Send it back to Novak. Tell them you have a problem with the lipo cutoff kicking in sporadically.

Yup gonna do that, get the firmware updated and unload it and get an RS :thumbsup: . I'll keep the Ballistic though.

Yup gonna do that, get the firmware updated and unload it and get an RS :thumbsup: . I'll keep the Ballistic though.

If you are going to run a SC speedo with Novak run the GTB and not the Havoc Pro.

Yup gonna do that, get the firmware updated and unload it and get an RS :thumbsup: . I'll keep the Ballistic though.

You running th Ballistic 550?

You running th Ballistic 550?

Nah, in my SC10 just a regular Ballistic can.

Here is a video from Station2. I'll be posting the rest over on the Station2 thread.

SC 4WD A-main
http://www.youtube.com/watch?v=EEBDlT0tGvI

Nah, in my SC10 just a regular Ballistic can.

Got it.

What did Steve get lost on his three hour tour?

Adam/Mark/Dave, how did you find it running at the Station with those open pipes in turn 2 & 3 ?


If I timed my entry correct while running the oval you could really turn some fast laps getting real close to the pipe but it almost scares you into running wide which then leads you into hitting the back stretch wall.

While running off road I don't know that I even thought about it or had any issues with them because your not coming at them in that scary angle you would be on the oval. Having said that I think having the 90 degree pipes buried like we do at DR could curtail some potential broken parts.

If I timed my entry correct while running the oval you could really turn some fast laps getting real close to the pipe but it almost scares you into running wide which then leads you into hitting the back stretch wall.

While running off road I don't know that I even thought about it or had any issues with them because your not coming at them in that scary angle you would be on the oval. Having said that I think having the 90 degree pipes buried like we do at DR could curtail some potential broken parts.
They could also make the pipe shorter going into 2 and 3. That would make the off-road shorter because you wouldn't have to wait so long to make the U-turn but it would help the oval people.

I'm really not in favor of features on a track that set you up to break your car if you make a small mistake. Burying the end gradually gives you a launching ramp. If they did it like we do the pipe ends at DR (the 90 degree angle into the ground) that makes it a hard object to run into, kind of like a bridge abuttment.

All the videos I have of the mains I have are posted. youtube.com/tobamiester. Enjoy

All the videos I have of the mains I have are posted. youtube.com/tobamiester. Enjoy

thank you for the videos....damn the 4wd buggy was close...at the end.

might not have my parts for this weekend.....i forgot today was Tuesday Duh...

Boy this forum stinks now. Who wants to drama to get things going again?

Associated to the front !

Any takers ?

Associated to the front !

Any takers ?

Associated to the wall!:thumbsup::cool:

Associated to the wall!:thumbsup::cool:

LMAO :thumbsup:

I knew you were out there somewhere watching this thread :dude:

LMAO :thumbsup:

I knew you were out there somewhere watching this thread :dude:

I gotta pop in and out, don't want to leave the board up at work:wave:

With the growing list of broken Havoc Pro's we can all whine and complain about that right?

With the growing list of broken Havoc Pro's we can all whine and complain about that right?

Absolutely. Not happy with mine at all. Mine seemed to run fine in NIMH mode. I'll keep it for Sunday then send it in for a firmware update (if that is what the problem is)

Absolutely. Not happy with mine at all. Mine seemed to run fine in NIMH mode. I'll keep it for Sunday then send it in for a firmware update (if that is what the problem is)

Do you have something else to use in it for the following race? I sent mine Wed. of the week we last raced at DR and Alvin said they are not sure when I will get my replacement back to me.

Do you have something else to use in it for the following race? I sent mine Wed. of the week we last raced at DR and Alvin said they are not sure when I will get my replacement back to me.

Not sure. I might just pull the tekin out of my 12th scale Oval car (thats gathering dust).

Do you have something else to use in it for the following race? I sent mine Wed. of the week we last raced at DR and Alvin said they are not sure when I will get my replacement back to me.

If it makes you feel any better mine hasn't been looked at either. But I am not making this weeks race.

What did Steve get lost on his three hour tour?

Nope. The boat is a driveway ornament for the next week or two. Need to get the boaters safety course done, then get the boat endorsement on my drivers license so the State Police Marine Division wont get me. The first 3 hour tour will be on Fathers Day weekend.

I went to Trains & Lanes Sunday to see what the new off road track looks like. It doesnt look anything like the RC Tech thread says. Its over grown with weeds. Doesnt look like they worked on it for a few weeks? The surface is the same as the old track..........dirt. Theres lots of stone mixed in the surface, with much larger rocks on the sides of the track. The jumps are very big, and are 1/8th scale friendly only. Anything smaller will have trouble clearing them. Also the jumps are very steep, so I think there will be many broken parts from that. Big air in my opinion. It definately has potential, but as it looks now, I wont be racing there on off DR weekends. I guess I would limit that anyway since I have the fishing boat now.

Anyone selling a Traxxas VXL system?

With the growing list of broken Havoc Pro's we can all whine and complain about that right?
The people who are using Mambas (me) don't have to whine and complain.:dude:

Yet, anyway.

If it makes you feel any better mine hasn't been looked at either. But I am not making this weeks race.
If they are just sending you GTBs as replacements, what's to look at?

The people who are using Mambas (me) don't have to whine and complain.:dude:

Yet, anyway.


If they are just sending you GTBs as replacements, what's to look at?

For me it's not just a GTB replacement. Plus they need to weed through the other returns as well.

Mark as for your question I am waiting on pricing. Part number is S5051.

Yea my VXL is running just fine too. LOL (Thats for you Tobey)

Mark:
Alvin and I will not be at the next race, but will be there for the Fathers Day race. Can you bring the Clone PT's with you?
Thanks!

Yea my VXL is running just fine too. LOL (Thats for you Tobey)

The car that has the Havoc Pro isn't a Slash. LOL

I think the VXL is a great system for the price btw other than the crappy on/off switch on the ESC.

Nope. The boat is a driveway ornament for the next week or two. Need to get the boaters safety course done, then get the boat endorsement on my drivers license so the State Police Marine Division wont get me. The first 3 hour tour will be on Fathers Day weekend.

Look on the bright side of things if its in your driveway when you through your money in the boat it should land on your driveway. (no one likes wet money) lol

Associated to the front !

Any takers ?

Associated to the wall!:thumbsup::cool:

Bob and I will put the Malouchie crunch on you ( obscure Happy Days reference ) . Better bring a lot of spares . :tongue::cool:

Bob and I will put the Malouchie crunch on you ( obscure Happy Days reference ) . Better bring a lot of spares . :tongue::cool:

yeah, I got alot of spares. Looks like I might need to expand my tool boxes for some OFNA and Losi parts for yous guys too :thumbsup:

yeah, I got alot of spares. Looks like I might need to expand my tool boxes for some OFNA and Losi parts for yous guys too :thumbsup:

I gots plenty of dem thar OFNA parts:freak::cool:

yeah, I got alot of spares. Looks like I might need to expand my tool boxes for some OFNA and Losi parts for yous guys too :thumbsup:

Got everything I need :tongue::cool:

Got everything I need :tongue::cool:

You both got da parts, but you don't got the TQ :thumbsup:



(man I can't believe I am opening myself up this this kind of abuse)

You both got da parts, but you don't got the TQ :thumbsup:



(man I can't believe I am opening myself up this this kind of abuse)

Enjoy it as it will be you last:devil::tongue::cool:

The car that has the Havoc Pro isn't a Slash. LOL

I think the VXL is a great system for the price btw other than the crappy on/off switch on the ESC.

The LOL was being referred to you. Not the ESC problem.

Bob and I will put the Malouchie crunch on you ( obscure Happy Days reference ) . Better bring a lot of spares . :tongue::cool:

I remember that Dano.

You both got da parts, but you don't got the TQ :thumbsup:



(man I can't believe I am opening myself up this this kind of abuse)

TQ and leading the most laps means squat. All you have to do is lead the last lap in the A Main.
Yes once said, it comes at you from all directions.

The LOL was being referred to you. Not the ESC problem.

Sorry. LOL-disorientation on my part.

Mark:
Alvin and I will not be at the next race, but will be there for the Fathers Day race. Can you bring the Clone PT's with you?
Thanks!
Please remind me the day before the race.

Please remind me the day before the race.

Will do.

Steve if you need a capitain for your boat, lmk, I have all my credintials
You late model guys, my OFNA is almost ready!!!!!,it will be nice to Toby's assoc. since he let me test drive it:thumbsup::cool::thumbsup:

So, my ballistic motor came in for my sprint, but I didn't order a sensor wire, I didn't even think about it since the old motor had it built in. Does anyone have one I can borrow for Sunday?

So, my ballistic motor came in for my sprint, but I didn't order a sensor wire, I didn't even think about it since the old motor had it built in. Does anyone have one I can borrow for Sunday?

I got one you can have NIB for $6.50.

if its long enough its sold.

if its long enough its sold.

200mm

Just got my UPS notification from Novak, will be delivered June 8th, I am sure that works out for someone someplace, but I won;t be running SC mod this weekend. :cry:

200mm

That should be fine, I will take it.

That should be fine, I will take it.

i'll put it in my toolbox now so I don't forget.