Mark, do you still have the sheet from the last sprint qualifier? If so, what was my fastest lap?

Your only gonna have to worry about my lap times come Sunday. I hope your timing isn't already advanced. :p

Looks like this guy wants a truggy. And I just met a guy with a truggy who wants to race this Sunday. Considering one myself. Sounds alive and kicking to me..

Tobey, once again you are right.

Tobey, once again you are right.

He's a Brit there always right with that accent.:)

Slash PE

Nice! New sneaks on that? Nice and clean.

He's a Brit there always right with that accent.:)

I think they call it "Queens English"?

Nice! New sneaks on that? Nice and clean.

They are. It's a modified Ivan "iron man' Stewart's paint job

They are. It's a modified Ivan "iron man' Stewart's paint job

Looks good. You paint it?

Not when I'm driving it:cool:

Oh Boy, am I gonna have to Put Steve in the indoor car:rolleyes:

I doubt the old man is gonna let you wheel his Sprint.:cool:

Looks good. You paint it?

Yup, shot it last night. Just one less thing on my to do list before Sunday.

Slash PE

Why don't you just light the stove and put it out of its misery:wave:

Oh Boy, am I gonna have to Put Steve in the indoor car:rolleyes:

I doubt the old man is gonna let you wheel his Sprint.:cool:

Idk....I have everything and I was told to swap motors...hmmmm

I have the sheet from the 1st qualifier, you were in the 2nd - I don't have your times.

Thanks Mark. See that's how much attention I'm paying.:freak:

Idk....I have everything and I was told to swap motors...hmmmm

He'll let you work on it, but you ain't wheelin it.:dude:

If that thing is not done by Sunday, we'll build it at the track!

He'll let you work on it, but you ain't wheelin it.:dude:

If that thing is not done by Sunday, we'll build it at the track!

I'm staring at it as we speak

I took the GTO to prom, I think he can watch me wheel his sprint around the track.

I'm staring at it as we speak

I took the GTO to prom, I think he can watch me wheel his sprint around the track.

I don't smell any hot flux yet:rolleyes:

Bob, pm

heres my stable all ready for sunday and backups to boot !:thumbsup:

wayne pre reg ;
sprint - personal - spek
edm - personal - spek
slash oval - house transponder - xmod #12
4 x 4 buggy 1/10 - personal - spek

thanks ray

Adam Zuidema

2WD Buggy Off Road ~ Spektrum
Sprint Car ~ Spektrum
Slash Off-Road ~ Spektrum
1/8 L8 Model ~ Spektrum
Mod SC Off-Road ~ Spektrum

Derek Zuidema

2WD Buggy Off Road ~ Spektrum
Mod SC Off-Road ~ Spektrum
4WD Buggy Off Road ~ Spektrum
Slash Off-Road ~ Spektrum
1/8 L8 Model ~ Spektrum

Slash PE

GOOD JOB Jr. Looks great !!! :thumbsup::cool:

Dan, do you want me to see if I can pick up a set of Calibers for your sprint?

heres my stable all ready for sunday and backups to boot !:thumbsup:

:thumbsup:

Must be getting close to race day 14 peeps down there.

hey bob ,that wing is hanging off the front pretty much aint it ,how did you mount it ,i just put one on my sprint to and used wing wire off and old wing

man that two good lookin sprint cars !!!!:cool::thumbsup::cool:

hey bob ,that wing is hanging off the front pretty much aint it ,how did you mount it ,i just put one on my sprint to and used wing wire off and old wing

That's the CW 9055 wing and mount. The new cages have mounting points for the wings. The thing is BIG 4.5 inches wide. I don't know if it will be a help or a hindrance. Saturday testing will tell I hope.

Ray, I put some pictures in My Pictures. You can see how the wing mounts.

what time you goin up saturday

what time you goin up saturday

Not sure probably early. I'll let you know.

JT make some space your box is full.

JT make some space your box is full.

i just did

Dan, do you want me to see if I can pick up a set of Calibers for your sprint?
If you could that would be great ! :thumbsup::cool:

If you could that would be great ! :thumbsup::cool:

B4 wheels? The wife said she will go tomorrow.

Slash PE

Look good JT :thumbsup:

Hi guys my platium slash is still for sale . like i said im looking for 380 with custom painted body . if any one is interested we can talk just e-mail me at ,,, YAMAJACR6@AOL.COM OR Call my cell at (551)404-5772 . i'll be raceing this comming sunday and i'll have it will me with the box and parts that came with it . please help me sell it i realy want to get a nirto mugen mbx6t truggie to race instead .

ps,,,, JT i sold my xray truggie bec i lost my job two years ago

B4 wheels? The wife said she will go tomorrow. Should be . Thanks:wave::cool:

Got some LM testing in before the rain :( New Springs and Clutch Bell. Motor had plenty of power and the car handles pretty decent, just need to work on the driver :)

The Oval is def going to need some work for Sunday. Pretty rutted up. Also, the loop/pipe is showing in front of the drivers stand.

Got some LM testing in before the rain :( New Springs and Clutch Bell. Motor had plenty of power and the car handles pretty decent, just need to work on the driver :)

The Oval is def going to need some work for Sunday. Pretty rutted up. Also, the loop/pipe is showing in front of the drivers stand.

I think we have a small issue with the oval maintenance right now. We can use the iron maiden and the grate to level it out, but we have no roller to roll it. I don't think it has been or can be repaired. The old steel roller needs to be welded back together, so it is also unusable I believe.

Hi guys my platium slash is still for sale . like i said im looking for 380 with custom painted body . if any one is interested we can talk just e-mail me at ,,, YAMAJACR6@AOL.COM OR Call my cell at (551)404-5772 . i'll be raceing this comming sunday and i'll have it will me with the box and parts that came with it . please help me sell it i realy want to get a nirto mugen mbx6t truggie to race instead .

ps,,,, JT i sold my xray truggie bec i lost my job two years ago

Has it been that long ago that I worked at Ron's? Where does the time go..

Hey Jt,

Get the sprint together? My wife is going to see if she can pick up tires for it today.

I think we have a small issue with the oval maintenance right now. We can use the iron maiden and the grate to level it out, but we have no roller to roll it. I don't think it has been or can be repaired. The old steel roller needs to be welded back together, so it is also unusable I believe.
Maybe get some slicks for the tractor and just make lots of laps with the slicks on?:lol::lol::lol:

Maybe get some slicks for the tractor and just make lots of laps with the slicks on?:lol::lol::lol:

Maybe we can wrap the tires in Saran Wrap:):thumbsup:

Maybe get some slicks for the tractor and just make lots of laps with the slicks on?:lol::lol::lol:

Trains & Lanes, when they used to run, had a super smooth oval. They wrapped their tractors tires with duct tape.

I think we need a 36" metal lawn roller. 3/4 Filled with very dry sand.

Or if anyone has a portable welder, re-weld the old roller.

I think we have a small issue with the oval maintenance right now. We can use the iron maiden and the grate to level it out, but we have no roller to roll it. I don't think it has been or can be repaired. The old steel roller needs to be welded back together, so it is also unusable I believe.
What happened to the roller? I know it isn't holding water, but is it a hole puncture or a gash/slit type puncture? And is the puncture on the side or the rolling surface? It might be repairable the same way pond liners are done if it is polyethylene or PVC and the puncture is on the side, or with a plastic weld kit, like repairing a kayak.

I think we need a 36" metal lawn roller. 3/4 Filled with very dry sand.

Or if anyone has a portable welder, re-weld the old roller.

I have a portable welder. What exactly needs to be welded?

I have a portable welder. What exactly needs to be welded?

Gary, I believe there is an old roller there made out of what looks like two pieces of large diameter steel pipe. The welds holding the sections together are broken. I don't even know if it would be a viable short term solution.

The other solution that was dicussed last year, was filling the old roller (with the seat) with some sort of aggregate media. But it has many holes in it.

What happened to the roller? I know it isn't holding water, but is it a hole puncture or a gash/slit type puncture? And is the puncture on the side or the rolling surface? It might be repairable the same way pond liners are done if it is polyethylene or PVC and the puncture is on the side, or with a plastic weld kit, like repairing a kayak.

There is a slash/tear in the rolling surface near one of the ends.

I have a 36" roller just like the 48" plastic roller at the house . I'll bring it up Saturday so we can prep the oval . I don't want it used on the offroad track as this is what I think broke the one we have now .

Thanks for hooking me up Bob . :thumbsup::cool: