Wanna hear some fat jokes?:wave:
Yea, like "now we know where they hid Jimmy Hoffa" lol

Dave Pull you have a PM

I sure hope the ole KSG runs good this weekend, I hate going slow! :(
Here's the gear to run at Hobby world. Look in your box where you keep your gears. Now look at your spur gears, Yep those black plastic things. Now grab several of the smallest ones and use the next to the smallest that you have. Put that one on the axle where the gears go. Dont forget the two shiny washers and those little balls.

Now look for the pinion gears. They're usually smaller than the spurs you just found and most of the time they're made of metal. Grab all the biggest ones and put about the third from the biggest on your motor.

Motor? Thats that round thing with the place to put the wires on one end and a peg sticking out of the other end. Put the pinion on the motor then put the motor in the car.

Car? That's the thing with the four tires on it. Tires? The black soft foamy things. Now do you have a charger? Hmm some are different than others but most have two sets of wires. One set goes to the power supply and the other goes to the nimh batteries. Power supply? It's a big box that hums when you plug it in to the wall, Wall? It's that flat thing that most houses have four or more of. House? Oh man this could go on for ever.

I need to race! Arrrrggghhhhh:drunk:

Cliff I only did one of those bodies for BEAR and I don't think it is him and the paint isn't flaking on it. it is just some guy having fun pushing your buttons

You guys REALLY need to do something with all this race withdrawls LOL

like what drink bear and surf the net. wait that is what I am doing now.

Here's the gear to run at Hobby world. Look in your box where you keep your gears. Now look at your spur gears, Yep those black plastic things. Now grab several of the smallest ones and use the next to the smallest that you have. Put that one on the axle where the gears go. Dont forget the two shiny washers and those little balls.

Now look for the pinion gears. They're usually smaller than the spurs you just found and most of the time they're made of metal. Grab all the biggest ones and put about the third from the biggest on your motor.

Motor? Thats that round thing with the place to put the wires on one end and a peg sticking out of the other end. Put the pinion on the motor then put the motor in the car.

Car? That's the thing with the four tires on it. Tires? The black soft foamy things. Now do you have a charger? Hmm some are different than others but most have two sets of wires. One set goes to the power supply and the other goes to the nimh batteries. Power supply? It's a big box that hums when you plug it in to the wall, Wall? It's that flat thing that most houses have four or more of. House? Oh man this could go on for ever.

I need to race! Arrrrggghhhhh:drunk:
OK got it, run a 43 pinion to a 100 spur on 2.1 inch little black spongy things.

I really hope that a Pontiac body will work for awhile. I was looking at the monte carlo I have and I did a pretty poor job of cutting a long time ago lol. So it will be a practice body and the pontiac from a long ago raffle will finally get painted......

Paint by Focker!!!!!!!!!!!! it will make you fast

hehe I can paint it I just cant cut it lol. Plus, have a new idea I want to try (probably wont work, but you never know lol)

unless you doing it for free now lol.

I really hope that a Pontiac body will work for awhile. I was looking at the monte carlo I have and I did a pretty poor job of cutting a long time ago lol. So it will be a practice body and the pontiac from a long ago raffle will finally get painted......Pontiac???? They still make those things??? lol
-George

i'll do it for free you'll just have to give me 40 bucks to pick it up muuuuhhhhhhhaaaaaaa

on my car L4 the batteries are in the same place as if you were to run a 6 cell tray all the way back and run the cells in the center position. so yah we run them mid car.After "breaking in" the track on New Years Day & working on my 19t setup,I ended up w/ batts all the way out & centered on the car.

DEI.2- Check your PM!:p

hehe I can paint it I just cant cut it lol. Plus, have a new idea I want to try (probably wont work, but you never know lol)

unless you doing it for free now lol.
Don't paint it till I cut it......

Don't paint it till I cut it...... No,I'll cut it! LOL

OK got it, run a 43 pinion to a 100 spur on 2.1 inch little black spongy things.

Try 41 pin 100 spur @ 2.1 inch little black spongy things. Maybe a 42 if you think you are Cole Trickle.

Since 2004 is over it might be a good time to start a new thread!

Since 2004 is over it might be a good time to start a new thread!
Aw man, now I gotta find a new thread? This could take weeks! :drunk:

So long Hobbyworld thread.

new thread

http://www.hobbytalk.com/bbs1/showthread.php?p=960010#post960010

Hi Im Lookin' For A Indoor Dirt Oval , Offroad ? Carpert ? In Local Area Between Jax. , Tampa . I Live In Ocala . There Is A Great Track Here But Im Disabled So Makes It Rough , Cuz Need Help With Turnmarshlin' And Pits

Hi Im Lookin' For A Indoor Dirt Oval , Offroad ? Carpert ? In Local Area Between Jax. , Tampa . I Live In Ocala . There Is A Great Track Here But Im Disabled So Makes It Rough , Cuz Need Help With Turnmarshlin' And PitsAcefl- In Jax,there's a large asphalt oval@ Hobby World. Visit the track's website at
www.racewayathobbyworld.tk (http://www.racewayathobbyworld.tk)
Also,another hobby facility with a dirt track and asphalt is under construction in Jax and should be open soon. There's also another outdoor oval & dirt track in Ormond Beach called Strickland's R/C Park,as well as a couple of outdoor tracks in Orlando. Don't know of any indoor facilities in FL.
-George

Only a 30% chance of raiin Fri.... whoott!!

Steve I still have your motor I'll bring it fri. It was storming last Fri.; so I didn't think you'd be there. Cool??

Steve I still have your motor I'll bring it fri. It was storming last Fri.; so I didn't think you'd be there. Cool??
I was there butt(tm) not for long. See ya Friday.

http://www.hobbytalk.com/bbs1/showthread.php?p=1115104#post1115104


this is the new thread