Jerry you will just have to let that jar of whoopass age until April, lol.

Clifford and any of the other guys who attempted to race with us yesterday. I like most of the other racers were astounded to hear of your treatment by the people of hw. I almost drove over to the track saturday just because you guys said you were going to be there. I cant appologize for others actions but I as well as a bunch of other guys over here look forward to meeting and racing with y'all somewhere sometimes.

It's a shame I didnt get to meet you at da'birds. Wade knew where we were pitting. He visited for awhile. We(many of us) have been trying to get people from other areas to come to hw to check out the track since it had the repave but the powers that be apparently dont share the same enthusiasm we had. As in used to have. It sounds(reads)as if your whole weekend went belly up as far as racing goes. You should get the big Goody's headache award! Till the buzzer sounds. See Ya soon. I'm now thinking of racing Daytona.

Thanks David, your sentiment is appreciated. We will see y'all in Daytona and maybe you can come check us out a couple of times. www.echeconneesuperspeedway.tk :thumbsup:

Jerry, Donnie, I got to run a few laps today before the rain with the track cool and a good 19t motor, Can you say 5.6's baby? Damn that was fun, with the A10 too. You guys have to consider running this class once in a while!

i was thinking by then we will be running 5.6s in stock

The first race of the season is the first Sunday in April @ 2pm. Gates will open @ 9am unless you call ahead with an earlier arrival time. This is the track, check out the site: www.echeconneesuperspeedway.tk

Hope some of you guys come to the Gascar race this weekend at Mont. Should be a good crowd. I know of about 10 out of state guys coming.

I wish I could, but I have a pine car derby car race with my son. It was moved from last Saturday to this one coming up, bummer, I was planning on making the race :(

Hey Cliff I found a picture (http://www.kevinsrc.tk) in the tons I got and found a picture of A.T.,but it is not a close up of the car,so it is not that clear. When you get a chance to get a picture shoot it to me.Thanks,Kevin


Kevin's RC Oval Site/Branford RC Speedway (http://www.kevinsrc.tk)

will do

A.T. your picture (http://www.kevinsrc.tk) is posted. Thanks Cliff :thumbsup:

My .TK address is not working right now because of server problems. :mad:

Here is my address that is never down. :thumbsup:
http://hometown.aol.com/langcnn/myhomepage/index.html

the posts are up for the new stand. It will still be the same length, 32' and will be 5 feet high with a top. Entrance to the stand will be via a ramp down the back side. It's high time we were wheelchair accessable.

Good luck on the new drivers stand I know it will be great when you get it done. I hope we can get our ramp up in the near future. Gary.

Great hopefully in April I can make it up there and race on a new track to me and a new stand. :tongue:

Hey is there a dirt oval opening in Southern Ga.?


Kevin's RC Oval Site/Branford RC Speedway (http://www.kevinsrc.tk)

Looking good Cliff plan on making the trip up often this summer

y'all make sure you make it up for the first race of the season because we have some extra people coming from Alabama and Florida to turn a few laps. We will be running 19t as well

Cliff, What 19t Motors Are You Going To Run. Might Just Run Stock Though

We will be running the ARCOR approved 19t motor

Donnie said he will run 19t :thumbsup:

19t it is then.... cliff do you have an 19t motors for sale?

i will run just 19t on that day.

How many do you want? I have the T1 based Bulit motors. E mail me for pricing. GTOCK1000@aol.com

Keep in Mind, this is also the 1st points race. Donnie, I got an L4 you can run :freak:

Cliff are you going to 5 min races in Stock?? What about 19t ?? probably leaving it at 4min right ??
I plan on coming on the 4th

Wade, we are going to 5 min in stock and we will keep 19t @ 4 minutes for the time being. I am glad to hear you can make it. Reminder, Only ARCOR 19t motors will be allowed. The new quad magnet stock motors will be allowed also.

CLIFF Glad to here you are going to 5 min races in stock class.
my son Jeff and I will be to your race on the fourth, We will probably come over on saturday to get some practice in will let you know for sure,
Gary

yea, a few people said they are coming in on Saturday, we will make sure all is ready

We are all racing in Dublin Tomorrow, I can't wait! I can just taste a 45 lap run :thumbsup:

There will be some new records set this year.

Headed off to the "BIG D" to turn 45 laps!

well 42 laps was the best we could do, the wind really blew hard today. I hope we get one more race in Dublin before it closes :cry:

cant wait to rattle rowdy's cage lol

Yea, ole Hot Rod says he's got sumtin for ya

I hope you and Sammy run 19t on the 4th

cant wait to rattle rowdy's cage lol
Let's get it on man just happy to race again.

i am not sure about him

So you guy's are going to run 19T from now on or what. Donnie don't leave stock just yet.

dont worry i am still gonna run stock shooting for 5.8 s 5.9s this year

dont worry i am still gonna run stock shooting for 5.8 s 5.9s this year
We will see.

cliff might try and make a trip up from florida sometime this summer. i got to check with chip and see about when we can go.i love my job,but offshore work kills r/c for me. 14out 7 in. 19t 36 degree? im game. we raced with tony brothers this weekend and florida boys took a drum off whoooooooooop A$$ with us. chip bonds won. i was 4th, and tony had to b-main it in 3 of the top 4 where from p-cola.great time,hope to see you guys soon

steve brooks#22

:wave:

Steve, yea 36 deg and hang on! Look forward to seeing y'all up to race. I know some of the Bill Kellom enterage will be making the trip on the 4th of April. If you have not checked out the schedule on the website, here it is: www.echeconneesuperspeedway.tk

See y'all soon, maybe in T-Town :thumbsup:

Cliff I may try to run some 19T as well this year.

Better get yer ducks in a line then, because this ain't your fathers oldsmobile, lol

Boy Kellom sure has been quiet. I guess he's trying to figure out the counter move for Tripletts figure 4

Directions to the track from the south:

I75 exit 146 (247 connector) exit to the right travel east on 247 connector through Warner Robins until it dead ends into Hwy 247. Turn left and travel north until you pass the Krystal and cross the Echeconnee Creek. Take the next right, this is Feagin rd. Travel on Feagin to your 3rd paved right. This is Richardson dr, turn right, go to the third place on the right 2149 is the # on the box and there is a wood pickett fence out front. Bada, Bing, time to go racing! If you get lost call 478 256 2032

Directions to the track from the south:

I75 exit 146 (247 connector) exit to the right travel east on 247 connector through Warner Robins until it dead ends into Hwy 247. Turn left and travel north until you pass the Krystal and cross the Echeconnee Creek. Take the next right, this is Feagin rd. Travel on Feagin to your 3rd paved right. This is Richardson dr, turn right, go to the third place on the right 2149 is the # on the box and there is a wood pickett fence out front. Bada, Bing, time to go racing! If you get lost call 478 256 2032
Lets go racing.

Hey, is there a discount for first time racers there? J/K :)
Do you get bumped out of the breakout class after so many laps are run under the breakout point or just get that lap taken each time?

Is there a set time for practicing for the different classes on Saturday?19T,SPEC,nitro,breakout,ETC.? Or practice when you want?Hope to see you guys there. http://www.handykult.de/plaudersmilies.de/spin3.gif

Hey, is there a discount for first time racers there? J/K :)
Do you get bumped out of the breakout class after so many laps are run under the breakout point or just get that lap taken each time?

Is there a set time for practicing for the different classes on Saturday?19T,SPEC,nitro,breakout,4 cell stock,ETC.? Or practice when you want?Hope to see you guys there. http://www.handykult.de/plaudersmilies.de/spin3.gif

Cliff check out the general discussion section they are talking about power capacitors

You lose every lap quicker than 7 seconds and sometimes that can be a lot, lol

There is no controlled practice saturday or sunday.

Everybody needs to bring a clothes pin with their name on it for the frequency board. That way me not only know what frequency is being used, we know who is using that frequency as well.

Look forward to seeing everyone in Daytona. I should be there early enough this year to get a spot right next to the track, I'm getting lazy in my old age, lol. If you have never met us we will be in the BIG RED TRAILER closest to the track. Come by and say hello to Andy and myself. I might be a little preoccupied as I think I am going to run 4 classes, DOH!