It's a good thing Randy lives a little out of town, cause there wont be a many neighbors to complain about the 5 square mile brownout that happens when we throw the switch!!! Lol

Midnight, hell, I parked my linetruck a little after 4:00 am! Haven't been to sleep yet!

I wound down and went to bed around 2am, could'nt get those new lights out of my mind. Did I mention how awesome those lights are? Just saying....LOL!

so i can take out the headlights i installed in the truggy?...LOL

jbod, you want that clutch setup before next race or you want me to just bring with?

Just bring it with you please. Thanks.

Jbod, did hpi get you squared away or what?

Jbod, did hpi get you squared away or what?

Not yet.

Not yet.

Ill bet all your nitros run.....hehehe:)

Ill bet all your nitros run.....hehehe:)

Yep! :thumbsup::thumbsup:

Yep! :thumbsup::thumbsup:

:):):):thumbsup::thumbsup:

sonny should bring his big heli out saturday! that thing was awsome and fun to watch!!

We should get GNS to talk to Cris at CD hobbies and have all them guys bring their cars and heli's.

Are you kidding me? Man, I'd be calling them every damn day, and harassing them in a mildy polite, yet irritating way! Until They just send you new shit so you don't have to listen to you anymore!!! Hell yeah, that would be fun! In fact, give me the info, and I'll do it for you! Seriously. I bet I can get you a brand new motor/esc in time for the night race Saturday!

Are you kidding me? Man, I'd be calling them every damn day, and harassing them in a mildy polite, yet irritating way! Until They just send you new shit so you don't have to listen to you anymore!!! Hell yeah, that would be fun! In fact, give me the info, and I'll do it for you! Seriously. I bet I can get you a brand new motor/esc in time for the night race Saturday!

I've been calling every day! Since they received it on the 10th. I'm told every time that it is in the shop and they will call when it's done. Irritating don't seem to bother them.

ready to make those banners........targets now......LOL

went to performance and picked up a few pinions, WOW, just...WOW!!

went to performance and picked up a few pinions, WOW, just...WOW!!

Sooooooo, I take it you thought "wow, just wow"?

Sooooooo, I take it you thought "wow, just wow"?

YEP!:thumbsup:

got part of the 71 chevy painted:thumbsup:

got part of the 71 chevy painted:thumbsup:

Lookin good!!:thumbsup:

got part of the 71 chevy painted:thumbsup:

What size servo's do you run in that?

TY cal me please

Nice lookin ride GNS. It's been a lot of work, I bet your looking forward to rolling that baby out for a cruise.

What class you planning on running that in? Lol!

What size servo's do you run in that?

thats going to be my R/C Hauler.

Nice lookin ride GNS. It's been a lot of work, I bet your looking forward to rolling that baby out for a cruise.

sure am............but wont be done untill next summer

sure am............but wont be done untill next summer
Don't forget to pick me up for BL cruise !!!!!!!!!!!!!!!!

Inferno, you gonna be there Saturday?





















Thought you might have a horse show or something else important to do.....LOL!

GNS, becky wanted me to remind you about the cookies.

Inferno, you gonna be there Saturday?





















Thought you might have a horse show or something else important to do.....LOL!

it wasent a horse show! LOL, went camping. ill be there.
i cant beleive how fast this sc8 is! we should have drag races. haveing to turn right and left screws me all up...LOL

Will any of these work good at NMRCC for 1/8
Proline Inside Job M3
Proline Holeshot M3
Losi Digits Green
Losi Block Head Green

Will any of these work good at NMRCC for 1/8
Proline Inside Job M3
Proline Holeshot M3
Losi Digits Green
Losi Block Head Green

Losi block heads will be best, then digits, then inside jobs, holeshots are mainly good for a hard surface track

it wasent a horse show! LOL, went camping. ill be there.
i cant beleive how fast this sc8 is! we should have drag races. haveing to turn right and left screws me all up...LOL
Spoken like a true basher!!!!!!!!!!!!!!

Sorry, camping is cool horse shows............Well, let's just say if involves horses it had better go vroom, vroom too! Just saying!

Spoken like a true basher!!!!!!!!!!!!!!

Sorry, camping is cool horse shows............Well, let's just say if involves horses it had better go vroom, vroom too! Just saying!

i dont like horse shows either. unless my daughter is in one!

Losi block heads will be best, then digits, then inside jobs, holeshots are mainly good for a hard surface track

Thanks Mike

Stoped by the track today, lights look cool. Great job Revo and company.
Looked like Randy or someone had done some smoothing on the track looks great.

Hey, I think we all need to thank Casey for the lights, without him doing that, we all would be missing lamps from our houses, light stands from our garages, we would have extention cords ran every damn direction, and we would all be scrambling to mount up some dang little led lights to our vehicles that would likely be broken before dark!!! So, thank you Casey, you are the man!!!

Hey, I think we all need to thank Casey for the lights, without him doing that, we all would be missing lamps from our houses, light stands from our garages, we would have extention cords ran every damn direction, and we would all be scrambling to mount up some dang little led lights to our vehicles that would likely be broken before dark!!! So, thank you Casey, you are the man!!!

Thanks Brad
We like Helping out tracks like NMRCC

You deserve a big thanks also as you did a lot above and beyond
Thanks to Tipper and Randy and Thanks to Maxiumus Oil Feild Service for there equipment to come and get them

Aaaaawwwwwww Jjjjeeeeeezzzzzz, this just feels like one big happy family :-0 !

Yes, that's a kiss in case you where wondering....LOL!

I'm new to this forum, so I'm having trouble finding an address or cross street reference for the location of the track for the July 2nd race. I only have a Rustler for now, but thought I'd check it out and see where the track was at. I work in Gaylord and live over towards Alba. Also, what is the charge for registration and stuff at the track? Thanks!

I'm new to this forum, so I'm having trouble finding an address or cross street reference for the location of the track for the July 2nd race. I only have a Rustler for now, but thought I'd check it out and see where the track was at. I work in Gaylord and live over towards Alba. Also, what is the charge for registration and stuff at the track? Thanks!

The cross street would be MT.Jack rd and c42. I'm sure some will post registration fees as there are a few different routs to take with membership, or family, or just one race.

I take c42 home almost every day from work. very surprised I haven't seen it.

I take c42 home almost every day from work. very surprised I haven't seen it.

comeing from gaylord after turning onto c42, its about 4 miles down. its in a feild on left, there is a pole barn and you cant miss the drivers stand.

cool, I'll take a look...maybe when the weather is nicer. :-) Stopping by Hobby shop to pickup servo...went bad on Sunday at the fair grounds track.

Defender, where in the field at the end of mt. Jack rd and old alba. Night race this sat. Hope to see you there.

JJohnston, would the x-run system hold up to a monster truck?
HPI called today said they were replacing the ESC because it was bad and motor was good. They can't answer the question of why the esc has melted down twice.

JJohnston, would the x-run system hold up to a monster truck?
HPI called today said they were replacing the ESC because it was bad and motor was good. They can't answer the question of why the esc has melted down twice.

Oh yeah, the Xerun, SC8 (also Hobbywing) or the Mamba Monster
Just doesnt seem right that little 1/10 scale ESC in that huge Monster Truck you know?... I know they work very well in 1/8 Buggy but your Savage is quite a bit bigger than a buggy.
Just sell me that MMP I need one :wave:

HobbyWings are only rated to 4s though..

I feel your pain, I did this same thing with Castle last year.. wasted a whole season of 1/8 racing

Oh yeah, the Xerun, SC8 (also Hobbywing) or the Mamba Monster
Just doesnt seem right that little 1/10 scale ESC in that huge Monster Truck you know?... I know they work very well in 1/8 Buggy but your Savage is quite a bit bigger than a buggy.
Just sell me that MMP I need one :wave:

You have the 150a xe-run you would trade?
Or a turnigy track star? A rebadged RX8
you know something that will Handel the savage and a 2350 motor on 14.4volt.