cool we should have done it back in august lol good run!

46 in 5:03, until the next race

i got to get to racing or i will be talked myself into riding bikes instead of racing

what do ya'll run for tires this time of the year in dublin

LOL, Jerry I hear ya. I keep saying we will crack 45 laps in Dublin before Summer. Donnie, are we going to 5 minutes at your track as well?

don't let that happen donnie, have to much fun racing agains you

usually Greens on the right and reds on the left with full stagger front and rear. If it's real cold a red r rear. Oh yea, some GM top engine cleaner and a hair dryer don't hurt neither..............

no we are staying at 4 for now no one wanted to run 5 here dont know why

I know one thing, I sure am ready to go to Daytona!

not even the pro stock?

i know i love it to but i am torn between the 2 right now i am gonna stick it out atleast till spring

alright, i'll be ready for a woopin come next sunday. what time do you get started

2pm i been getting whipped by Cliff here lol

Jerry brought his 47,but like he said it came to a end with the 10 sec lap,and I finished the race with 3 wheels in second in the B...:) Jerry I might need that ride now after leaving half my chassis on the track...

Willis kept the truck in the trailor today,didn't want it bashed up today..

Sorry guys can't post the results,didn't know I would have my computer fixed so soon so I didn't keep the sheets...

Geez, don't tell me the Dublin Crowd is getting even smaller

don't listen to him Jerry, edged out would be a better description, lol

na i just get tired of trying to keep our track going sometimes u know what i mean cliff gets old lol i will keep on going

yea, I know exactley what you mean, there were days when Andy , myself and Mike Burke were the only ones there. It get's kinda frustrating for sure. Speaking of Mike, he's fired up and ready for the season to open back up! talked to him 3 times today

Is Scott allowing the 4 magnet stock motors and if he is, has anyone been running them?

cliff, april man thats a long time away without a little wide open racing. think you could make it sooner

Yes Scott is allowing them,Wade,Willis,and the Carrolls have ran them...

yes he is allowing them, tried one today and was alright at the beginning of the run but died at the end. i'm sure i was running to high of a gear. i'll have to play with it awhile

We will try but we have a lot of work to do and we had the porta john picked up. Maybe we can try something in Febuary. I will be sure to let you know. We will be switching to 5 minutes in all classes for next season. So the 4 minute record will be retired and we will start off with a clean slate. Also we will not be allowing the binary stock motors next season unless the monsters become unavailable or an overwhelming amout of our local racers want it

Not that it has any bearing on my decision not to run the 4 magnet motors,Have any of the Organizations made the binary motor legal yet?

not sure

i guess they will be allowing them in daytona, has anybody heard anything about that.

Is anyone interested in running a little 19t this year?

I guess someone should ask, I will be running 19t I am pretty sure

wade, do you have the entry forms for daytona, and where are you making your resivations

are you talking about 19t in daytona, i might run both stock and 19t.

I guess I should find out if the ARCOR type 19t will be legal as well. There is just way too much crap out there these days for racers to choose from and everyone seems to be doing their own thing. Of course having 3 oval organizations doesn't help either. I have been trying to follow what ARCOR does as a guidline

I don't know about stock yet. I am already running NITRO pan car and NITRO touring

As far as where to stay, I am just going to priceline and find whatever is cheap

Jerry will stay at the same Ramada we did last year. I liked how close it was to the track didnt have to fight the traffic
Will see Mike at the Snowbirds I am sure he will have entry forms there

Congrats on your 46 laper today :thumbsup:

Will get in touch with Wendy and get the info on the motel
Date for Daytona 3/19,20,21 Will probably go down on thursday morning
Wade

alright, can't wait, let me know when you make your resavations so i can to.

we are not running the magnet at our track either i have emailed mike about daytona running then havent heard from him yet. i know that the fantom dyno has a hard time reading them right.

hey jerry shoot me a e-mail donny00@yahoo.com need to know what tires for branford this time of year

Dave @ Fantom get's his feathers ruffled when people say a motor is fooling his dyno, refer to guest messages and comments on the conference. He swears up and down that it's not happening. I have heard it both ways. Maybe if I get my hands on one I can find out for myself.........Jerry shoot me one of those e-mail's too

Tired of paying for a long distance call that is really a short distance?Check out this program I have found.It is real clear unlike other programs I have used :thumbsup: http://www.skype.com/download.html
shoot me a e-mail for my contact info kevin32024@yahoo.com

Dave @ Fantom get's his feathers ruffled when people say a motor is fooling his dyno, refer to guest messages


Cliff ,
you saw that :lol: i had to ask since a major motor builder said thats what it was doing,, i was goin to get a binary but i think i wait until see what everyone else say,,,

has anyone tried on yet,,like to know.
like you i hear they are fast ,,then you hear they make great smoke :confused:


Donnie ,,,ygm


BIGDON

Don, I won't buy one right off but I will get one to play with. We will not be allowing them @ our track until the monster is unavailable or the local racers vote it in. For right now though I beleive Dublin is doing the same thing.

Hey the stand is 99.5% completed,the roof is on to keep them hot summer rays off our heads and the sweat out of our eyes.And there was some patch work done on the bad spots..YESSSS....

A big thanks to Mr.Scott,Gary,Richard,and anyone else that helped out with the project...:thumbsup:


Driver stand picture attached, to view a larger image head over to my updated non pop up site:) www.kevinsrc.tk

HAPPY NEW YEAR EVERYONEhttp://www.handykult.de/plaudersmilies.de/partysmiley.gif

Tic Toc...9 more days! Looks like this one is gonna be a bigun. Look for 30+ in stock

just a week left, so far we have about 6 coming with us for stock

I hear there is some drivers goin to warm up those quads today at the track :cool: I might go get a few laps in myself today:p

We are goin to have a pretty good turnout,I'm guessing at least 20 for nascar stock?

Any of you guys going to run Nastruck? All you need is a truck body with the rear spoiler attached,stock motor of course...

Willis you running Nastruck this time?

I haven't been able to put my hands on a quad yet to try, maybe I will find one soon......

guys i want be able to make it down on the 11th ,,i almost forgot my wifes birthday is the 10th,, see last year on her birthday was the day i went into the hospital and was in there for 47 days,, so she kinda got robbed on her birthday, so this year i plan to make it up to her , she has been a very great wife to me when i was almost down in the count with my health and she even helps me do this hobby when i dont even work at this time ,, so iam goin to greatfully returning the favor to her this year and spend time with her that weekend,, wish i could really be there ,, but i think some of the older guys that are married and know me understands. i wish yall a great day of racing and looks to be a killer turn out. but if i dont get to make it down there before then i know i see alot of yall at daytona this year.

BIGDON

BigDon No problem :thumbsup: Wife and family should come first. Was looking forward to racing with you again. Are you running stock or 19t at Daytona??

Cliff
Scott, Gary and a few others have been working hard on the facilities, Drivers stand is finished including a roof!!, doing some painting , and grass mowing to accomadate the extra trailers
Scott had some quads the last time I was there

Gonna be a good race, tight and fast :D
Better bring your A car and plan with you :wave:

No more Quad motors left at Scott's,checked today,sold out..
There were several people there today practicing,hey Wade they did some patch work on the track also.. 47 :confused:The facility is looking great,big thanks to Gary,Scott,Chris,Richard and anyone else that has helped out :thumbsup:

Wade are you coming down to practice tomorrow?

I'm screwed, what's an "A" car? and I have no plan