Yo mike check this out for my quad, my friend said it is a bolt on, what do you think

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7902078680&category=43977

Tone - No problems racing with you guy...I appreciate you waiting after we touched. That's the same rule Kevin and I have when we race in the same race. If one of us hacks the other making a pass, he waits til the other guy catches up. It's made us better drivers (I said better - not good!). You may want to go just a little less hot on your motor - I guarantee even though you will go slower on the straights, you will make faster laps.

And Craig - it was a pleasure racing against you in the truck B also. You drove smart and clean, you got off the gas a little more and drove the truck, and I think as a result you probably made more laps in that race than u usually do. Good job! Remember what worked for u in the race and do it again!

G

Check this out mike, if this wouldnt quench the need for speed then go buy a top fuel dragster

http://www.powroll.com/P_YAMAHA_RAPTOR.htm

Man tone what the hell is up your arse. you need a colonic or somethingnuthin... just sick of your crap....
-Tone

Tone - No problems racing with you guy...I appreciate you waiting after we touched. That's the same rule Kevin and I have when we race in the same race. If one of us hacks the other making a pass, he waits til the other guy catches up. It's made us better drivers (I said better - not good!). You may want to go just a little less hot on your motor - I guarantee even though you will go slower on the straights, you will make faster laps.

Gthats one of the options i am considering... i am runnin a 14x2 team paradigim based on the epic binary... i think i might be able to gear it a little different... right now, its 20/87, i am thinkin about doin a 19/87, or a 18/87... plus i think i need to put a little more front camber on the truck, i wasnt getting as much turning as i would have liked. i also gotta be less violent around the turns, i seem to want to fishtail the rear-end around the track.... a little finesse would definately help... i am gonna try the gearing tho @ 18/87... for sure... i might take the 15x2 out of my buggy, and use it in the truck, and put the 14x2 in the buggy (but dont quote me on that... the buggy is havin issues)

-Tone

oh yeah i forgot you didn't like the mom jokes kinda thing. Sorry craig, i don't mean it.

mike cialella, when do you want to work with me, maybe sat if your not busy

nuthin... just sick of your crap....
-Tone

AMEN!!

Rick what did the gyy say about the wolverine

Mike was my motor really bad and is the hub fixable?

130 entries???? Holy cripies!!! I hope we dont outgrow ourselves. I would have to thank Wayne and Charlie for getting everything off without a hitch. SUPERB JOB GUYS! Hey Nic, where's the results??? SLACKER...LOL. TOne, once again, good job today, seems as though yu are getting the hang of it, now just a little more throttle control, and you'll be there. Ryan...your T4 jumps perfect(maybe its just you?? J/K). What the hell is up with my T3??? It was great first race, and then...poopies??? I dont get it? Maybe time for a Losi???

FreAk
it jumps good now, after the race i moved the battery back and it made all the difference in the world

130 entries???? Holy cripies!!! I hope we dont outgrow ourselves. I would have to thank Wayne and Charlie for getting everything off without a hitch. SUPERB JOB GUYS! Hey Nic, where's the results??? SLACKER...LOL. TOne, once again, good job today, seems as though yu are getting the hang of it, now just a little more throttle control, and you'll be there. Ryan...your T4 jumps perfect(maybe its just you?? J/K). What the hell is up with my T3??? It was great first race, and then...poopies??? I dont get it? Maybe time for a Losi???

FreAk

Please Mike say it aint so you must stay with the t3 its indestructable. None of our diffs have blown in the middle of a race either like cheeses losi did.

hey tone, cheese, nipple, erk, and ryan, i drove my car with the vantage today, i set up my cyclone again, and it is so much faster than last time. I wish people ran 4wd at dirtrunners so i dont' have to make the hour trip to ny every weekend. I think i am gonna race my dads t3 or francis in novice oval next sunday (i have never ran oval before) just to get some track time.
Ricky, if your gonna run a truck why not just run it in the offroad class instead of wasting your time in novice?

.

And Craig - it was a pleasure racing against you in the truck B also. You drove smart and clean, you got off the gas a little more and drove the truck, and I think as a result you probably made more laps in that race than u usually do. Good job! Remember what worked for u in the race and do it again!

G[/QUOTE]
Craig doing something smart? nope i won't believe it.

by the way Gary, thanks soo much for lettin me borrow the crystals

Please Mike say it aint so you must stay with the t3 its indestructable. None of our diffs have blown in the middle of a race either like cheeses losi did.

Nick and I have been running Losis forever and have never had a diff blow. It just depends on how well it was built and adjusted.

The LOSI thing was a joke, u guys should know that. Im just a loyal ASSociated guy. Nuttin against Losi(being they win at our track every stinkin week). But i kinda did like Ryan's T4. Nope not gonna happen.....T3 forever(or at least until i start really loosing with it).

Tone, how long have i been telling ya to step down the motor sitiation?? Or at least back out the slipper. You are gonna be in an A-main if i gotta drag you up there every night to practice!!!!!!

Mike, i'd really have to look into that powerroll thing. Not sure but maybe a 300ex Cylinder will fit on your block?? Gotta check into that....


Later all...

FReaK

Tone, Chris and I both have the team Orion big block motor. We are both geared the same at 15/58. I really dont know why I was faster in the main considering he was faster in both heats. It amazed me, but I was ok with it. I am having a blast on the oval with it. As you can see by the entry numbers twice as many want to run Mini-T oval as offroad. That also surprises me. I ran step pins in the rear and stock rears up front and never had a problem with it all day. It did'nt matter whether the track was watered or not. Also had a blast with Maxx on the oval. I just couldnt get by the Emaxx cleanly so I kept tagging the wall. His Emaxx was pretty fast too. It was a great race day all around. Will talk more later. WAYNE

Mike you just scare everybody by that comment of going to losi.

... i do have a question.... what are the OFFROAD motor restrictions? i just wanna run the same dang motor in both classes....(thats right.. 5 classes next week)
i actually might let my bro run the tmaxx... i gotta get him up to the track this week to practice... this coming up race might be the return of the dremeled rustler... gotta talk to Numnutts.... he did pretty well in the buggy class (unlike myself)...

-Tone
Tone, the rules are as such:

Offroad Tmaxx, small block engines only (so that means no 21's, including mid-blocks, no .21 mid blocks)

Open Monster Truck, as the title suggests anything goes for engines

Tmaxx Oval, Small block motors only, no mid block .21, or .21 or larger of any type.


Nick

130 entries???? Holy cripies!!! I hope we dont outgrow ourselves. I would have to thank Wayne and Charlie for getting everything off without a hitch. SUPERB JOB GUYS! Hey Nic, where's the results??? SLACKER...LOL.
FreAk
Yeah, Yeah....I'll get there, I'll get there (Still don't have a working floppy drive in my laptop, so I was waiting till I got back to Maryland (and I jus did 5 minutes ago!)

Nick

Hey everyone! That was a great race day. Everything went so smoothly and from what I saw, everyone seemed to be running very well. Some of those tripples were awsome. I saw one and thought it was cool then everyone kept jumping it better! It was just an awesome day! I cant wait to race!

and some of those crashes were awesome!
Yeah, my Tmaxx is about 6 inches shorter after some of them....I think I got it squared away by the main though....


Nick

Craig - it was a pleasure racing against you in the truck B also. You drove smart and clean, you got off the gas a little more and drove the truck, and I think as a result you probably made more laps in that race than u usually do. Good job! Remember what worked for u in the race and do it again!

G

gary good race also to u it was very close until u and tone got in to an accident , but it was a lot of fun in that race good race

gary good race also to u it was very close until u and tone got in to an accident , but it was a lot of fun in that race good raceExcellent, Thank you

Nick

Nick and I have been running Losis forever and have never had a diff blow. It just depends on how well it was built and adjusted.
and the driver dont forget cheese was drivin and that is y

ok tone, and ryan since u said that u might go to the track erik and i were thinking of going on wednesday. erik and i are bringing are stuff to school and keeping it in his moms car so we can walk up to the track after school... ryan u have to find a ride on wednesday cheese said that he might go it tone goes, hey rick can u get a ride up there since it is wednesday and ur mom doesnt have work that day and hall if u go then we will have eryone that pits with us there that matters....(notice i didnt put down sean)

New Results are posted, enjoy!


Nick

www.DirtRunners.com (http://www.DirtRunners.com)

hey nick r we going to have point series for outdoor

hey nick r we going to have point series for outdoor
Yeah, I need to use the club laptop so I can update the first week race results, maybe I'll be able to this weekend

Nick

Does anyone know if a twister mod lathe is a good comm lathe?

Ok, thnx for the results Nic. POINT SERIES would be awesome, would make you have to finish most of the races(hint hint).

Buggy was sure a close race, i was all friggin happy, i ran two 21 second laps. Then reality hit, THAT DAMN CIALLELLA KID RAN A 20!!!!! I hate you, I HATE U!!!! LOL

The 15 turn really paid off in the main, there was more traction then than in the qualifiers.....i think...

Oh well....i guess i didnt do as bad as i thought with the truck, i ran some 23's, but the 30's killed me!!!! Always next week......OMG i just saw Craig ran a 24 with his truck!!! Keep that up and we may have another A-mainer...

Twister...not sure Erik.... See if you can locate cutters for it, if not its worthless...

FReaK

Mike i found a complete lathe for 40 where is a good place to find bits

http://rotor.com.sg/car/acc_eaglem_commulathe.htm

theres a bit says it fits twister but i have no idea

Tone, the rules are as such:

Offroad Tmaxx, small block engines only (so that means no 21's, including mid-blocks, no .21 mid blocks)

Open Monster Truck, as the title suggests anything goes for engines

Tmaxx Oval, Small block motors only, no mid block .21, or .21 or larger of any type.


Nick
no no no... it was the MINI-T motor question... goofball..
-Tone

ok tone, and ryan since u said that u might go to the track erik and i were thinking of going on wednesday. erik and i are bringing are stuff to school and keeping it in his moms car so we can walk up to the track after school... ryan u have to find a ride on wednesday cheese said that he might go it tone goes, hey rick can u get a ride up there since it is wednesday and ur mom doesnt have work that day and hall if u go then we will have eryone that pits with us there that matters....(notice i didnt put down sean)
wednesday would be good, but i wouldnt get there till like 7:30... i dont get to the mall till 6, and i gotta go home and grab my stuff...then it takes 45 min from my house.. i might be able to bring ryan, might... i dunno.. all i know is, i am missing a battery pack from my box o batts... anyone see it? its an SMC stick pack of 3300's....

-Tone

New Results are posted, enjoy!


Nick

www.DirtRunners.com (http://www.DirtRunners.com)
u need a usb floppy drive for your laptop? i got an extra.... lmk...

-Tone

wednesday would be good, but i wouldnt get there till like 7:30... i dont get to the mall till 6, and i gotta go home and grab my stuff...then it takes 45 min from my house.. i might be able to bring ryan, might... i dunno.. all i know is, i am missing a battery pack from my box o batts... anyone see it? its an SMC stick pack of 3300's....

-Tone
that would definitely be good if ya can bring me tone, i doubt that i could get my mom to take me

http://rotor.com.sg/car/acc_eaglem_commulathe.htm

theres a bit says it fits twister but i have no idea
check on ebay for a bit. get a hudy lathe. Its better to spend more now, than a little now and have to get a new one down the road.

Does anyone know if a twister mod lathe is a good comm lathe?
They are excellent lathes. Back in the day they were the Mercedes of comm lathes. I've had one since the early 90's. Very high quality.

Gary

Where do you get bits for them gary?

Mike my man, umm i am working on wed, 5:15-10 so i am free tomorrow thurs and friday, so let me know man, my friend is ordering me bearings, seals, break rotor, pads, and a throttle cable, i think that covers the damages,

Mike my man, umm i am working on wed, 5:15-10 so i am free tomorrow thurs and friday, so let me know man, my friend is ordering me bearings, seals, break rotor, pads, and a throttle cable, i think that covers the damages,why does your clutch lever feel so funny? it's like soo loose and weird.

why does your clutch lever feel so funny? it's like soo loose and weird.

well i losend the nut so it is shorter a pull, i was stiff but when i would let it out my fingers wouldnt reach it at release so thats sorta why

no no no... it was the MINI-T motor question... goofball..
-Tone
Doh!

Nick


Right now, there is only enough for 1 class, but there was going to be a big block/small block class

u need a usb floppy drive for your laptop? i got an extra.... lmk...

-Tone
Thanks Tone, but I think I'll get one from dell, its an internal drive (I should do that this week)

Nick

Where do you get bits for them gary?
You just need to determine what direction the arm turns in relation to the bit, there are only 2 types, right hand and left hand bits, all lathes I've seen use the same size bit


Nick

OK, I updated the rules page on the site. Everyone take a look and let me know if its easier to use than before.



Nick

www.DirtRunners.com (http://www.DirtRunners.com)

Ok, so I got a little bored and setup an Excel spreadsheet to track lap times and finishing positions. Figured I would share the wealth. LMK what you think and no I do not support it.

OK, I updated the rules page on the site. Everyone take a look and let me know if its easier to use than before.



Nick

www.DirtRunners.com (http://www.DirtRunners.com)
much much better, it used to take forever to scroll through everything

YO mike in truck mod i ran 4 20sec laps, i was on that race

YO mike in truck mod i ran 4 20sec laps, i was on that race

ok u were on that race but he killed u in buggy

ok wednes day is good just hope it doesnt rain now ur not bringging ur generator r u cause since u wont be there till 7:30 i might bring a 12 volt battery to charge off of


hey does anyone have an extra mod motor can i found out that my 17 turn can the magnets came loose and they were hitting the arm and i still have ryans fury can but i will give it to u on wednesday