Got brakes again .

:thumbsup::thumbsup::thumbsup::thumbsup::thumbsup: :cool:

http://www.grossishop.com/usa/index.php?route=product/product&path=35&product_id=58

Is having an RC radiator a legal mod?

Nothing in the rules that says you cant.

http://www.grossishop.com/usa/index.php?route=product/product&path=35&product_id=58

Is having an RC radiator a legal mod?

I have seen Grossi engines before . They are not IMAR or ROAR approved . They work on a gravity system like the original watercooled Motocross bikes . There was a thead on RCtech a while back . :wave::cool:

The kid is at school, The wife is at work, This is a great recipe for RC work shop time!

The kid is at school, The wife is at work, This is a great recipe for RC work shop time!

Been doing the exact same thing this am :)

Must be nice. I get a little taste of RC during the week while on my lunch break.

Pre-Registration for May 16th

Slash Oval
Short Course Modified
1/10th Scale Buggy Off Road

All spektrum and PT3726303

Pre-Registration for May 16th

1/8th Scale Buggy Off Road
1/10th Scale Buggy Off Road

All spektrum and club transponders

Pre-Registration for May 16th

Slash Oval
Short Course Modified
1/10th Scale Buggy Off Road

All spektrum and PT3726303

What happened to the sprint and edm, is your stable sick

Pre-Reg for May 16th:

Alvin:

1/8th Electric Offroad
1/10 Short Course Modified Offroad

All on Spektrum and PT 2850553.

Pre-Registration for May 16th

Slash Oval
Short Course Modified
1/10th Scale Buggy Off Road

All spektrum and PT3726303

??????
What happened to Sprint and or EDM

I didnt get a brushless system for the EDM yet. And seeing the class races so late in the day, I probably wont now. Just like Slash off road. Its dead last and I dont want to stay that late to race it. I will be packed up and ready to go while Alvin is racing E/8. Ill be all done racing by that time. I thought I had the sprint fixed? The slipper was toast. But after test running it, I still hear something in the gear box thats not right? Everything looked ok, but something sounds off. Maybe a bearing which I didnt really look at. Whether I have it ready for Sunday is doubtful at this moment. Thats what I get for trying to run a toy with the big boys.

OK, Again I have the metal diff gear if needed. I will have it on Sunday.

I didnt get a brushless system for the EDM yet. And seeing the class races so late in the day, I probably wont now. Just like Slash off road. Its dead last and I dont want to stay that late to race it. I will be packed up and ready to go while Alvin is racing E/8. Ill be all done racing by that time. I thought I had the sprint fixed? The slipper was toast. But after test running it, I still hear something in the gear box thats not right? Everything looked ok, but something sounds off. Maybe a bearing which I didnt really look at. Whether I have it ready for Sunday is doubtful at this moment. Thats what I get for trying to run a toy with the big boys.
I have toasted both a slipper and an idler in two separate heats on one day with my Cobra Sprint. It was the first of the two days of the 2008 Challenge. Fortunately, there was still the third qualifier on Sunday.

OK, Again I have the metal diff gear if needed. I will have it on Sunday.

The gears look good. Ill see if I have time to open it up again and check once more. Ill let ya know about the diff gear. thanks!

Hey guys. Was thinking of headed up to the track tommorow to get a few laps in. If any work needs to be done I'd be more then happy to pitch in. I know when I stopped by there Saturday the whoops looked a little bare. Got some shovels and a wheel barrel if needed. Just let me know if someone will be there to open the gate or whatever. I'm off all day, so was thinking of gettin up there around noon, ofcoarse weather permitting. Thanks.

Hi dirt runner friends ,, my name is Brian yes im selling my slash 4x4 to get a truggie instead . thanks wayne for posting it up for me . i only used it the first race at dr"s . if any one is interested let me know ,please no trades. im looking to get 380.00 with a coustom painted body and if u want i could give u the lipo but i rather keep it.

please let me know by email @ YAMAJACR6@AOL.COM OR CELL # (551)404-5772


thanks...
BRIAN

PS YES I WILL BE AT DIRT RUNNERS ON MAY 16TH

Hi dirt runner friends ,, my name is Brian yes im selling my slash 4x4 to get a truggie instead . thanks wayne for posting it up for me . i only used it the first race at dr"s . if any one is interested let me know ,please no trades. im looking to get 380.00 with a coustom painted body and if u want i could give u the lipo but i rather keep it.

please let me know by email @ YAMAJACR6@AOL.COM OR CELL # (551)404-5772


thanks...
BRIAN

PS YES I WILL BE AT DIRT RUNNERS ON MAY 16TH

Are you going electric or nitro truggy? This class is struggling to stay alive.

Are you going electric or nitro truggy? This class is struggling to stay alive.

Which class Stephen ? SC Mod or Open monster (truggy) - Both had at least 3 heats last race .

Which class Stephen ? SC Mod or Open monster (truggy) - Both had at least 3 heats last race .

Truggy is dieing. Cant count last week because that was opening day. Most classes had above average entries. We had 183 entries on opening day? Thats like the first day of the Challenge. We normally get around 100? Theres about 6 to 7 dedicated racers in truggy. All others are hit and miss. Its a far cry from 3 years ago when we would routinely get 3 to 4 1/8th scale nitro buggy heats and 2 to 3 truggy heats. Look where we are now. Its a shame.

Hi dirt runner friends ,, my name is Brian yes im selling my slash 4x4 to get a truggie instead . thanks wayne for posting it up for me . i only used it the first race at dr"s . if any one is interested let me know ,please no trades. im looking to get 380.00 with a coustom painted body and if u want i could give u the lipo but i rather keep it.

please let me know by email @ YAMAJACR6@AOL.COM OR CELL # (551)404-5772


thanks...
BRIAN

PS YES I WILL BE AT DIRT RUNNERS ON MAY 16TH

what happen to the XT-8?

Mr. Speedman,

Do you know the part number of the slipper pad, for the Sprint car slipper assembly you picked up for me?

No, I didn't keep the package:freak:

Thanks :cool:

Mr. Speedman,

Do you know the part number of the slipper pad, for the Sprint car slipper assembly you picked up for me?

No, I didn't keep the package:freak:

Thanks :cool:

asc9253 is the slipper disc if ya need any other numbers let me know.

asc9253 is the slipper disc if ya need any other numbers let me know.

Thanks :thumbsup:

Thanks :thumbsup:

no problem:wave:

hey bob look i got my pic up to:thumbsup:

cant wait for the 1/8 latemodel!!!!:cool:

hey bob look i got my pic up to:thumbsup:

cant wait for the 1/8 latemodel!!!!:cool:

WOW! look at you all orange and Sprinted up:thumbsup:

L8 will hook you for sure.:cool:

now you gotta put some pics in your (my photos) section!!lol:tongue:

Mr. Speedman,

Do you know the part number of the slipper pad, for the Sprint car slipper assembly you picked up for me?

No, I didn't keep the package:freak:

Thanks :cool:

Ooops

Bob:
I just noticed a nose wing on the sprinter eh? It wasnt on your original pristine never run before picture. I can see some dirt on the tires. Nice!!!!

Bob:
I just noticed a nose wing on the sprinter eh? it wasnt on your original pristine never run before picture. I can see some dirt on the tires. Nice!!!!

I was wondering how long it would take someone to notice.:thumbsup:

I had it so I thought I'd give it a try. The thing is huge! 4.5" wide.

now you gotta put some pics in your (my photos) section!!lol:tongue:

Yeah I gotta work on that.

Truggy is dieing. Cant count last week because that was opening day. Most classes had above average entries. We had 183 entries on opening day? Thats like the first day of the Challenge. We normally get around 100? Theres about 6 to 7 dedicated racers in truggy. All others are hit and miss. Its a far cry from 3 years ago when we would routinely get 3 to 4 1/8th scale nitro buggy heats and 2 to 3 truggy heats. Look where we are now. Its a shame.

Looks like this guy wants a truggy. And I just met a guy with a truggy who wants to race this Sunday. Considering one myself. Sounds alive and kicking to me..

Alvin, I think I found your 8th Scale wheel nut :)

Alvin, I think I found your 8th Scale wheel nut :)

HOw did you find it? It is a closed hex no opening in the cetner. If it is that is it.

HOw did you find it? It is a closed hex no opening in the cetner. If it is that is it.

Oh, its a regular looking 8th scale wheel nut. Was on the track at the beginning of the whoops...

Don't think that is it. Mine had the center closed off (dust cap) and was bronze or black in colar I think.

Bob, your gonna need that nose wing this sunday!

Bob, your gonna need that nose wing this sunday!

To help push that red Havoc out of the way? I'm not afraid:) :cool:

Mark, do you still have the sheet from the last sprint qualifier? If so, what was my fastest lap?

guys, I have an Associated DS1015 Servo in my 8th scale. Just stripped the second servo horn in as many weeks. Need to get an Aluminum replacement. I think this servo is the same as the Ace DS1015, and hoping I can get an arm for that and it will work. I know Hitec don't work. Anyone have any ideas ?

What about JR or Futaba splines? I know a company makes an aluminum horn with inserts for all the manufacturer splines. Can't remember what it is called. I think Ofna makes it.

guys, I have an Associated DS1015 Servo in my 8th scale. Just stripped the second servo horn in as many weeks. Need to get an Aluminum replacement. I think this servo is the same as the Ace DS1015, and hoping I can get an arm for that and it will work. I know Hitec don't work. Anyone have any ideas ?

airtronics? i think that is what their rtr stuff is.

guys, I have an Associated DS1015 Servo in my 8th scale. Just stripped the second servo horn in as many weeks. Need to get an Aluminum replacement. I think this servo is the same as the Ace DS1015, and hoping I can get an arm for that and it will work. I know Hitec don't work. Anyone have any ideas ?

Take a ride to Crispy Critters, I'm sure they could hook you up with the correct replacement.

guys, I have an Associated DS1015 Servo in my 8th scale. Just stripped the second servo horn in as many weeks. Need to get an Aluminum replacement. I think this servo is the same as the Ace DS1015, and hoping I can get an arm for that and it will work. I know Hitec don't work. Anyone have any ideas ?

Toby - The Associated 1015 and Ace 1015 are the same servo, Both are a 25T spline, which is what Futaba also uses, so aluminum ones are easy to find. Check out the Racers Edge clamp on ones - awesomely strong and will never strip. Hitec uses a 24T spline (and no one else does, which is why servo horns for Hitec can be harder to find sometimes). Almost everything else uses a 23T - Airtronics, JR, etc.

Toby - The Associated 1015 and Ace 1015 are the same servo, Both are a 25T spline, which is what Futaba also uses, so aluminum ones are easy to find. Check out the Racers Edge clamp on ones - awesomely strong and will never strip. Hitec uses a 24T spline (and no one else does, which is why servo horns for Hitec can be harder to find sometimes). Almost everything else uses a 23T - Airtronics, JR, etc.

Thanks guys and Gary for the clarification. yeah, i'd seen the Racer's Edge ones, Integy and Hudy ones. I'll try and swing by Critters tomorrow and see if they have anything. Otherwise I guess i'll have to get Brown back to my house ..sigh.... :freak:

To help push that red Havoc out of the way? I'm not afraid:) :cool:

Not when I'm driving it:cool:

Mark, do you still have the sheet from the last sprint qualifier? If so, what was my fastest lap?
I have the sheet from the 1st qualifier, you were in the 2nd - I don't have your times.

Slash PE