http://i679.photobucket.com/albums/vv151/waters292/rcpicBR009.jpg

4X4 SC

1. Jeff S.
2. BoB T.
3.Randy M.

http://i679.photobucket.com/albums/vv151/waters292/rcpicBR002.jpg

Stock SC B Main

1. Tim C.
2. Patrick D.
3. Chris C.

http://i679.photobucket.com/albums/vv151/waters292/rcpicBR005.jpg

Stock A Main.

1. Jason J.
2. Kyle M.
3. Mike H.

http://i679.photobucket.com/albums/vv151/waters292/rcpicBR007.jpg

Mod SC A Main.

1. Jason J.
2. Kyle M.
3. Chris C.

needed mamba monster 2650 kv system and hardcase lipo for my ve8. lipo needs to ne 138mm long thanks

PM me if your interested in pictures. The truck has several performance add ons and also spare parts and original parts will be included. The truck has Carbon front shock tower (taller), CNC shock stower, Carbon Rear Shock Tower, CNC Rear Shock tower. Has larger shocks up front, Has slash reaer wheels all the way around. Will come with two bodies. one for use with the larger wheels and one for use with the stock wheels. Will also have several other CNC and carbon upgrades.

Has newer drive shafts. very very clean truck. Will come with spare a-arm, towers listed above, body mounts all kinds of other things.

Has bowtie tires mounted to jconcepts rulux wheels.

Price... $350

The truck comes stock at 269.00 (from the stores) this truck is no where near stock. I will give away a set of beadlock rims also as long as the 350.00 is met. There is well over 600$ in parts for 350$ in price.

I have a novak HV 5.5 also that I will part for very cheap if sold with the truck. I also have a servo for it.

Oh the truck also has CVD shafts at all ends.

Congratulations to all the winners and everyone who came out to race. From the sounds of it, there was some great competition out there for this race. Lots of talent in the SCT class right now, makes for some fun, fast racing. Looks like Kyosho walks away with Bragging Rights for now. See you all in October for Bragging Rights III.

See you all in October for Bragging Rights III.
Indoor or outdoor for BR III?

Indoor or outdoor for BR III?
Its early October, holding it on the 9th. So if mother nature cooperates its outside, if not inside.

Thanks everyone. Had an awesome time yesterday. In both the morning and evening programs, good times and good friends. Racing was pretty cool too !

http://www.youtube.com/watch?v=9giqxVoDps0

Agreed!! SC program was great, especially the extra qualifier.

http://www.youtube.com/watch?v=p8OFZDZwW-Y

http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9127&Product_Name=Turnigy_Brushless_Car_Power_System_23 50Kv/150A

does anybody use this system in their 1/8 scale electric buggy?????

http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9127&Product_Name=Turnigy_Brushless_Car_Power_System_23 50Kv/150A

does anybody use this system in their 1/8 scale electric buggy?????

For the $ your better off with the castle MMM and a 2200

For the $ your better off with the castle MMM and a 2200

so get a mamba max pro esc and a 2200 kv motor? can that esc handle that motor with a 30c turnigy 4s lipo?

so get a mamba max pro esc and a 2200 kv motor? can that esc handle that motor with a 30c turnigy 4s lipo?

mmm is a momba monster, 2200 kv and turnigy 20c 4s lipos and you will have all the power you want.

I'm really low on money also. So cheaper the better. So it sounds like a mmmpro and mm motor will work fine?

I have seen Mamba Monster ESC all the time on RcTech for $100
OR
get a Mamba Max with a capacitor for less than the MMM

What about a 2200kv motor? I don't have an account on rctech yet but about ready to.

2200 is good alll around
2650 is way to much

Do you have the pics from the Nitro?

I'm really low on money also. So cheaper the better. So it sounds like a mmmpro and mm motor will work fine?

NOT mamba pro.
Monster mamba max MMM it's a larger 1/8th scale esc

Mamba Max Pro new in the box $125. PM me if interested.

Thanks,
Duke.

Oh ok. But you can run a mamba max pro with a 1\8 scale motor I heard.

Oh ok. But you can run a mamba max pro with a 18 scale motor I heard.

You can do all kinds of things, but should you?

No because it can cause problems and a loss of money and time

buy nice or buy twice.

buy nice or buy twice.

i like that!!!! thanks for the advice gs. i know some guys run that turnigy system down there and it seems to do good so i think im going to have to try it out

spicy burp!

spicy burp!funky fart

Do you have the pics from the Nitro?I'm not sure they ran one

I'm not sure they ran one

Yes, they did run the first round at Proving Grounds a few weeks ago....

Yes, they did run the first round at Proving Grounds a few weeks ago....who was the winners

who was the winners

Not me... LOL

Kay won both buggy and truggy. Scott Ullig was 2nd with buggy, I believe. Not sure who was 3rd in buggy. Terry Jonas was 2nd with truggy and Mike Sabina was 3rd.

Not me... LOL

Kay won both buggy and truggy. Scott Ullig was 2nd with buggy, I believe. Not sure who was 3rd in buggy. Terry Jonas was 2nd with truggy and Mike Sabina was 3rd.thanks I was curious

So, I have some goose bumps for a 10 scale. I also have some trinty bomb 1 inserts. Will these work well with the tires I have . I believe the tires are a soft compound.

Do you have the pics from the Nitro?
Yes I have the photos of the winners on a CD downstairs I need to pull the images off of it and get them up, thanks for reminding me. :thumbsup:

thanks I was curious
When in doubt....

www.TeamVirusRacing.com

Always has the results up there.

This sound's like alot of fun! I will for sure need to get new glasses!

Mamba Max Pro only ran a few practice runs $100
Field Programmer $20

PM me if interested.

Nick Max

Proving Grounds is making the "News" again. Go get a copy of the Advance News Paper for today, May 4 and we are on the FRONT PAGE baby!


http://www.mlive.com/grandvalleyadvance/index.ssf/2010/05/competition_drives_friendships.html

Jammin Truck has been sold. Slash 4x4 PE on the way to replace it. Less money and RPM parts all around. Now I can have fun in the 4x4 class.


You read that right. I sold a jammin to get a slash... whooo there I said it.


PM me if your interested in pictures. The truck has several performance add ons and also spare parts and original parts will be included. The truck has Carbon front shock tower (taller), CNC shock stower, Carbon Rear Shock Tower, CNC Rear Shock tower. Has larger shocks up front, Has slash reaer wheels all the way around. Will come with two bodies. one for use with the larger wheels and one for use with the stock wheels. Will also have several other CNC and carbon upgrades.

Has newer drive shafts. very very clean truck. Will come with spare a-arm, towers listed above, body mounts all kinds of other things.

Has bowtie tires mounted to jconcepts rulux wheels.

Price... $350

The truck comes stock at 269.00 (from the stores) this truck is no where near stock. I will give away a set of beadlock rims also as long as the 350.00 is met. There is well over 600$ in parts for 350$ in price.

I have a novak HV 5.5 also that I will part for very cheap if sold with the truck. I also have a servo for it.

Oh the truck also has CVD shafts at all ends.

Should have sold the Jammin and SC10 to buy a Kyosho........hahahahaha!!!

Should have sold the Jammin and SC10 to buy a Kyosho........hahahahaha!!!

next year maybe I will look. I cancelled my back order on my SC10 FT and then decided to sell the jammin to put parts into the Slash and make it a robust racer/basher. Cause its gonna eat Kyosho's for dinner on practice nights...lol

Looking for a Brushless Mod motor for a 4x4 Truck 9.5 or lower. Looking to trade a good but used 17.5 for the motor. Can be used but in good shape.

Let me know if you want to trade. If not if you have one to sell let me know.

Hey guys doing an indoor track rebuild this Sunday (mothers day). If you can help out Sunday please get in touch with me.

An excavator and loader will remove and turn dirt Saturday night, so Sunday will go really smooth.

Hey guys since I consider all of you friends, I wanted to let you know that my father had another stroke. This time they said he won't come back from, they are calling in hospice and project 2 weeks at the most. So I will probably miss some racing. Just want to let you guys know what is up. Sorry for the downer on the thread.

Hey guys since I consider all of you friends, I wanted to let you know that my father had another stroke. This time they said he won't come back from, they are calling in hospice and project 2 weeks at the most. So I will probably miss some racing. Just want to let you guys know what is up. Sorry for the downer on the thread.
Sorry to hear that Don, I know how that goes all to well. Today is the anniversary of my brothers death and tomorrow is the anniversary of my fathers death....so its all to clear too me what your going through. Try to stay strong, its always family first, everything else is a distant second. If you and the family need anything, please do not hesitate to ask.

Hey guys since I consider all of you friends, I wanted to let you know that my father had another stroke. This time they said he won't come back from, they are calling in hospice and project 2 weeks at the most. So I will probably miss some racing. Just want to let you guys know what is up. Sorry for the downer on the thread.

Your family is great. Hate to hear you're going through all this.

Hey guys since I consider all of you friends, I wanted to let you know that my father had another stroke. This time they said he won't come back from, they are calling in hospice and project 2 weeks at the most. So I will probably miss some racing. Just want to let you guys know what is up. Sorry for the downer on the thread.

My prayers are with you Duck Family.

Hey guys since I consider all of you friends, I wanted to let you know that my father had another stroke. This time they said he won't come back from, they are calling in hospice and project 2 weeks at the most. So I will probably miss some racing. Just want to let you guys know what is up. Sorry for the downer on the thread.

My prayers are with you and your family.

So sorry to hear this Duck, our thoughts are with you.

On the other side, monday night @ 10:12 my wife and I welcomed our little 8# 12oz. 20.5" girl into the world. Lennie Elizabeth Reckner or baby Dart. lolol

Revo---you were right man, too amazing for words.

Hey guys doing an indoor track rebuild this Sunday (mothers day). If you can help out Sunday please get in touch with me.

An excavator and loader will remove and turn dirt Saturday night, so Sunday will go really smooth.

I will stay Saturday after racing till 2 and help when I can.