Hey Guys,

Finally got my computer back up and running. I will spend the next day or so responding to e-mails and then trash talkin' on some of these threads!:devil:

Just a little update on the PRS side. We are thinking of a few new gears for the possible jump to 1-cell Lipo racing. Adding a 72 tooth spur and 66-70 on pinions.

Any of you guys that test the 1-cell Lipo, let me know if more gear is needed.

Tony, do you have any suggestions on how to tighten the motor with these big pinions. I finding it difficult to do this with a 60.

Tony, do you have any suggestions on how to tighten the motor with these big pinions. I finding it difficult to do this with a 60.

I have 2 allen wrenches. One is a straight tip and the other is a ball driver. I use the ball driver to get it adjusted, then remove the pinion and use the straight tip to lock it down.

Tony we race EDM's in upstate ny and the smaller spurs will be a welcome sight , pinions would be another welcome sight

Yes it would be nice to get smaller spurs and larger pinions for gearbox cars.

What up T!!!! Whats new? shoot me an email or gimme a call one nite this week! :thumbsup:

PRS 76 tooth (or smaller) Spur Gears

WHO's got them? and/or WHEN will they be filled?

I've got guys running a VELO race the 18th looking for spurs.

Joe I have them in stock. call Dawn

Thanks Kenny,

She said there was (2), I've got them coming.

Joe if you need more let me know we also have the big pinions in stock.

It sounds like the current economy has slowed Kimbrough Products down, and he mentioned that R/C products sales are way down...and he's doing more non-rc related business these days.

The WEB SITE and any NEW Small Spur Gears have both been put on hold until something changes in the economy to make it worth spending monies that are tight.

For those of you who think KIMBROUGH is a large business, the shop is basically just JAY right now...

I'd love to see them and thier products stay alive in this hobby, but economy & competition have pushed them away


thank you PRS for adapting to the racers needs and for your great machined spurs instead of the crappy molded stuff .....

two big thumbs way up!

GAME OVER!

Just an FYI................

Barry at MSA should have the new 72 and 74 spurs tomorrow as well as 76-100.

72 is the smallest we can make with the 12 outer diff ball pattern. Anything smaller would require a totally new gear with 11 or even 10 diff ball holes.

Anyone seeing a need for pinions up to 70 tooth?

I have heard some of the Electric Dirt oval guys looking for something in the 66 to 70 range.
Hope that helps
Brooks

I can see a possible need for upto 70's on the VELO but the smaller SPUR may be enough to get there w/ the existing 65's.

I have heard some of the Electric Dirt oval guys looking for something in the 66 to 70 range.
Hope that helps
Brooks

OH MY GOSH................Brooks has spoken. How ya been there yung gass-hoppa? Still play'n in the dirt?

Yep, been playing in the dirt as of late, but didn't do much racing from March to Aug. had to remodel a house first.

Yep, been playing in the dirt as of late, but didn't do much racing from March to Aug. had to remodel a house first.

You plan on any carpet racing this year? Really good to see ya back on the boards there Brooksie!

Remember.....I still love ya my son! lol :freak:

Not sure on the carpet yet, but you would be proud I just drop $750 of the hip pocket. LOL Had to get the new HD Havok

Not sure on the carpet yet, but you would be proud I just drop $750 of the hip pocket. LOL Had to get the new HD Havok

lol lol lol......you came up off the hip huh! I know it killed ya to do it huh? lol

Well didn't hurt to bad seeing how I had a rent-a-ride for the last 1.5 years. LOL
Oh is Larry and Mike's Numbers the same at PRS?

you better get your butt to the rug........Greenville is just weeks away. Remember all the fun Jody, You and I have? Dust it off, your timming going to be off playing with all that dirt stuff.

Hope to see ya at the track.....


Deel

Hey,

The 66-70T pinions could be useful - I'd buy them the moment they were released. I just need to find another pinion caddy that can hold them (the hyperdrive caddy is great, but I don't think those sizes would quite fit). Velodrome 21.5 already needs it, and 17.5 could need it at Indy and possibly Encino.

jesus you two love birds get a room! at the birds! you will have a week to make up with each other and than get mad at each other again!

whats up brooks.....i say your name on here and you appear from thin air!

Kat, don't you know thank, I am very very sneaky! LOL

i know all about sneeky! ask rich!

Old Rich, How is he doing now?

Kat sneaky ? ...nooooooo the hell you say .......... lololol.

I'm doing good Brooks, great to see you here on hobbytalk again ........ btw, send me a pm with your current e-mail address.

Rich

Kat sneaky ? ...nooooooo the hell you say .......... lololol.

I'm doing good Brooks, great to see you here on hobbytalk again ........ btw, send me a naked pic of you with your current e-mail address.

Rich

maybe you and tony need to work some things out?:rolleyes:

ahhh Kat, your so crafty ..............:rolleyes:

hey tony your conversion is looking good on the track bro! nice job!

Bump for a great Product. PRS are the only Pinions I bought since going brushless.

When I was in need of a small spur for my TC3 in Truck Oval, PRS was the ONLY company that had what I needed. Just orderd another 5 more pinions for my TC5 in 13.5 Sedan.

hey tony your conversion is looking good on the track bro! nice job!


yes it is

What conversion? http://smileys.smileycentral.com/cat/36/36_1_3.gif (http://www.smileycentral.com/?partner=ZSzeb001_ZNxmk788NTUS)





http://www.smileycentral.com/sig.jsp?pc=ZSzeb098&pp=ZNxmk788NTUS (http://smiley.smileycentral.com/download/index.jhtml?partner=ZSzeb098_ZNxmk788NTUS&utm_id=7926)

conversion i thought he said perversion :(

hey tony your conversion is looking good on the track bro! nice job!


Been pretty quick around here, too!! :thumbsup:

Thanks go to Tony Moffre and PRS for support and great gears for the Oval Masters.


Hitman

Special Thanks to Tony Moffre and PRS for all the work involved to make the single cell Truck class at the Oval Masters

PRS still making pinion gears? :confused:
Having a little trouble finding the larger sizes.

PRS still making pinion gears? :confused:
Having a little trouble finding the larger sizes.

43-53 are out of stock but everything else is showing in stock on the website.

thanks tony for the help and the chuckles...excellant support

Big Thanks to Tony and PRS for the best gears on planet and the support to go with them!!!!

Also, special thanks to Tony on the extra "rub"..... :thumbsup:

JW Housley

i must say tony i certainly enjoyed having you run your chair into me every chance you got. I'm just kidding. Had a great weekend, look forward to doing it again.

nick

TTT

:thumbsup:

Big thanks to PRS for the top quality gears and to Tony for the awesome week to week support!!

JW Housley

Big thanks to Tony and PRS for the support and the week at the Birds. Thanks tony for all the Fine tuning in the gearing @ D'Birds

Thanks Tony for the flywheels... I meant Gears this past weekend at the Carpet Oval Nationals!!!!!!!!!!

UR THE MAN!!!!!:woohoo::woohoo::woohoo:

JW Housley

big thanks Tony!!!!!

PRS, best mesh in the business!!!

Many Thanks to Mike and Tony for your support of the Carpet Oval Nats. With out your great support I could not put on a race like this. Thanks Again.

Allan A

Tony YGM

Just to let you guys/gals know, Larry Willen on the of the PRS owners lost his dad this week. I do not have any details other than he was fighting Alzheimers (sp?). Mike and Larry started their business many years ago he had a big part in getting them boyz off their feet.

Please keep Larry and his family in your thoughts and prayers.