so should i just bump the bec its 6.0 v now.. and will this do anything to the esc?

the mamba will handle up to 25.2volts input, what receiver/radio do you have, a spektrum receiver will take up to 9.6 volts, and futaba will handle 8.5volts, as for bec i would say run anything as the esc and receiver is the one really determaing the voltage the bec is just a storage unit for the esc incase the esc has trouble keeping up with volts needed for servos, hope that made sence! lol

the mamba will handle up to 25.2volts input, what receiver/radio do you have, a spektrum receiver will take up to 9.6 volts, and futaba will handle 8.5volts, as for bec i would say run anything as the esc and receiver is the one really determaing the voltage the bec is just a storage unit for the esc incase the esc has trouble keeping up with volts needed for servos, hope that made sence! lol

nope you completely lost me on that one LOL

nope you completely lost me on that one LOL
LMAO, ME TOO, hard to explain, a bec really is just a storge of electric/volts, incase the esc is not supplying the nessecery volts needed to operate the servos/transponder/ or anything else plugged into the receiver, when the esc is not putting out the volts needed the bec releases the extra needed , so no glitching....ect...ect is present. better??????

LMAO, ME TOO, hard to explain, a bec really is just a storge of electric/volts, incase the esc is not supplying the nessecery volts needed to operate the servos/transponder/ or anything else plugged into the receiver, when the esc is not putting out the volts needed the bec releases the extra needed , so no glitching....ect...ect is present. better??????


The BEC is not a storage device.
The BEC divides the power of a single battery pack between the motor and the radio system. This circuit offers an unchanging energy supply to the radio system's receiver while simultaneously providing the variable needs of the vehicle's motor and steering servo.
This circuit powers the servos and X amount amps of electricity can be diverted from the motor to power the servos when needed. The BEC also has logic which senses the battery voltage, and at the low end of voltage, the BEC will shut down power to the motor assuring the rx and servos with the last bits of electric power.

The BEC is not a storage device.
The BEC divides the power of a single battery pack between the motor and the radio system. This circuit offers an unchanging energy supply to the radio system's receiver while simultaneously providing the variable needs of the vehicle's motor and steering servo.
This circuit powers the servos and Rx. 3 amps of electricity can be diverted from the motor to power the servos when needed. The BEC also has logic which senses the battery voltage, and at the low end of voltage, the BEC will shut down power to the motor assuring the rx and servos with the last bits of electric power.

and how do you think it does that jbod???? it stores power, wether you copy this from a thread or artical, you said the same thing i did!!! just put a differnt way, how does the bec assure the last bits of volts to rx and servo without storeing or shutting down esc and still having volts to do this? LOL:)

and how do you think it does that jbod???? it stores power, wether you copy this from a thread or artical, you said the same thing i did!!! just put a differnt way, how does the bec assure the last bits of volts to rx and servo without storeing or shutting down esc and still having volts to do this? LOL:)

The BEC also has logic which senses the battery voltage, and at the low end of voltage, the BEC will shut down power to the motor assuring the rx and servos with the last bits of electric power.

The BEC also has logic which senses the battery voltage, and at the low end of voltage, the BEC will shut down power to the motor assuring the rx and servos with the last bits of electric power.

if it shuts down power to esc witch the volts go through to get to the bec, how does the bec still operate and do it job without having the power to do so?

I can't type that fast, so I just googled BEC RC and copy paste and ther it was.lol.

if it shuts down power to esc witch the volts go through to get to the bec, how does the bec still operate and do it job without having the power to do so?

that quote said cuts power to motor not esc. I would assume that it is talking about a internal bec.

I can't type that fast, so I just googled BEC RC and copy paste and ther it was.lol.

lol, it does store volts, hence to do the job it has been meant to do, i unterstand what your saying but cant do it without stored power. otherwise defeats the hole purpose of having a BEC:tongue:

that quote said cuts power to motor not esc. I would assume that it is talking about a internal bec.

i dont even know why im talking about this ELECTRIC SUCKS!!!!! LMAO!!!!!

lol, it does store volts, hence to do the job it has been meant to do, i unterstand what your saying but cant do it without stored power. otherwise defeats the hole purpose of having a BEC:tongue:

how does a circuit store power?
BEC= battery eliminating circuit.
not BEC= just in case power or "reserve power"
:jest::jest::jest::jest::jest::jest::jest:

i dont even know why im talking about this ELECTRIC SUCKS!!!!! LMAO!!!!!

:jest::jest::jest::beatdeadhorse::beatdeadhorse:

how does a circuit store power?
BEC= battery eliminating circuit.
not BEC= just in case power or "reserve power"
:jest::jest::jest::jest::jest::jest::jest:

it stores and allows a certian amount of volts to and certain object that needs it.....dont know how to explain, just put a new glow plug in it...lol, this explains it.... http://www.wattflyer.com/forums/archive/index.php/t-2809.html

its kinda like my power supply for my charger, i can unplug it and the light will stay on for 30 seconds after, means it still has power even though i unplugged it!

and how do you think it does that jbod???? it stores power, wether you copy this from a thread or artical, you said the same thing i did!!! just put a differnt way, how does the bec assure the last bits of volts to rx and servo without storeing or shutting down esc and still having volts to do this? LOL:)
if you use a power cap like the tekin one that will help solve a servo power problem ...ie buy one and wire it to a plug and run it in an open port on the receiver . should work just fine thats what i had to do to my jammin ofna scrt10 4x4:thumbsup:

if you use a power cap like the tekin one that will help solve a servo power problem ...ie buy one and wire it to a plug and run it in an open port on the receiver . should work just fine thats what i had to do to my jammin ofna scrt10 4x4:thumbsup:spektrum makes one that plugs into the open port on the reciever.

Inferno I see one of your posts are gone on another thread. Whats up with that?

Inferno I see one of your posts are gone on another thread. Whats up with that?

??? what thread?

i found it, LOL, seems like some mods just delete things they dont like, i wasent breaking any rules or anything, maybe i should report it...lol

Hey Tipp, did you see the prayer I came up with for you?
I did see it, I feel honored, I did'nt know it was for me....LOl!

I could use some prayer, I'm not sure that counts though!:freak:

I did see it, I feel honored, I did'nt know it was for me....LOl!

I could use some prayer, I'm not sure that counts though!:freak:

You two need to get a room! LOL.

You two need to get a room! LOL.
Actually we already have, a room together for the Big K, but oh yea, I'm sorry, I remember now that you can't go, because your wife runs your life......poor whipped boy.....LMAO!

Actually we already have, a room together for the Big K, but oh yea, I'm sorry, I remember now that you can't go, because your wife runs your life......poor whipped boy.....LMAO!

OUCH!!!!!!!!!!!!:cry::cry::cry::cry:

jbod, if it's money you need, no worries, I'll loan you how ever much you need just 25% interest compounded daily.

Now can you go?

jbod, if it's money you need, no worries, I'll loan you how ever much you need just 25% interest compounded daily.

Now can you go?

No!!!!!

Ok then, I'll let you alone. I've got to go down and re-solder my esc, the jackwads did'nt send me the same esc back and I had all my leads color coded and cut and soldered to exact length. More freakin work, and I don't like soldering. There, I got that off my chest.

Ok then, I'll let you alone. I've got to go down and re-solder my esc, the jackwads did'nt send me the same esc back and I had all my leads color coded and cut and soldered to exact length. More freakin work, and I don't like soldering. There, I got that off my chest.

At least you got one back.

jbod, if it's money you need, no worries, I'll loan you how ever much you need just 25% interest compounded daily.

Now can you go?

That might still be cheaper than your local check and go.. or what ever those highway robbers are called. LOL

Ok had to steal that from some guys web page because he copy protected it... dumba**

Ok then, I'll let you alone. I've got to go down and re-solder my esc, the jackwads did'nt send me the same esc back and I had all my leads color coded and cut and soldered to exact length. More freakin work, and I don't like soldering. There, I got that off my chest


http://i2.photobucket.com/albums/y26/manatarms25/2946033668_25dcb1be52_o.jpg

Nice JJ, later I'll tell you the rest of the story.......

anybody ever use the 9100t jr servos? i just bought 2 of them and wondered if i need to use a regulator with a 7.4v receiver pack.

Is anybody else watching the state of the bull crap address?

Is anybody else watching the state of the bull crap address?

heck no, waste of time:)

Grave digger on speed right now, Monster Jam, go digger!!!!!!!! Dennis Anderson for president......

thats what im watchin!!

going back and forth between the two, crushed economy and crushed cars, very similar if you think about it.....LOl!

Obama thinks we have the greatest nation on earth, easily said buy the man running it all. I think Castro said the same thing 30 years ago about another nation........

Obama thinks we have the greatest nation on earth, easily said buy the man running it all. I think Castro said the same thing 30 years ago about another nation........

so did Hitler , napoleon , and any other that run their country in the ground .
I'm just saying ....

what a waste of time watching obama last night......our state or the state speech was better then that!!

Thats because our new govenor actually knows what he is talking about, unlike puppet boy in the white house

Tip you gonna get the new losi 4x4 sc truck

Tip you gonna get the new losi 4x4 sc truck
No wigman, I've got all the rc's I need for right now, don't have time to race them all as it is......LOL! But, who knows about tomorrow!

Tip you gonna get the new losi 4x4 sc truck

Tipp, needs to buy a HPI BAJA SCT 1/5 truck:thumbsup:

I ran across this info from last year.

Track records for NMRCC 2010:
NOVICE - CASEY BRAKE JR. - 7/5:28.30
M/T - MIKE ROE - 15/10:22.90
13.5 STADIUM - RON JACKSON - 12/7:14.92
TRUGGY - RON JACKSON - 24/15:02.06
STOCK SC - CHRIS CAIRNS - 11/7:36.15
MOD SC - CASEY BRAKE - 10/7:05.07
4WD SC - FRAN HANSON - 12/7:15.24
1/8 BUGGY - MIKE ROE - 10/7:06.92

Congratulations to all of our 2010 track record holders, but lets not sit back on our laurels, let's tear it up this year, I want to see all new track records set in 2011 and with some new names.

Revo-lution, did you get that chew toy from your dogs yet?

Here Tipp this might get you thinking.
http://www.hpiracing.com/videoplayer/78/

Yep, gets me thinking!!!!!



About spring season at NMRCC..................

Yep, gets me thinking!!!!!



About spring season at NMRCC..................

So Tipper are you guys looking at changing the layout for next year, or maybe tweaking some ?