the website. I did'nt see anything for monster truck oval. Did I miss it somewhere?

The monster oval race was a blast. To bad the other trucks had problems. The more the merrier. I checked the results on the Dirtrunners website and could'nt believe that the Emaxx ran almost exact same lap times every lap. He was just so consistent. There's always next week.

The monster oval race was a blast. To bad the other trucks had problems. The more the merrier. I checked the results on the Dirtrunners website and could'nt believe that the Emaxx ran almost exact same lap times every lap. He was just so consistent. There's always next week.
Good driving job by Andrea with that EMaxx, especially with that slapper with the TMaxx weaving all over around him, trying slide jobs and all....;) ;)

I was there at 6:30. I said Hi to you. I guess you didnt see me. Thats ok Im quiet.yah, i didnt see you.. sorry :( anyways.... there's always this weekend!
-Tone

Tone,

You figure out the problem with your Mini (puts pinky to mouth) -T
not yet... i think its the diff.... i dunno if that ball diff is gonna help or hinder (prolly gonna hinder...) so i am gonna just use the stock gears again... i am gonna wait for the MIP ball Diff.. i got 3 more GPM ball diffs... any takers?
(grrrrrrr......)

-Tone

Tone, did you get that post about motors for the mini. Right now it is run what ya brung. Maybe some day we will split the class but for now it is what it is. Are you going to run yours on oval this week?
Yah, i am gonna run the oval... i might do offroad too.... but i dunno.... i beat the snot outta it on the offroad... i just need to work on the slipper adjustment.. i got the new slipper pad thing by racers edge, and it seems to work quite well... i am gonna use the BEAST motor i have... i'll proly dump with 30 seconds to go :freak: ....

StepPins Rear, gpm joints up front.... (like the proline blade..) ... i havent decided the gearing... i DO know i am replacing the CVD's cuz mine are bent to heck... i am also gonna lower the car a little (heh... watch me wipe out)... its gonna be a GREAT RACE!!! just make sure the heats are balanced.... i dunno if we want all three of us in the same heat... who else is running fast besides you and Chris?

-Tone

The monster oval race was a blast. To bad the other trucks had problems. The more the merrier. I checked the results on the Dirtrunners website and could'nt believe that the Emaxx ran almost exact same lap times every lap. He was just so consistent. There's always next week.i would run my maxx on the oval, BUT..... OFFROAD is just soooo much fun.... you saw what i was doing..... hehhehehe....

-Tone

Nick, good job on updating the website. I did'nt see anything for monster truck oval. Did I miss it somewhere?I don't know where that went off to, I'll have to fix it tonight back at my apartment


Nick

I don't know where that went off to, I'll have to fix it tonight back at my apartment


Nickwe KNOW where it went to.... Nick left it out on purpose....

-Tone

Tone, the computer puts people in the heats. I don't know if it does it randomly or by some other choice. I can manually rearrange the names but it takes a real long time so I just leave it as is. We'll have to see how it lays out this sunday.

Just a reminder to all. If anyone knows of someone to run the races at Dirtrunners let me know. It is a paying position too. In case that helps you make up your mind.

Just a reminder to all. If anyone knows of someone to run the races at Dirtrunners let me know. It is a paying position too. In case that helps you make up your mind.WHERE'S ARNOLD?!? damn... i wonder who we could find who could do a good job..... mebbe we could get Gary Thorne or Bill Clement.... or Michael Kay.... hmmmmm

-Tone

ok u were on that race but he killed u in buggy

ummm craig how about no, we all were on the lead lap

cheese all u would talk about was the mf2 now u arent getting one

the new trans is so smooth and i love running my truck all i need is my shocks cheese build them

keep calling me cheese and acting like a tough guy who knows something and i will fill the shocks with a weight oil that trinity does not make, one that my body makes

yah, but he really seems to love his truck now..... BTW, when is cheese's birthday???
-Tone

Thank you sir i have to say the truck is serving me well, (november 11) why got something special planed, hdflhadsjfhkjhfasduh.STRIPPER.hdjsakldfhklsadfhlk

poopy i didnt do what was here

Just when I though my head wouldn't be hurting from reading the board.....



Nick

We have a World Champion Slot Car Racer in out midst, Mr. Gary Kosits!


Way to go Gary! :thumbsup:

Nick

Just when I though my head wouldn't be hurting from reading the board.....


Nick
They're going at it again....

Nick, u hear about that brushless package out for the Mini-t? called MAMBA... www.castlecreations.com (http://www.castlecreations.com) apparently, the best one to get would be the 6800Kv or the 5400Kv... 140 aint a bad price.... i might just have to get it to totally smoke Wayne and Chris....

-Tone

We have a World Champion Slot Car Racer in out midst, Mr. Gary Kosits!


Way to go Gary! :thumbsup:

Nick
WHAT???? WHERE???? oh my! Congrats GARY!!!!!

-Tone

They're going at it again....

Nick, u hear about that brushless package out for the Mini-t? called MAMBA... www.castlecreations.com (http://www.castlecreations.com/) apparently, the best one to get would be the 6800Kv or the 5400Kv... 140 aint a bad price.... i might just have to get it to totally smoke Wayne and Chris....

-ToneSpend the Extra $20 cheapo! 159.95

Competition X Package
Mamba-25 and CM2080 Competition "X" Motor (8000Kv)


Nick

"With the stock gearing and a 3cell lip pack, one of out Mini-T's have been confirmed at over 60mph"

Spend the Extra $20 cheapo! 159.95

Competition X Package
Mamba-25 and CM2080 Competition "X" Motor (8000Kv)



Nick
yah, but.... WHY WOULD I WANT THAT??? you see the specs on how fast it can go on 6 cells???? (the acceleration prolly sucks tho) i am goin with the 6800 prolly, only because i want that nice mix of having a little bit of accelleration and top speed... i think i t wuoild be a WICKED thing for the oval, let alone the offroad... i'd prolly clear the triple with that!!!

-Tone

WHAT HAPPENED TO ALL MY POSTS!!! i was sooo close to 1000!! wtf???

yah, but.... WHY WOULD I WANT THAT??? you see the specs on how fast it can go on 6 cells???? (the acceleration prolly sucks tho) i am goin with the 6800 prolly, only because i want that nice mix of having a little bit of accelleration and top speed... i think i t wuoild be a WICKED thing for the oval, let alone the offroad... i'd prolly clear the triple with that!!!

-Tone
Come on....be a man :cool:

Nick

Come on....be a man :cool:

NickGrrr....:mad: DID you take your micrometer to that bushing yet, to see what kinda bearing we need for the ball diff???

-Tone

Grrr....:mad: DID you take your micrometer to that bushing yet, to see what kinda bearing we need for the ball diff???

-ToneI'm not too crazy about that ball diff, I'll have to measure it this weekend (everything is up in NJ, oops). :drunk:

Nick

If you bring it up to Zeppelin, Lou has a caliper, so he can figure out what you need


Nick

I'm not too crazy about that ball diff, I'll have to measure it this weekend (everything is up in NJ, oops). :drunk:

Nick
Yah, i am kinda pissed about it too.... considering i have 3 more.... i'm thinking it is like a 5x6..... because the stock is supposedly a 4x6.. i'll have to look again....

-Tone

If you bring it up to Zeppelin, Lou has a caliper, so he can figure out what you need


Nick
i could just go thief the one my dad has, i'm just too lazy... what i REALLY need is one of them digital ones..... that'd be sooooo nice!
-Tone

i could just go thief the one my dad has, i'm just too lazy... what i REALLY need is one of them digital ones..... that'd be sooooo nice!
-Tone
I'm still trying to figure out how they're going to work, it looks like the outdrives will fall out if the dogbones/cvd's move just a hair...I don't know how reliable it will be


Nick

Nick,
3 cell li-po is like 11volt.... (3.7x3) thats PSYCHO.... not to mention the fact that they are LIGHT AS HELL!!!! i just want a little something that i can run w/ my 6 cell joints and have decent acceleration, and stuff....

-Tone

I'm still trying to figure out how they're going to work, it looks like the outdrives will fall out if the dogbones/cvd's move just a hair...I don't know how reliable it will be


Nick
i dont know either.... it was the most messsed up 20 bux i've ever spent... (heh) maybe, just MAYBE, we can figure something out....

-Tone

Nick,
3 cell li-po is like 11volt.... (3.7x3) thats PSYCHO.... not to mention the fact that they are LIGHT AS HELL!!!! i just want a little something that i can run w/ my 6 cell joints and have decent acceleration, and stuff....

-Tone
Come on...blow the wheel off it...I want to see a mini-T explode!

Nick

Come on...blow the wheel off it...I want to see a mini-T explode!

Nick
YOU blow a wheel off....

Ball Diff By Losi....
http://www.ultimaterc.com/forums/showthread.php?s=&threadid=31221&highlight=GPM+Ball+Diff

and a thread about our ball diff....
http://www.ultimaterc.com/forums/showthread.php?s=&threadid=30794&highlight=GPM+Ball+Diff

GRRRRRRRRRRRRRRRRRRRRRRRRRRRRR.....

-Tone

Hey Nick! Shouldnt you be working!! ;) :roll:

YOU blow a wheel off....

Ball Diff By Losi....
http://www.ultimaterc.com/forums/showthread.php?s=&threadid=31221&highlight=GPM+Ball+Diff

and a thread about our ball diff....
http://www.ultimaterc.com/forums/showthread.php?s=&threadid=30794&highlight=GPM+Ball+Diff

GRRRRRRRRRRRRRRRRRRRRRRRRRRRRR.....

-ToneSeems like no one likes the GPM diff....

Nick

I'm not too crazy about that ball diff, I'll have to measure it this weekend (everything is up in NJ, oops). :drunk:

Nick

If you bring it up to Zeppelin, Lou has a caliper, so he can figure out what you need


Nick
What are you doing sending people to Zeppelins?! You know I dont want to help anyone! :tongue:

Hey Nick! Shouldnt you be working!! ;) :roll:
Yeah :D

Nick

Spend the Extra $20 cheapo! 159.95

Competition X Package
Mamba-25 and CM2080 Competition "X" Motor (8000Kv)


Nick



"With the stock gearing and a 3cell lip pack, one of out Mini-T's have been confirmed at over 60mph"
WTF. 60 MPH. wouldnt the tires blow up? that would be SICK.

What are you doing sending people to Zeppelins?! You know I dont want to help anyone! :tongue:
Thats true, you are quite mean to the customers ;) :tongue:


Nick

We have a World Champion Slot Car Racer in out midst, Mr. Gary Kosits!


Way to go Gary! :thumbsup:

Nick

WOW. GO Gary!!! Who did you pay off? Is it like one of those honorary PHDs that people get? :p