cliff,
you going to have any fliers out about your season opener with direction on how to get to your track. maybe i can talk tim into a road trip up there before i have to have surgery in april. its been awhile since i have ran some caps,, like to have some fun again on them. see ya in Daytona, i have signed up for two class and debating a thrid now :lol: but four wow,, man thats alot.

BIGDON

cliff,
you going to have any fliers out about your season opener with direction on how to get to your track. maybe i can talk tim into a road trip up there before i have to have surgery in april. its been awhile since i have ran some caps,, like to have some fun again on them. see ya in Daytona, i have signed up for two class and debating a thrid now :lol: but four wow,, man thats alot.

BIGDON
Man there seems that a lot of people want to come run with us this year.

I will try to get something to gether as far as a flyer goes. This is just our first race of the year but it's turning into a big deal. See ya at the Big "D"

cliff, save me one of your 19t motors. i guess i will be running more 19t this year starting at daytona. what brush/spring combo have you been running?

I will see if I have one left. I am not sure what the springs are, they came with the motor but they seem to be like red and green. Brushes are either orion, which are not available anymore or the putnam X brush. I will have some in Daytona when you get there. The motors are by Bulit and are in a T1 can. Most are between 90 and 100 watts @ 36 deg. If I have a motor it will be the only new one left. I will e mail Bill and see if I can get a couple more before Daytona. Are you running stock and 19t?

we are going to 5 min in stock and we will keep 19t @ 4 minutes for the time being
What about 4 cell stock breakout?

7.0 breakout will be 5 minutes as well

cant wait been playing with the 19t really like this motor make you throw the stockers in the trash lol.

Donnie

cant wait been playing with the 19t really like this motor make you throw the stockers in the trash lol.

Donnie
I see you've gotten a taste of that speed so you want some of it now.

Well fellers, I am going to be off the air for the next whole week. I am headed to Savannah then on to Daytona to whip some FL tail, lol. I wish. See y'all at the races!

hey, someone turned me into an elder statesman, I'm not elderly, lol :( Although I might drive like it :thumbsup:

First race of the season is April 4th. Looks like 19t will be a big class this year!

Jerry, you got your 19t hot rod ready?

uhhhh, not sure...... going to give it a shot!!!!!
it might be ugly!!!!!!!!!

naaaa, the faster those Hyperdrives go the better they handle

i will be ready for either class.

I'm Sure You Will Donnie..... Can't Wait. It's Going To Be A Blast!!!!!!!!!!!!!

i am only gonna run one class so it depends where everyone signs up i guess. i know sammy is staying in stock for now

Donnie

I think I am going to work with the KSG for a while. I have got to find an edge somewhere

I've got to find a 19t motor .... I'ts hard to do when you don't know what your looking for. c2, handwound, ajustable timing, ti can , d5 can and so on

i am only gonna run one class so it depends where everyone signs up i guess. i know sammy is staying in stock for now

Donnie

I will get a practice in this friday. Found what was wrong with the Hyperdrive, rear ride height to low. Rookie, set-up

Jerry,

hand wound adjustable timing preferably from Bulit Motorsports. The Ti can and the D5 are very close in power. I have had better luck with the Ti, the d5 seems too run hotter for some reason. Both are good though. Here is Bill Kellum's number if you can't find any, give him a call 251-401-5354 and 251-602-9907. For brushes I like the Pro 1 from Bulit or the X brush from Putnam

Cliff,

Bill and I will probably leave early on the 3rd. Can you tell me run line and records for stock and 19t?

I'm working on reserving a set of rooms at the Comfort Inn on 247 across from the Base if any one need a room for the weekend.

Rowdy, I don't know if bill has made a reservation yet but we might take one.

Forgot to ask what kind of body downforce or speedway.

later,
Chip Bonds #94

Hey Cliff, If a bunch of us guys plan a trip to BMS to run nitro would you want to race? We need to set a date so everyone can make it.
Kevin

Rowdy, I don't know if bill has made a reservation yet but we might take one.



Forgot to ask what kind of body downforce or speedway.

later,
Chip Bonds #94


I run a HD Monte Carlo body with Green tires myself but I've only been racing oval for a little over a year.

definatly coming with the Stocker :thumbsup:

Jerry give me a call tonight or stop by for lunch on Thursday

Cliff I know what you mean about finding an edge :eek:

Wade

Been thinking about it, just talked to Wade, I'm going to stick with just running stock on the 4th. I don't have any 19t motors, and really don't know a whole lot about them. I think I will get one and aleast play around with it abit before trying to run one.

stock and 19t for me i think

Chip, The track is 305 in the runline. The track record in stock is 38 in a 4 oh something, help me out here Donnie, it's your record. In 19t you should shoot for 41 in around 4:05. Most everyone uses a downforce body here because of the shallow banking.

Kevin, that sounds like a plan. I need to get Yates back anyway, lol, if I can. I just can't do it on the 2nd or 4th weekend of the month as we will be putting on the races at home.

Did I see somewhere you were going to allow "outlaw" motors in stock? Just wanted to make sure.

David

hey david he is going to allow the bianary stock motor to run but i wouldnt worry still a lot to learn about gearing on that motor .

Donnie

Binary stock motors will be allowed but I do not want to see any of the skewed comms or arms. The entire arm must be straight up. I have heard that on short tracks the quads work wonders but as the tracks get longer the monsters are the motor of choice. Also, only ARCOR approved 19t motors will be allowed. I have some really good Bulit Monsters in stock and some pretty healthy SMC batteries as well. Also as far as I know Bulit Bill himself will be present to run 19t and answer any motor questions y'all may have. We will be getting the drivers stand finished enough to race off of this weekend but we will probably not get the top on it in time for the race on the 4th.

Cliff,
What classes will you be running on the fourth? any Nastrucks ? 4-cell stock. What time does the track open for practice? and what time do you normaly get done ( long ride home andwork at 6am ) Im thinking about coming up from Jax and need directions to the track also. Thanks :wave:
See Ya! :cool: Lee

Here are the Comfort Inn Hotel information:
(478)922-7555
Suite's are 65.69
Standard 55.00

Ask for the Echeconnee Speedway package. Hope to see everyone on the 4th.

if 3 trucks show up we will run them, the track will be open from 9am to 10 pm sat and Sun. I don't know what time we will get done Sunday but I am shooting for 6 pm.

we got the stand up today, at least where you can walk on it. We will be getting the hand rails done tomorrow.

What are the Nastruck rules? 4 cell stock?

LONG, SLEEPLESS NIGHTS until the 4th. Been waiting on this for awhile..........

Cliff looks like 3 maybe 4 nastrucks comming from Branford Can,t wait for all the action. Gary

Jerry you sure on that price for the radio and receiver?
I found the same one at tower hobbies,take a look?
Click Here (http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDNY0**&P=7url) :confused:
E-Mail me before Friday, kevin32024@yahoo.com

It sounds like we are going to have a lot of fun on the 4th. We finished nailing down the deck and putting up the handrails on the drivers stand even with a short intermission to watch the Bristol race. I would think we would run whatever rules on NASTRUCK as Scott does to be sure. Jerry you will be OK, you are the man in stock for now! :thumbsup:

Thanks,see ya the 4th :wave:

kevin, paid what I said I paid. price still on the box. I guess thay have dropped the price sents there new radio has come out. I'm not going to give it away. I'll just keep it before I do that.

Cliff, did you leave a little opening on the back...... so we can throw people off if we have to

Jerry don't forget to bring it.I need it anyways.. :thumbsup:
What time will you be at the track Saturday? So I can meet with ya and pick it up and get some laps in. Kevin

we can make arrangements for drivers stand ejection

Donnie, I wouldn't stand too close to the edge, if you know what I mean, lol

everyone watch your step around drivers stand you
might trip over a ejected driver.lol

lol no edges for me lol