Thank you PRS for the smaller spur gears. Thanks for listening to the racers.

Will the smaller spurs work on a TC3/TC3 or will they need to be modified?

Thank you PRS for the smaller spur gears. Thanks for listening to the racers.

Will the smaller spurs work on a TC3/TC3 or will they need to be modified?

The 76, 80, and 84 will be in our standard line so they will fit both oval and on-road.

PRS 76, 80, and 84 spurs should be available a week from this Friday. Barry at MSA will have them a few days after that.

Anyone attending Easley the weekend of the 28th, the Hobbyshop (Hobby Connection) there will have them in stock as well (pending availability).

PRS-6476 64 Pitch 76 tooth Standard Spur
PRS-6480 64 Pitch 80 tooth Standard Spur
PRS-6484 64 Pitch 84 tooth Standard Spur

Tony Moffre
PRS Customer Service
tony@precisionraxcingsystems.com
www.prsrc.com (http://www.prsrc.com)

The 76, 80, and 84 tooth 64 pitch spurs are available on our website. Here is a link to the spurs. Look for MSA to have them mid next week.


http://www.precisionracingsystems.com/products/11

Well, we just had the first Velo race of the year. I ran a 10.5 against 19turn. Reports say b/l should be faster, but I wasn't. Only close. In the other classes I've run out there, I've always preferred as big a spur as can fit and a pinion to make the ratio. With the b/l, the best ratio I could get was using an 88t spur, which is WAY smaller than anything I ran in any other classes. I wish I could get some bigger pinions so I can move the motor farther foward with a bigger spur for more leverage.

PRS has 15 thru 60 tooth Pinions...And with a 60 you have to set your mesh tale off the pinion and then tighten up the motor ...And put your pinion back on ...

I did it all weekend, no problem.

How are we comin' on the bigger pinions?

Great Job at the Nats to Alll PRS Drivers ...I know of a Couple TQs and Wins Jody Miller TQ and Win in Stock ... Henry Green TQ in 13.5... Me 2nd In Mod Whitt Wilson TQ and Win in 4300....Mike Russell TQ and Win in 19t and 2nd in 19t with Stan Brackett.... Thanks for alll the Help Tony ...

Thanks to all who support and run PRS Racing Gears. We had an outstanding weekend with more than half of the TQ's and Wins in the Electric classes.

Again thanks for choosing PRS Racing Gears.....................

Thanks For The Gears Tony

Tony, you have an email man. :thumbsup:

Ulbrik, Stop Begging!!

Ulbrik, Stop Begging!!

We used JW's at the Nats................will be ordering one in the VERY near future.

Big Thanks to Tony and PRS for such a great Product and help at the nats!

Tony, that 80 tooth spur and the larger pinions came in handy at the nat's. Thanks for the providing the grears.

I been trying to get in touch wid PRS anyone know whats up.

Ritchie Mac

I don't think anythings up. They should be there. How have you tried to contact them and for how long?

I been trying to get in touch wid PRS anyone know whats up.

Ritchie Mac

Ritchie,

Call me when you get a chance. 704-754-6609

tq'd 17.5 at the ovalmasters with PRS gears. the 80 to 90 tooth spur gears are a must for 17.5
where was Moffre?

Big thanks to tony and PRS for the gears..won stock at the ovalmasters 2nd year in a row..2nd in 13.5 missing half the teeth on the spur in a early crash!

PRS Gears are SWEEEEEET!! Thanks Tony and PRS for the best gears on the planet!

JW

Thanks To Tony and The Guys at the Shop ... Best Gears on the Market ,,,, Jeff Humpty Helms

would anyone happen to know what diff ball size the pro lite ocal spur gears take. 1/8 or 3/32?

would anyone happen to know what diff ball size the pro lite ocal spur gears take. 1/8 or 3/32?

All of the PRS spurs take 1/8" diff balls.

alright. thanks tony

Happy NEW YEAR.................. Thanks for the gears of hard work...................

Just to let everyone know, I'll be leaving for the Birds Saturday Jan. 26th and not returning until Monday Feb. 4th. I will not be able to check e-mail but I will have my cell on so call if ya'll need something.

The hobbyshop will have gears and if and when they close Barry Hill and myself will have gears as well.

*We should have all of our product line down there so check with the hobbyshop first and then come see us.

61-65 and 76, 80, 84 spurs will be plentyfull...............




*We will be out of stock on 38 pinions. Every year we always miss one gear and the lucky one this year is 38's!

I wish all the PRS team drivers the best of luck at the birds. I'm not going to be able to make it this year. First time in 5 years that I want be in sunny Fl. New job want allow it this year. Good luck eveyone!!

Ritchie Mac
Silva Concepts
Express Motorsports
Murdock Tires
Windtunnel
PRS
Killer Koncepts

Thanks to Tony for all the help at the Birds. The only thing I can't understand is when I got back to the shop today and was catching up on orders somehow I found I had Ice-Cube's "FRIDAY" on U-Tube playing in the background while I was working.

What has Tony done to me???????????

WOOOOOOOOOOOOOO!!!!!!!!

Bt

I wanted to thank tony for the sunday SK A main 1 day sponsorhip,lol. The PRS products and motor helped put the car on the pole and the win. Thanks tony.

Tony - THANKS for letting me be part of the team!

there goes the neighborhood!

Easy there Kat! :)

Tony: I just wanted to thank you for the gears and the motorwork at the birds. There is no way I would have made the show without your help. I freed the car up waaaay too much for the main. OK, I'll say it for you: Henry Can Not Drive!

Tony,

Thanks for the gear and diff help at the birds!

your the man!

Big thanks to Tony and PRS! Made all 3 Amains and brought home the win in stock!

Jody

Thanks to Tony Moffre of Team PRS for all the Help and Suppot Building Diffs all week for my Mod Car ... Sweet Job ..
And Congrats on your Win in the Truck Class...

Big thanks to all who run and have continued to run and support PRS. Every year we grow a bit and our Team grows as well.

Thanks to Mike, Larry, and the whole PRS crew that are behind the scenes at the shop making these kick azz gears.

Thanks for your support guys..................

Right now w/o PRS and their HUGE Pinion gears...and tiny SPUR Gears Brushless racing wouldn't be what it is.

The racers need to really appreciate the fact the PRS has stayed up with this market...( MAN are these 65 tooth PINIONS Huge - coupled with the 76 tooth SPURS... we're going VELO racing SATURDAY)

PRS gears rock. Big thanks for Tony for hookin me up in the begining. Wow, I didn't realize how long ago that was. PRS has been the leading gear company since 2003!

PRS - You just can't beat the best!

-Adam Liehr
Team PRS

Big thanks to Tony and PRS, Stock win at the Roar Reg. 3 last night.

PRS the best gears on the planet.

Jon Wilson

Does PRS make any 32pitch spur gears?

Does PRS make any 32pitch spur gears?

We sure don't, sorry Scott.

We sure don't, sorry Scott.


No problem. We run them in the Nitro Pan cars and was just looking around for options.

Thanks to Tony and PRS Gears for the Help and the TQ In 17.5/Lipo this weekend @ The Roar Regional 3 race.

Hey Tony I heard you missed me.. Is that true? LOL! See you soon cat...

Ritchie Mac

Tony

You have an email:thumbsup:

Thanks Eric Knapp

Let me bump this thread back to the top with a big thanks to PRS for something customers may take for granted. I just received a large inventory order from PRS and UPS bashed in the bottom of the box such that I was worried on first inspection that some of the gears might have fallen out. When I opened the box I was pleasently reminded that PRS packed the order in a heavy duty plastic bag inside the box. If these had just been tossed loosely into a box the UPS driver would have had 40 or 50 pinions bags in the floor of the truck. Just taking the time to "double pack" the order saved the UPS driver a bitching from some old pain in the ass guy. Tony please pass along my thanks not only for a quality product but equally high quality customer service.

BT :thumbsup:

For anyone who needs to get in touch with Tony, please call him instead of email. I talked to him earlier today and his computer crashed. If you don't have his phone number, PM me and I'll get it to you.

Oh yea, thanks for the great gears!! TQ and win last night with a new track record in 21.5/lipo!