...trying to stop myself writing some crude response given I've seen alot of relevant content this past week at the shore :cool:

go ahead do it!

You are headed for a whole new set of problems.;):wave:

Thanks, yes I realized this while typing but said ehhhh. Hopefully this new set of problems will be totally worth it to start a career. A "career" never thought I would be saying that.

Thanks, yes I realized this while typing but said ehhhh. Hopefully this new set of problems will be totally worth it to start a career. A "career" never thought I would be saying that.

You will be fine. But you won't believe what comes out of the customers mouths. I should write a book.

You will be fine. But you won't believe what comes out of the customers mouths. I should write a book.

Like they have potty mouths? I had a guy a week or two ago come in saying he needed new ball joints in his t-maxx. I had to have him point to the part and I was like those are called pillow balls.

Like they have potty mouths? I had a guy a week or two ago come in saying he needed new ball joints in his t-maxx. I had to have him point to the part and I was like those are called pillow balls.

It's probably best at your NEW job that you sell them the ball joints instead of the pillow balls though. :thumbsup:

Like they have potty mouths? I had a guy a week or two ago come in saying he needed new ball joints in his t-maxx. I had to have him point to the part and I was like those are called pillow balls.

Not a potty-mouth thing, more of a no brain thing:freak: And remember it is never their fault.:beatdeadhorse:

It's probably best at your NEW job that you sell them the ball joints instead of the pillow balls though. :thumbsup:

so true I should sell them pillow balls too it sounds like a must need item

Not a potty-mouth thing, more of a no brain thing:freak: And remember it is never their fault.:beatdeadhorse:

The customer IS always right. This is starting to sound like Hobbytown jjjjjustt kidding.

The customer IS always right. This is starting to sound like Hobbytown jjjjjustt kidding.

HobbyTown in 1:1 scale.

Have to go in at 4:00 am again . This sh*t is getting old !!!

Have to go in at 4:00 am again . This sh*t is getting old !!!

That does suck. It beats the Virginia commute however.

That does suck. It beats the Virginia commute however.
You got me there . :cool:

Have to go in at 4:00 am again . This sh*t is getting old !!!

Least its cooler at 4am :thumbsup:

I think we are all addicts.:freak::cool:

three weeks of a very sick sister in-law and then the funeral thisc week :(

talk about a addict jonesin for a fix:freak:and im gonna spend this weekend home to recoupe some family time and get thinks back in order if that possible,but i definitly need to do some r r r r raaaaaccciiiiin:drunk::thumbsup:

cant wait to get back to the track:wave:

three weeks of a very sick sister in-law and then the funeral thisc week :(

talk about a addict jonesin for a fix:freak:and im gonna spend this weekend home to recoupe some family time and get thinks back in order if that possible,but i definitly need to do some r r r r raaaaaccciiiiin:drunk::thumbsup:

cant wait to get back to the track:wave:

Sorry to hear Ray. Hope everyone is doing ok.

thanks bob ,everyone is good the wosrt is over for all except my brother in-law

thank you again!!

thanks bob ,everyone is good the wosrt is over for all except my brother in-law

thank you again!!

Sorry to hear of her passing Ray. I'm sure its of some closure/relief to the family so they can heal and move forward.

Hope to see you on the 15th for some play-time Buddy. :thumbsup:

Picked up a cute little Late Model in Cape May of all places. Used with a Lipo. Dunno what I'll do with it but at the price I got it for, for a car thats not even been out a year seemed to good to miss...

Picked up a cute little Late Model in Cape May of all places. Used with a Lipo. Dunno what I'll do with it but at the price I got it for, for a car thats not even been out a year seemed to good to miss...

You go to Mr. Bigstuff's? When we were in Cape May a week or so ago I stopped in there and ran a Losi LM on Carpet for about 25 minutes. LOL.

You go to Mr. Bigstuff's? When we were in Cape May a week or so ago I stopped in there and ran a Losi LM on Carpet for about 25 minutes. LOL.

Yes Sir :) He got a nice new space (his old store was a 3rd of the size)... They're racing Sunday morning. Gonna go along for a hoot!

You go to Mr. Bigstuff's? When we were in Cape May a week or so ago I stopped in there and ran a Losi LM on Carpet for about 25 minutes. LOL.

WANKER! why wasn't I told about this? George W will have some explaining to do.

Picked up a cute little Late Model in Cape May of all places. Used with a Lipo. Dunno what I'll do with it but at the price I got it for, for a car thats not even been out a year seemed to good to miss...


bring it out this fall at xtreme!!!

bring it out this fall at xtreme!!!

Thinking about it. 18th Scale Oval wasn't very popular there, maybe it will pick up with the arrival of this model of the AE RC18v2 chassis. Will see Dom.

WANKER! why wasn't I told about this? George W will have some explaining to do.

It's about 10 minutes from the house too LOL. We just happened to find it driving around looking for stuff.

It's about 10 minutes from the house too LOL. We just happened to find it driving around looking for stuff.

I wanted to go the aviation center too but never got around to it. Oh well there's always next year or the year after I should say.

I wanted to go the aviation center too but never got around to it. Oh well there's always next year or the year after I should say.

We hit up the aviation museum too LOL. It was a busy 3 days!

We hit up the aviation museum too LOL. It was a busy 3 days!

where is that Adam ?

where is that Adam ?

It's located at the airport. We found a flyer at one of the shops by the beach, my phone GPS found it with a search & drove us right there. If your up to it hit the Cape May Winery as well. If you like sweet & tasty wines check out the Victorian Blush its pretty good. We brought home 6 bottles for family & ourselves LOL.

It's located at the airport. We found a flyer at one of the shops by the beach, my phone GPS found it with a search & drove us right there. If your up to it hit the Cape May Winery as well. If you like sweet & tasty wines check out the Victorian Blush its pretty good. We brought home 6 bottles for family & ourselves LOL.

thanks man. prolly check them out.

Hey Guys. Been almost 2 weeks since I touched an RC car...got to tell you I'm jonesing for a fix :(
Brian and I got our fix at the track today: 5 1/2 hrs. We missed you.:(

Brian and I got our fix at the track today: 5 1/2 hrs. We missed you.:(

:( seems like an eternity since I was up there...Is Dan's Dew body still blowing around in the wind like a tumbleweed ??

On a positive node its given me time to order a few parts to hopefully reduce the noise from my rc8e coffee-grinder drive-line.

Been working on acquiring bits n pieces for indoor season too...figured I'd have a few packages waiting for me when I got home :thumbsup:

:( seems like an eternity since I was up there...Is Dan's Dew body still blowing around in the wind like a tumbleweed ??

On a positive node its given me time to order a few parts to hopefully reduce the noise from my rc8e coffee-grinder drive-line.

Been working on acquiring bits n pieces for indoor season too...figured I'd have a few packages waiting for me when I got home :thumbsup:
Yup, Dew is still there.

Your RC8e doesn't seem any louder than my Tekno 8.

Yup, Dew is still there.

Your RC8e doesn't seem any louder than my Tekno 8.

Cool. There is a slight warp in the rear center CVD. I noticed it during the build and tried to get some sympathy from Tekno and Amain but they didn't seem to want to offer alot of help, and of course I needed to have the car ready for the following weekend. Like Dan said, I've probably caused some additional damage elsewhere by running it, and I suspect the center diff could use new bearings as a consequence (I'll prolly just replace the center diff to be sure, as I have a spare one I picked up in a trade anyways). I already replaced the rear diff (after that failed in the main a few races ago) and pinion-drive gears so I hoping they aren't affected.

that's funny, my 2wd sc mod isn't that loud, and just as fast!!!

This is probably old news, but I was browsing August 2010 R/C Car and saw YET ANOTHER TRAXXAS Slash tire is out/coming out
http://rccaraction.com/ME2/dirmod.asp?sid=E29CAE68A6D4457BA0FB171BEC7D56D2&nm=Site+Features&type=news&mod=News&mid=9A02E3B96F2A415ABC72CB5F516B4C10&tier=3&nid=A21046C02FAE4CADBC28B531B1F527E7

Its another S1 compound, so not allowed in our Spec class.

that's funny, my 2wd sc mod isn't that loud, and just as fast!!!

My RC8e will eat your Blitz for breakfast :thumbsup:

Hey Nick, Not sure if your on vacation, but will you be posting the last 2 races results .

Also, was there a theory behind posting the rules in PDF ? Just wondering.

Thinking about it. 18th Scale Oval wasn't very popular there, maybe it will pick up with the arrival of this model of the AE RC18v2 chassis. Will see Dom.

18th latemodel stock out the box was probably the most fun class chris has ever run in that store everyone was fairly even and the class was cheap , WE SHOULD BRING IT BACK !!! im sure we could make up some rules to get the ass's included in the class, oops abbrevation for associated LOL,i know most of us still have them collecting dust on the shelf:thumbsup:

Hope to see some DR faces up at Station 2 tomorrow.
Toby, Nick has'nt gotten the results from me yet. I will get them to him tonight.

Hope to see some DR faces up at Station 2 tomorrow.
Toby, Nick has'nt gotten the results from me yet. I will get them to him tonight.

No worries Sir. Have a great day at Station2 tomorrow.hope the weather cooperates.

Nick, you should have 2 emails from me the second one I think has both weeks results.

Toby, the forecast for tomorrow is awesome. Sunny and 85 and almost no humidity. Who could ask for better than that?

Toby, the forecast for tomorrow is awesome. Sunny and 85 and almost no humidity. Who could ask for better than that?

Sweet! Have a great day of racing, Station2 Style!

Toby, the forecast for tomorrow is awesome. Sunny and 85 and almost no humidity. Who could ask for better than that?

to have that on a DR weekend would be nice:tongue:

Also, was there a theory behind posting the rules in PDF ? Just wondering.

I figured, what the hey, why not? :)

The file size was smaller as well and I think will print better if anyone wants to waste a ream of paper.

I don't have the 7-25 results to post, but here are last weeks and the current standings.

Http://www.DirtRunners.com

Results:
http://www.dirtrunners.com/documents/Mains%2008-01-2010.htm
Standings:
http://www.dirtrunners.com/documents/Standings%2008-01-2010.htm
Records:
http://www.dirtrunners.com/documents/OutdoorRecords_2010.htm

Dan,Bob: Are those Losi DLM2 new late model tires a must for the oval or are last years tires capable of keeping up since we are so over powered? Plan on trying to make it up this weekend.

Dan,Bob: Are those Losi DLM2 new late model tires a must for the oval or are last years tires capable of keeping up since we are so over powered? Plan on trying to make it up this weekend.

Some perfer the DLM 1 or OFNA tires and some prefer the DLM2 tire.

DLM2 seem to have more forward bite and less side bite. I have used both and find the car looser on DLM2, but more than drivable. Toby has TQed and won (I believe) on DLM2.

Dan,Bob: Are those Losi DLM2 new late model tires a must for the oval or are last years tires capable of keeping up since we are so over powered? Plan on trying to make it up this weekend.

I use the ofna tires and I have no problems. Unless I'm the exception to the rule.:thumbsup:

Ahhh...my last week on hobbytalk at work.