who does the custom painting down there? i am from gaylord and someone has done the sewickis bodys and i really like it.

Looking for a Spektrum Receiver if anyone has one for sale.

I want to thank EVERYONE at Proving Grounds for all the info and insight you have given me and my friend in the last couple weeks. We both went and bought trucks and you will see us with our Slash 4x4 soon. Thanks again everyone.

Mudge

What time does the track open up tomorrow? I saw on the virus web site it says 5:00pm to 10:00pm, but was not sure if this was race times or actual track hours. Thanks.

What time does the track open up tomorrow? I saw on the virus web site it says 5:00pm to 10:00pm, but was not sure if this was race times or actual track hours. Thanks.
Yes we are there by 5:00pm and sometimes stay a bit (or a lot) later than 10:00pm. :thumbsup:

who does the custom painting down there? i am from gaylord and someone has done the sewickis bodys and i really like it.

http://www.diggitydesigns.com/index.html

http://www.darksidedesigns.net/

Cant go wrong with either one of these guys if you want the best.

who does the custom painting down there? i am from gaylord and someone has done the sewickis bodys and i really like it.

Kenny Befus does an excellent job!

Thanks. Do u know how much it costs and how it works?

I am gonna try to promote both races at the Nitro Big Kahuna this weekend! Hoping for a big turn out for both events!! Gotta love 1/8th scale!!

MBX5T Prospec roller,nitro parts too with RC monster electric conversion 120.00
NIB neu 1515 1y f 150.00 Motor has many 3 and 4mm holes. Sweet motor.
http://www.rc-monster.com/proddetail.php?prod=NEU_1515_1yF&cat=20
mm,ubec.fan,hooked to madusa 36-70-2000kv 120.00
NIB spectrum reciever 65.00
max amps 5500 saddle 40.00
Can bring items to E,s tonight.
OBO on items,with respect
any ? call 616 283 0947

I have 1 for ya, never opened. The neu is also brand new, retails for 244. going on ebay thur.
call me when your going to the track so I can hitch a ride!

Now on the e of bay
thanks for looking

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140386295053&ssPageName=STRK:MESELX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140386326042&ssPageName=STRK:MESELX:IT

What time does the track open up tomorrow? I saw on the virus web site it says 5:00pm to 10:00pm, but was not sure if this was race times or actual track hours. Thanks.

racing starts at 6.30pm. I usully show up at 6.35:freak: Lol

Looking for a Spektrum Receiver if anyone has one for sale.

duke bradshaw has some for sale..

Thanks. Do u know how much it costs and how it works?

Ya pay for what you get :thumbsup:

No one will quote you a price until you explain to them or show they what your looking for also.

I have to work every saturday till 3 but im only a few minutes away so thats not to bad, if i miss one heat race not a big deal. There are lots of us who still have to work saturday. That gives a chance to get there still. The late nights arent ideal but ill still be there every saturday even if we dont change. I wont be able to race wednesdays anymore shortly here cause ill have to work till 7 every weekday so that only leaves saturdays, if you start sooner than 3 i wont be able to race at all.

Thanks. Do u know how much it costs and how it works?
Darkside is the most expensive, Diggity is more reasonable. But you purchase a body the paint colors you want, then send it to them with a check and they paint it and ship it back to you.

Best thing to do is contact them and discuss what your looking for and get some pricing. :thumbsup:

I had the opportunity to see some of Darkside's work up close, awesome!! I let them know what I wanted and they returned with a quote in 1-2 days.

I had the opportunity to see some of Darkside's work up close, awesome!! I let them know what I wanted and they returned with a quote in 1-2 days.

Kris Norlock(darkside designs) is the man at paint.

Kris Norlock(darkside designs) is the man at paint.

Yes he does great work.

racing starts at 6.30pm. I usully show up at 6.35:freak: Lol

I wanna go too.

That's too bad.. This is a cool idea. I know I might have benefited from such data.


Say please...... :thumbsup:

Mike Slaughter

What Are We Talking About I Forgot??????

What Are We Talking About I Forgot??????


Oh snap! Batteries my friend. They are off to the virtual printing press.....

Mike

I'll be there tonight. Weather is getting pretty bad. I hope that doesn't keep everyone else from showing up!

I'm in for tonight, don't get to many opportunities to make it on Wed's.

getting ready for the nitro rising, just installed front and center smart diffs on a 1.0 losi truggy. wont have time for testing, any suggestions on rear diff fluid?

thanks

getting ready for the nitro rising, just installed front and center smart diffs on a 1.0 losi truggy. wont have time for testing, any suggestions on rear diff fluid?

thanks

I run 2000 in the rear on my buggy. Make sure you check those smart diffs often for grease. I had them in the front and center on my buggy and the grease was gone in one race day. I went back to the stock diffs. Search on RCTECH for setup help on the truggy, also you can try different springs in the smart diffs. Losi's website has a lot of info on what springs to what as far as cornering on and off throttle and exiting corners. Hope this helps, see you at the Rising!

ya im motivated by some of the Sewicki Team's bodys he has done. looks amazing. thanks everyone. i will look into it.

What would be a good motor to go with my gtb for my b44. It has a 6.5 motor in it right now and its way to much for me to learn how to drive it smooth.

What would be a good motor to go with my gtb for my b44. It has a 6.5 motor in it right now and its way to much for me to learn how to drive it smooth.

you could just turn your EPA down on your radio and save some cash.:thumbsup:

getting ready for the nitro rising, just installed front and center smart diffs on a 1.0 losi truggy. wont have time for testing, any suggestions on rear diff fluid?

thanks

2000 in rear diff

Man oh Man! I was on my home tonight from the track and I put my Jeep about 15 feet off the side of the road in a big ole ditch! was in too good to get out with 4wd.. Got to get a truck out there later today to yank it out! Just about slipped and fell on my butt when I took one step on the road.. it was SOLID ice!

It was pretty slick last night

Man oh Man! I was on my home tonight from the track and I put my Jeep about 15 feet off the side of the road in a big ole ditch! was in too good to get out with 4wd.. Got to get a truck out there later today to yank it out! Just about slipped and fell on my butt when I took one step on the road.. it was SOLID ice!

Ouuchh !! Maybe you should try some holeshots on the Jeep next time :rolleyes:
Just kidding Glad you didnt Roll it:wave:

Maybe even some barcodes. lol


I am looking for an Axial roller if anyone knows someone let me know please.

J

I run 2000 in the rear on my buggy. Make sure you check those smart diffs often for grease. I had them in the front and center on my buggy and the grease was gone in one race day. I went back to the stock diffs. Search on RCTECH for setup help on the truggy, also you can try different springs in the smart diffs. Losi's website has a lot of info on what springs to what as far as cornering on and off throttle and exiting corners. Hope this helps, see you at the Rising!

thanks guys and E

Thanks for making a joke out of my terrible luck guys! :thumbsup:

haha J/P anyway, we yanked it out first thing today.. and the jeep seems to be fine.. can't find anything wrong with it yet. So I might have actually lucked out this time over all. :dude:

yes, lucky! You've been very lucky lately.....

Safe to say I can't drive a stadium truck, anybody want a T4, I think I'll stick to SC.

Safe to say I can't drive a stadium truck, anybody want a T4, I think I'll stick to SC.
How long did it take you to get decent at SC? Why would stadium truck be any different? Patience and time it will come to you if you give it a chance. :thumbsup:

Got some plans for the future and it starts with selling the T4.

Probably ends with buying a losi... hahahaha

Got some plans for the future and it starts with selling the T4.

Is it health care reform?:dude:

Got some plans for the future and it starts with selling the T4.

Wanna trade my netbook for it?...lol

(unless somone wants to trade a buggy for it? AE Only Factory version roller)

Welcome to my world, its only been two years. Cryin' after one night--PALEASE

Although the 4wd Slash is pretty simple to run and with a group of them it might just very interesting out on the track!

Kerby gettin called out ! hahahaha

LOL!!! 4WD not for me but I will be trying something new very soon. Len I think I figured out my issue, I forgot to reset my radio after Columbus such as throttle response ect; oops!

Safe to say I can't drive a stadium truck, anybody want a T4, I think I'll stick to SC.

Personally I think this is nonsense. There is no way an SC will handle as well as a Stadium truck.. You need to set the thing up. How much you want for it?

Why is no one pimpin' Andy Curran? "In this area" would mean Andy and Andy alone. Norlock is on the other side of the state and Diggs is impossible to get a hold of unless you go through Tim or Apple. 02CooperS for the win punks.

Jason

Personally I like SC much better, I'm just talking crap.

+1..I just got two more bodies from Andy he does great work