Sweet glad to see your still kickin. :dude:

No I didn't. I have to place an order for Champ. So when I do I will order some extra pre filters. I need one too.

How much are they? And if the price isnt to ugly can you order me at least 2 maybe 4. Thanks :thumbsup:

I get them from Tower for $5.00 in pack of 2

They are the Ofna ones. :thumbsup:

I get them from Tower for $5.00 in pack of 2


Go ahead and order me 2 packs :roll:

Go ahead and order me 2 packs :roll:
No problem wont be in till next week if I order them today. :thumbsup:

No problem wont be in till next week if I order them today. :thumbsup:


Thats cool thanks Nolan! :)

Hey everyone we're finally moving into the 20th century... check out GRHobbyWorld.com!! Its still only just begun but, all your parts needs can be done through the web site shortly I hope! :thumbsup:

Hey everyone we're finally moving into the 20th century... check out GRHobbyWorld.com!! Its still only just begun but, all your parts needs can be done through the web site shortly I hope! :thumbsup:
Looks Good :wave: :thumbsup:

Hey everyone we're finally moving into the 20th century... check out GRHobbyWorld.com!! Its still only just begun but, all your parts needs can be done through the web site shortly I hope! :thumbsup:


Looks good cliffy.

We gota talk cliff, I like the guys from k-zoo and all but that should be one of us in front of the banner c-mon HEHEHEHEHEHEH :jest:

I do have a pic of Chad blowing by one of the K-zoo guys but the amount of dust makes the pic look bad :freak: More pics will be taken and added to the site. the one on the home page is only temp. until we figure out what we want our logo to look like :thumbsup:

I wanna see that pic!!!!!!!!!!!!!!!!

Chad.....

You got a PM!!

I do have a pic of Chad blowing by one of the K-zoo guys but the amount of dust makes the pic look bad


SWWWWWWEEEEEEEEET I wanna see it to :thumbsup:

Nolan are you still coming out to play or are we guna stay home where its warm? What a joke july 8th and its 62 deg out :cry:

Cooter,Are you going out to woor this weekend?If the rains holds off I will be there.My home computer whent down yesterday! I think it has a cold.So we had to get the laptop out.Later Ed

I plan on going out at least there will be no bitting critters I will be there around 6:45 and I have a way to light the track an easier way so we can practice in the dark if ya want too.

Cooter,Are you going out to woor this weekend?If the rains holds off I will be there.My home computer whent down yesterday! I think it has a cold.So we had to get the laptop out.Later Ed

I am not sure yet I have that stupid roof still looming over my head so I dont know the weather looks to be not so good but I still would like to do either one or the other :mad:

I plan on going out at least there will be no bitting critters I will be there around 6:45 and I have a way to light the track an easier way so we can practice in the dark if ya want too.

Sweet I just need to dig out my long johns (heheheh) and we should be there by 5-530 see you there :thumbsup:

So cooter know anythig about computers.If so I will call ya tonight when I get home from work?(I am working now)LOL I have done everything I can think of .Ed

So cooter know anythig about computers.If so I will call ya tonight when I get home from work?(I am working now)LOL I have done everything I can think of .Ed

My wife knows her poop when it comes to computers im sure we can help ya out call me l8r :cool:

Ah just uses a big hammer that fixes everything HAHAHAHA

Here's my 2 trys......... GS

Well...i think ur right. But it might be delayed as im spending tons of money on getting my sedan stuff ready for great lakes challenge and nats. Ooops, Onroad is first on my agenda. Sorry kids.

I must say what a difference between c hub and pivot ball.Got my cva's yesterday.It feel's twitchy now.I wish i could have got out there tonight to put it through its paces but I had to be out in gr for my daughters doctors appointment.I will be there early sunday morning with the the java maker and the jug of water.Hey champ,bring out some of that special back stuff with yha!

Hey champ,bring out some of that
special back stuff with yha!
Yeah, and bring plenty of it!!!!

You all missed an awesome night of practice the track is in great shape. It was fun running under the lights :thumbsup:

Thanks for rubbin it in!

No problem :wave:

Oh Yea I would have to concur tonight was a blast im proud of the way TJ was handling the big jump like I say hes guna give the old man A run for my money soon :wave:

I will second that you might want to switch motors as fast as that thing was running

I will second that you might want to switch motors as fast as that thing was running

I know its almost scary how fast that ancient power plant is :thumbsup:

I will never make it out to pratice as I work untill 9:30p.m. :o I am glad we have are lap top or I would be out of luck ! So cooter the servo worked ?Had to of if you ran tonight.I have everything ready to go for sunday.Next sunday the 18th we are going south to laser to race going to try some tc action.

Yea the servo works great but man did I ever pretzel a front pivot ball it was so bent that it wouldnt even turn left I saved it ill show ya. But now I think I burned a bearing in the front output shaft of the center diff :mad:

You have a torson diff dont you?If I remeber wright clif had problems with his one weekend.I think he said he changed it back to the spider diff.

You have a torson diff dont you?If I remeber wright clif had problems with his one weekend.I think he said he changed it back to the spider diff.


Yes I do but I cant get one of the screws off yet to pull the diff to find out for sure but Im almost positive its the front bearing :(

Here a question for someone what is a short and long crystal for a futaba receiver I have one that says it takes short ones and that long ones wont work in it but Ive allways switched around crystals and ive never had a problem? :confused:

Here a question for someone what is a short and long crystal for a futaba receiver I have one that says it takes short ones and that long ones wont work in it but Ive allways switched around crystals and ive never had a problem? :confused:I dont know about that one cooter sorry .

I dont know about that one cooter sorry .

Yea I know, I've never heard of it I was on tower pricing out a new receiver like the one TJ has and it talked about the whole short crystal thing and I have no idea what they are saying :freak:

Hey cooter,I have a whole set of pivot balls for a pcr.If yha need on lmk.I switch to c hub so i wont be using it for as while!

Hey cooter,I have a whole set of pivot balls for a pcr.If yha need on lmk.I switch to c hub so i wont be using it for as while!


Ok I also went and bought a full set for the spare parts bin. I wonder if you can just buy the screws for them without the balls to save a little $

Hey cooter,I have a whole set of pivot balls for a pcr.If yha need on lmk.I switch to c hub so i wont be using it for as while!

If ya stay with C-Hub LMK and ill buy all your pivot balls off ya! :thumbsup:

What are the two of you doing online so early? Weird!

What are the two of you doing online so early? Weird!

Im at work totally board to drooling, so im surfin the web for something to do :thumbsup:

Im at work totally board to drooling, so im surfin the web for something to do :thumbsup:nothing to move at work.Hope I have that problem at work today.We are so far behind it sucks.

nothing to move at work.Hope I have that problem at work today.We are so far behind it sucks.


Yea this is technically our shut down time GM is shut down but we still are shiping some stuff so today we have one skid going out at noon so we get to work for about 7 min today, boy I hope I dont get hurt by all the work im doing today HEHEHEHEH :cool:

Well dont feel bad guys,I billed out about 5 hours today and probly about 30 for the whole week.That sucks not getting payed by the hour when your slow.I like those 75 hour pay checks for a 40 hour work week!

I must say what a difference between c hub and pivot ball.Got my cva's yesterday.It feel's twitchy now.I wish i could have got out there tonight to put it through its paces but I had to be out in gr for my daughters doctors appointment.I will be there early sunday morning with the the java maker and the jug of water.Hey champ,bring out some of that special back stuff with yha!
Hey Rich,
I'm just back from vacation. Was great !
Trying to catch up with all the talk you did during a week...

What do you call the back stuff ? If you were talking about the Coffee (black stuff then I suppose), then I'll bring some. FYI, it is ready to use in a coffee maker... Don't need anything else than water...

CU there on sunday guys...
Mike

Per master Swints request I'll be bringing fuel, glow plugs, clutch bearings and wheel bearings for Sun. (8x16) If anyone needs anything else send an e-mail to grhobbyworld.com by 2pm sat. I'm working on getting some kind of on-line personal order page for all woor/glrc members but it might take awhile.

Well dont feel bad guys,I billed out about 5 hours today and probly about 30 for the whole week.That sucks not getting payed by the hour when your slow.I like those 75 hour pay checks for a 40 hour work week!

I was at work for 32 hrs, paid for 40 total time actually on my hilo working about 3.5 hrs

Gotta Luv it heheheh :cool:

I was at work for 32 hrs, paid for 40 total time actually on my hilo working about 3.5 hrs

Gotta Luv it heheheh :cool:
And YOU complain about being underpaid..... right!